SavedAdd your journal

Journals / Journal of the Turkish Chemical Society Section B: Chemical Engineering / 2026 / Volume: 2026 Issue: 2

Mechanical, Thermal, and Morphological Characterization of Polyethylene Glycol–Modified Epoxy Composites

Mukaddes Karataş(FIRAT UNIVERSITY, FACULTY OF ENGINEERING)0000-0001-5803-6821
Ercan Aydoğmuş(FIRAT UNIVERSITY, FACULTY OF ENGINEERING)0000-0002-1643-2487
Buket Erzen(FIRAT UNIVERSITY, FACULTY OF ENGINEERING)0000-0001-5098-7171
Ramazan Orhan(FIRAT UNIVERSITY, FACULTY OF ENGINEERING)0000-0003-2287-4238
Pages
—
Publication Date
2026-06-21
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results demonstrated that PEG incorporation significantly altered the physical and mechanical behavior of the epoxy matrix.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Abstract : Polyethylene glycol (PEG) has emerged as a promising modifier for enhancing the toughness and thermomechanical performance of epoxy-based materials.
📊
Key Findings & Data:In this study, epoxy composites reinforced with different PEG contents (3–18 wt.%) were successfully fabricated and systematically characterized to reveal the role of PEG in tailoring the multifunctional performance of epoxy systems.
💡
Conclusion & Impact:The results demonstrated that PEG incorporation significantly altered the physical and mechanical behavior of the epoxy matrix.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:: Epoxy composite · polyethylene glycol · mechanical properties

Abstract

Abstract : Polyethylene glycol (PEG) has emerged as a promising modifier for enhancing the toughness and thermomechanical performance of epoxy-based materials. However, the combined influence of PEG incorporation on the mechanical, thermal, and morphological behavior of epoxy composites has not yet been comprehensively clarified. In this study, epoxy composites reinforced with different PEG contents (3–18 wt.%) were successfully fabricated and systematically characterized to reveal the role of PEG in tailoring the multifunctional performance of epoxy systems. The composites were evaluated through bulk density, Shore D hardness, tensile testing, and thermal conductivity measurements, while Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) analyses were conducted to investigate structural interactions and fracture morphology. The results demonstrated that PEG incorporation significantly altered the physical and mechanical behavior of the epoxy matrix. Increasing PEG content reduced the Shore D hardness from 77.5 for neat epoxy to 65.7 at 18 wt.% PEG, indicating enhanced flexibility within the crosslinked network. In contrast, thermal conductivity increased markedly from 0.112 to 0.148 W·m⁻¹·K⁻¹ with increasing PEG concentration, demonstrating the beneficial role of PEG in promoting heat transfer through the polymer matrix. Tensile analysis revealed that the composite containing 10 wt.% PEG exhibited the most balanced mechanical performance, achieving an ultimate tensile strength of approximately 60–61 MPa together with a significantly increased strain at failure of 3.5–3.7%, indicating improved ductility and toughness without substantial strength loss. FTIR results confirmed that PEG modified the epoxy matrix primarily through physical interactions rather than chemical bonding, while SEM observations revealed enhanced plastic deformation and energy absorption mechanisms. These findings provide new insight into the multifunctional role of PEG as a flexible performance modifier and demonstrate its potential for designing epoxy composites with simultaneously improved toughness and thermal transport properties for advanced engineering applications.

🔖

Cite This Article

Karataş, M., Aydoğmuş, E., Erzen, B., Orhan, R. (2026). Mechanical, Thermal, and Morphological Characterization of Polyethylene Glycol–Modified Epoxy Composites. Journal of the Turkish Chemical Society Section B: Chemical Engineering, Volume: 2026 Issue: 2. https://doi.org/10.58692/jotcsb.1914166

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (64)

