SavedAdd your journal

Journals / Turkish Journal of Engineering and Environmental Sciences / 2000 / Cilt: 24 - Sayı: 1

Wear Behaviour of Zinc-Aluminium Alloys and the Bearings Produced from these Alloys

TEMEL SAVAŞKAN
Gençağa PÜRÇEK
Pages
25–34
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The wear results obtained from the alloys tested by a pin-on-disc machine were found to be in a good agreement with the wear results obtained from the bearings produced from these alloys.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, two ternary zinc-aluminum-copper and two quaternary zinc-aluminum-copper-silicon alloys were produced by permanent mould casting.
📊
Key Findings & Data:The wear resistance of zinc-aluminum based alloys was found to be higher than that of CuSn12 bronze. ın addition, the bearings produced from the zinc-aluminum based alloys were found to be more wear resistant than the bearing produced from CuSn12 bronze.
💡
Conclusion & Impact:The wear results obtained from the alloys tested by a pin-on-disc machine were found to be in a good agreement with the wear results obtained from the bearings produced from these alloys.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Zinc-aluminum alloys · journal bearings · wear

Abstract

In this study, two ternary zinc-aluminum-copper and two quaternary zinc-aluminum-copper-silicon alloys were produced by permanent mould casting. The wear behaviour of these alloys were investigated with a pin-on-disc machine The wear behaviour of the journal bearings produced from these alloys was investigated with a bearing test rig. The wear resistance of zinc-aluminum based alloys was found to be higher than that of CuSn12 bronze. ın addition, the bearings produced from the zinc-aluminum based alloys were found to be more wear resistant than the bearing produced from CuSn12 bronze. Of the alloys tested, the best wear performance was obtained with the ZnAl40CuSi1 alloy, while the bearing produced from this alloy had the highest wear resistance of the bearings tested. The wear results obtained from the alloys tested by a pin-on-disc machine were found to be in a good agreement with the wear results obtained from the bearings produced from these alloys.

Özet

In this study, two ternary zinc-aluminum-copper and two quaternary zinc-aluminum-copper-silicon alloys were produced by permanent mould casting. The wear behaviour of these alloys were investigated with a pin-on-disc machine The wear behaviour of the journal bearings produced from these alloys was investigated with a bearing test rig. The wear resistance of zinc-aluminum based alloys was found to be higher than that of CuSn12 bronze. ın addition, the bearings produced from the zinc-aluminum based alloys were found to be more wear resistant than the bearing produced from CuSn12 bronze. Of the alloys tested, the best wear performance was obtained with the ZnAl40CuSi1 alloy, while the bearing produced from this alloy had the highest wear resistance of the bearings tested. The wear results obtained from the alloys tested by a pin-on-disc machine were found to be in a good agreement with the wear results obtained from the bearings produced from these alloys.

🔖

Cite This Article

SAVAŞKAN, T., PÜRÇEK, G. (2000). Wear Behaviour of Zinc-Aluminium Alloys and the Bearings Produced from these Alloys. Turkish Journal of Engineering and Environmental Sciences, Cilt: 24 - Sayı: 1, 25–34. https://ajindex.com/articles/369339

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...