SavedAdd your journal

Journals / Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi / 2004 / Cilt: 4 - Sayı: 1-2

Definition of diamond circular saws in stone cutting and mechanism of chipping formation

Doğaltaş kesmede kullanılan elmaslı dairesel testerelerin tanıtımı ve talaş oluşum mekanizması

İ.Sedat BÜYÜKSAĞİŞ
Pages
17–30
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The relationship of these parameters with the mechanism of chipping formation is established.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The most frequently used cutting tools in the cutting process of marble industry are diamond circular saws.
📊
Key Findings & Data:Machine conditions, design and operating parameters, properties of cut rocks significantly influence cutting performance of the saws.
💡
Conclusion & Impact:The relationship of these parameters with the mechanism of chipping formation is established.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The most frequently used cutting tools in the cutting process of marble industry are diamond circular saws. Machine conditions, design and operating parameters, properties of cut rocks significantly influence cutting performance of the saws. In this study, cutting and design parameters of the diamond circular saws are explained. The relationship of these parameters with the mechanism of chipping formation is established.

Özet

Endüstriyel taş sektöründe kesme işlerinde kullanılan ekipmanlar arasında en çok kullanılan kesme aracı elmaslı dairesel testerelerdir. Bu testerelerin makine şartları, tasarım ve çalışma parametreleri, kesilecek kaya özellikleri kesme verimini önemli derecede etkilemektedir. Bu çalışmada, genel olarak elmaslı dairesel testerelerin kesme ve tasarım parametreleri açıklanmıştır. Bu parametrelerin talaş oluşum mekanizması ile ilişkisi belirtilmiştir.

🔖

Cite This Article

BÜYÜKSAĞİŞ, İ. (2022). Definition of diamond circular saws in stone cutting and mechanism of chipping formation. Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, Cilt: 4 - Sayı: 1-2, 17–30. https://ajindex.com/articles/429526

References (1)

  1. WRIGHT D. N., JENNINGS M., 2/1989, Guidelines for sawing stone Industrial Diamond Review, 70 -75, (1989). 2.TONSHOFF H. K., WOBKER, H.G., PRZYWARA, R., 3/1993, Das Arbeitsverhalten von Werkzeugen zum Trennschleifen von Gestein, 198-205 ff, Industrie Diamanten Rundschaue, (1993). 3.AKKURT M., Talaş Kaldırma Yöntemleri ve Takım Tezgahları, Birsen Yayınevi, 348, İstanbul, (1996). 4.ERTINGHAUSEN W., Zerspannung von Granit mit Diamant trennschleif scheiben, Dr.-Ing. Dissertation, Universität Hannover, (1985). 5.KARAGÖZ Ş., ZEREN M., The microstructrual desing of the diamond cutting tools, 1.st International Powder Metallurgy Congress, Gazi Üniversity, 459, Ankara, (1996). 6.ERSOY A., ATICI Ü., Mermer Kesicilerinin Aşınma Mekanizmaları, 16. Türkiye Madencilik Kongresi, (1999) 7.ÜNVER B., Kayaların testerelerle kesilebilirliğinin pratik olarak belirlenebilmesi için istatistiksel bir yaklaşım, Madencilik Dergisi, V XXXI, No 3, 17 -25, Ankara, (1992). 8.ÜNVER B., A statistical method for practical assessment of sawability of rocks, Eurock’96 ISRM International Symposium, 59-65, Torino, (1996). 9.BÜYÜKSAĞİŞ İ. S., Dairesel Testereli Blok Kesme Makinelerinde Mermerlerin Kesilebilirlik Analizleri, OGÜ, FBE., Maden Müh. ABD. Doktora Tezi, Eskişehir, (1998). 10.BIENERT P., Kreissägen von Beton mit Diamantwerkzeugen, Dr. - Ing. Dissertation, Universität Hannover, (1978). 11.PURTSCHELLER F.,HAUSBERGER P.,115/1991,Bearbeitungsverhalten von Naturstein beim Sägen mit Diamant, Schleifen und Trennen, Seite 4 - 11, Deutschland. 12.TONSHOFF H. K., MÜNZ U. V., AHLBORN D., PRZYWARA R., 1/1993, Schwingungs vorgänge beim Trennschleifen von Gestein, 15, Industrie Diamanten Rundschaue. 13.WOBKER H. G., PRZYWARA R., Trennschleifen von Beton und Naturstein, Bauverfahrenstechnik, Februar, 9 – 13, (1994). 14.MALKİN S., Grinding Technology-Theory and Application of Machining with Abrasives Chichester, (1989). 15.CASSAPI V. B., Application of Rock Hardness and Abrasive Indexing to Rock Excavating Equipment Selection, Ph.D.Thesis, University of Nottigham, 362, U.K, (1987).