SavedAdd your journal

Journals / Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi / 2000 / Cilt: 2 - Sayı: 1

Bir kompozit kutu kirişin kesit analizi

Cross-section analysis of a composite box beam

Ömer SOYKASAP
Pages
109–120
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The sensitivity results give the most important parameters affecting the stiffnesses of the box-beam.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Cross-sectional analysis of a composite box-beam is performed by an analytical method and a variational-asymptotical method.
📊
Key Findings & Data:The beam stiffness coefficients are obtained and compared for both analytical and variational-asymptotical methods.
💡
Conclusion & Impact:The sensitivity results give the most important parameters affecting the stiffnesses of the box-beam.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Cross-sectional analysis of a composite box-beam is performed by an analytical method and a variational-asymptotical method. The beam stiffness coefficients are obtained and compared for both analytical and variational-asymptotical methods. The parameters of box-beam width and height, wall thicknesses, initial twist and composite orientation angle are selected for the sensitivity of box-beam stiffnesses. The sensitivity results give the most important parameters affecting the stiffnesses of the box-beam.

Özet

Bir kompozit kutu kirişin kesit analizi analitik ve variasyonel asimptotik yöntemlerle yapılmıştır. Kiriş katılık katsayıları hem sayısal hem de variasyonel asimptotik yöntemle bulunmuş ve karşılaştırılmıştır. Kutu kiriş katılık hassasiyetleri için kutu kiriş genişliği, yüksekliği, duvar kalınlıkları, ön-burulma ve kompozit yönlenme açısı parametreleri seçilmiştir. Hassasiyet değerleri her bir kutu kiriş katılığı etkileyen en önemli parametreleri vermektedir.

🔖

Cite This Article

SOYKASAP, Ö. (2022). Bir kompozit kutu kirişin kesit analizi. Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, Cilt: 2 - Sayı: 1, 109–120. https://ajindex.com/articles/429559

References (1)

  1. Hodges, D.H., A Review of Composite Rotor Blade Modeling, AIAA Journal, 28(3), 561-565 (1990). 2.Mansfield, E.H., Sobey, A.J., The Fiber Composite Helicopter Blade -Part I: Stiffness Properties - Part II: Prospects for Aeroelastic Tailoring, Aeronautical Quarterly, 30, 413-449 (1979). 3.Worndle, R., Calculation of the Cross Section Properties and the Shear Stresses of Composite Rotor Blades, Vertica, 6, 111-129 (1982). 4.Rehfield, L.W., Design Analysis Methodology for Composite Rotor Blades, Proceedings of Seventh DoD/NASA Conference on Fibrous Composites in Structural Design, Denver, Colorado, (1985). 5.Giavotto, V., Borri, M., Mantegazza, P., Ghringhelli, G., Carmashi, V., Maffioli, G.C., Massi, F., Anisotropic Beam Theory and Application, Computers and Structures, 16, 403-413 (1983). 6.Hodges, D.H., Nixon, M.W., Rehfield, L.W., Comparison of Composite Rotor Blade Models: A Coupled Beam Analysis and MSC/NASTRAN Finite Element Model, NASA TM 89024, (1987). 7.Smith, E.C., Chopra, I., Formulation and Evaluation of an Analytical Model for Composite Box Beams, Journal of American Helicopter Society, 36 (3), 23-25 (1991). 8.Berdicevsky, V., Armanios, E., Badir, A., Theory of Anisotropic Thin-Walled Closed-Cross-Section Beams, Composites Engineering, 2 (5-7), 411-432(1992). 9.Cesnik, C.E.S., Hodges, D.H., Atilgan, A.R., Variational-Aysmptotical Analysis of Initially Twisted and Curved Composite Beams, Proceedings of the 33rd Structures, Structural Dynamics and Material Conference, Dallas, Texas, (1992). 10.Cesnik, C.E.S., Hodges, D.H., VABS: A New Concept for Composite Rotor Blade Cross-Sectional Modeling, Proceedings of the 56th Annual Forum of American Helicopter Society, Fort Worth, Texas, 1627-1640 (1992). 11.Soykasap, Ö., Aeroelastic Optimization of a Composite Tilt Rotor, Ph.D. Dissertation, School of Aerospace Engineering, Georgia Institute of Technology, U.S.A, (1999).