  1. Abdollahi, H., Salimi, A., Barikani, M., Samadi, A., Hosseini Rad, S., & Zanjanijam, A. R. (2019). Systematic investigation of mechanical properties and fracture toughness of epoxy networks: Role of the polyetheramine structural parameters. Journal of Applied Polymer Science, 136(9), 47121. https://doi.org/10.1002/app.47121
  2. Ahmadi-Khaneghah, A., Omidi-Ghallemohamadi, M., & Behniafar, H. (2019). PEG-based epoxy and epoxy/silica networks: Thermal, mechanical, and thermo-mechanical investigations. International Journal Of Adhesion And Adhesives, 95, 102430. https://doi.org/10.1016/j.ijadhadh.2019.102430
  3. Ankit, Kumar, V., Yadav, A. K., Gautam, G., Singh, K. K., & Mohan, S. (2023). Prediction of tribological performance of Cu–Gr–TiC composites based on response surface methodology and worn surface analysis. Physica Scripta, 98(11), 115971. https://doi.org/10.1088/1402-4896/acff8d
  4. Boonlert-Uthai, T., Samthong, C., & Somwangthanaroj, A. (2019). Synthesis, thermal properties and curing kinetics of hyperbranched BPA/PEG epoxy resin. Polymers, 11(10), 1545. https://doi.org/10.3390/polym11101545
  5. Buketov, A. V., Maruschak, P., Sapronov, O., Zinchenko, D. O., Yatsyuk, V. M., & Panin, S. V. (2016). Enhancing performance characteristics of equipment of sea and river transport by using epoxy composites. Transport, 31(3), 333–342. https://doi.org/10.3846/16484142.2016.1212267
  6. Choudhary, P. K., Nanda, B. P., & Satapathy, A. (2022). Development, characterization, and parametric analysis of dry sliding wear behavior of epoxy–short betel nut fiber composite using response surface method and neural computation. Polymers and Polymer Composites, 30, 096739112110667. https://doi.org/10.1177/09673911211066722
  7. Deng, J., Dai, Z., & Deng, L. (2020). Synthesis of crosslinked PEG/IL blend membrane via one-pot thiol–ene/epoxy chemistry. Journal of Polymer Science, 58(18), 2575–2585. https://doi.org/10.1002/pol.20190195
  8. Domun, N., Hadavinia, H., Zhang, T., Sainsbury, T., Liaghat, G., & Vahid, S. (2015). Improving the fracture toughness and the strength of epoxy using nanomaterials: A review of the current status. Nanoscale, 7(23), 10294–10329. https://doi.org/10.1039/c5nr01354b
  9. Durukan, S. N., Beylergil, B., & Dulgerbaki, C. (2022). Effects of silane-modified nano-CaCO₃ particles on the mechanical properties of carbon fiber/epoxy composites. Polymer Composites, 44(3), 1805–1821. https://doi.org/10.1002/pc.27206 Fang, Y., Kang, H., Wang, W., Liu, H., & Gao, X. (2010). Study on polyethylene glycol/epoxy resin composite as a form-stable phase change material. Energy Conversion and Management, 51(12), 2757–2761. https://doi.org/10.1016/j.enconman.2010.06.012
  10. Farooq, U., Teuwen, J., & Dransfeld, C. (2020). Toughening of Epoxy Systems with Interpenetrating Polymer Network (IPN): A Review. Polymers, 12(9), 1908. https://doi.org/10.3390/polym12091908
  11. Ferdosian, F., Yuan, Z., Anderson, M., & Xu, C. C. (2016). Thermal performance and thermal decomposition kinetics of lignin-based epoxy resins. Journal of Analytical and Applied Pyrolysis, 119, 124–132. https://doi.org/10.1016/j.jaap.2016.03.009
  12. Ganesh, S., Swaminathan, R., Palani, V., Madhu, S., Sankaranarayanan, N., & Ganesan, S. (2021). Investigation on the mechanical properties of ramie/kenaf fibers under various parameters using GRA and TOPSIS methods. Polymer Composites, 43(1), 130–143. https://doi.org/10.1002/pc.26362
  13. Gour, R., Raut, K., & Badiger, M. (2017). Flexible epoxy novolac coatings: Use of cardanol‐based flexibilizers. Journal of Applied Polymer Science, 134(23). https://doi.org/10.1002/app.44920
  14. Guo, X., Wei, K., Ni, T., Shi, W., Dai, C., Zhao, Z., & Gu, Z. (2024). Preparation and performance analysis of polyethylene glycol/epoxy resin composite phase change material. Journal of Energy Storage, 88, 111525. https://doi.org/10.1016/j.est.2024.111525
  15. Hassan, M. Z., Roslan, S. A., Sapuan, S. M., Rasid, Z. A., Nor, A. F. M., Daud, Y., & Zuhri, M. (2020). Mercerization optimization of bamboo (Bambusa vulgaris) fiber-reinforced epoxy composite structures using a Box–Behnken design. Polymers, 12(6), 1367. https://doi.org/10.3390/polym12061367
