In addition, the stress corrosion behavior of coated and uncoated specimens in nitric acid solution was compared.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:In this work, TS Fe37 steel parts were coated with pure zinc, ZnA15 and ZnA125 alloys using hot dipping technique, and the effect of bath temperature and dipping time on the thickness, structure and adhesion quality of the coatings were examined.
📊
Key Findings & Data:In this work, TS Fe37 steel parts were coated with pure zinc, ZnA15 and ZnA125 alloys using hot dipping technique, and the effect of bath temperature and dipping time on the thickness, structure and adhesion quality of the coatings were examined.
💡
Conclusion & Impact:In addition, the stress corrosion behavior of coated and uncoated specimens in nitric acid solution was compared.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters
Abstract
In this work, TS Fe37 steel parts were coated with pure zinc, ZnA15 and ZnA125 alloys using hot dipping technique, and the effect of bath temperature and dipping time on the thickness, structure and adhesion quality of the coatings were examined. In addition, the stress corrosion behavior of coated and uncoated specimens in nitric acid solution was compared.
Özet
Bu çalışmada, TS Fe37 standardına uygun çelik parçalar sıcak daldırma yöntemiyle saf çinko ve çinko-alüminyum alaşımlarıyla (ZnA15 ve ZnA125) kaplanarak, banyo sıcaklığı ve daldırma süresinin kaplama kalınlığına, kaplama tabakasının yapısına ve yapışma kalitsine etkileri incelendi. Ayrıca, söz konusu metal ve alaşımlarla kaplanan örnekler ile kaplanmamış örneklerin nitrik asit çözeltisi içerisindeki gerilmeli korozyon davranışları karşılaştırıldı.
🔖
Cite This Article
SAVAŞKAN, T., KÜÇÜKÖMEROĞLU, T., ALTUN, H. (1999). Çelik parçaların sıcak daldırma yöntemiyle çinko ve çinko-alüminyum alaşımı kaplanması. Mühendis ve Makina, Cilt: 40 - Sayı: 468, 26–31. https://ajindex.com/articles/289624