  16. Hosseini, S. and Nikje, M. (2023). Synthesis and characterization of novel epoxy‐urethane coating and its graphene nanocomposites. Polymer Composites, 44(5), 2794-2803. https://doi.org/10.1002/pc.27280
  17. Hu, B., Xia, H., Zhang, Q., Liu, F., & Ni, Q. Q. (2023). Multi-stimuli temperature, reusable, recyclable, and healable shape-memory epoxy–PEG multifunctional films by regulating polyethylene glycol. Progress in Organic Coatings, 174, 107309. https://doi.org/10.1016/j.porgcoat.2022.107309
  18. Hussin, R., Sharif, S., Nabiałek, M., Rahim, S. Z. A., Khushairi, M. T. M., Suhaimi, M. A., & Błoch, K. (2021). Hybrid mold: Comparative study of rapid and hard tooling for injection molding application using metal epoxy composite (MEC). Materials, 14(3), 665. https://doi.org/10.3390/ma14030665
  19. Jang, J. B., Kim, T. H., Kim, T., Kim, H. J., Seo, B., Lim, C., & Lee, W. (2019). Modified epoxy resin synthesis from phosphorus-containing polyol and physical changes studies in the synthesized products. Polymers, 11(12), 2116. https://doi.org/10.3390/polym11122116
  20. Jayan, J. S., Saritha, A., Deeraj, B., & Joseph, K. (2020). Graphene oxide as a prospective graft in polyethylene glycol for enhancing the toughness of epoxy nanocomposites. Polymer Engineering & Science, 60(4), 773–781. https://doi.org/10.1002/pen.25335
  21. Jayan, J., Saritha, A., & Joseph, K. (2018). Innovative materials of this era for toughening the epoxy matrix: A review. Polymer Composites, 39(S4). https://doi.org/10.1002/pc.24789
  22. Jin, F., Li, X., & Park, S. (2015). Synthesis and application of epoxy resins: A review. Journal of Industrial and Engineering Chemistry, 29, 1–11. https://doi.org/10.1016/j.jiec.2015.03.026
  23. Jin, L., Cao, W., Wang, P., Song, N., & Ding, P. (2022). Interconnected MXene/Graphene Network Constructed by Soft Template for Multi-Performance Improvement of Polymer Composites. Nano-Micro Letters, 14(1). https://doi.org/10.1007/s40820-022-00877-7
  24. Khare, K. S., Khabaz, F., & Khare, R. (2014). Effect of carbon nanotube functionalization on mechanical and thermal properties of cross-linked epoxy–carbon nanotube nanocomposites: Role of strengthening the interfacial interactions. ACS Applied Materials & Interfaces, 6(9), 6098–6110. https://doi.org/10.1021/am405317x
  25. Kim, T., Kim, S., Lee, D., Lim, C., & Seo, B. (2018). Preparation of a branched amine and physical and thermal studies of epoxy compositions including the amine compound. Journal of Applied Polymer Science, 135(19), 46233. https://doi.org/10.1002/app.46233
  26. Kostrzewa, M., Hausnerová, B., Bakar, M., & Dalka, M. (2011). Property evaluation and structure analysis of polyurethane/epoxy graft interpenetrating polymer networks. Journal of Applied Polymer Science, 122(3), 1722-1730. https://doi.org/10.1002/app.34070
  27. Kumar, D. S., & Rajmohan, M. (2018). Optimizing wear behavior of epoxy composites using response surface methodology and artificial neural networks. Polymer Composites, 40(7), 2812–2818. https://doi.org/10.1002/pc.25089
  28. Kumar, V., Gautam, G., Singh, A., Singh, V., & Mohan, S. (2022). Tribological behaviour of ZA/ZrB₂ in situ composites using response surface methodology and artificial neural network. Surface Topography: Metrology and Properties, 10(4), 045001. https://doi.org/10.1088/2051-672x/ac9426
  29. Livi, S., Chardin, C., Lins, L., Halawani, N., Pruvost, S., Duchet‐Rumeau, J., … & Baudoux, J. (2019). From Ionic Liquid Epoxy Monomer to Tunable Epoxy–Amine Network: Reaction Mechanism and Final Properties. Acs Sustainable Chemistry & Engineering, 7(3), 3602-3613. https://doi.org/10.1021/acssuschemeng.8b06271
  30. Luo, F., Xu, Y., Wang, D., Zhan, L., Feng, Y., Lin, B., … & Li, H. (2025). Tough and sustainable solid–solid phase change materials achieved via reversible crosslinking for thermal management. Materials Horizons, 12(12), 4238-4247. https://doi.org/10.1039/d5mh00113g
  31. Lu, L., Liu, X., Xu, W., Guan, J., Yu, K., Xia, C.,. & Cui, S. (2026). Mechanism and curing kinetics of epoxy resin toughened with polyethylene glycol modified Nanosilica. Polymer Bulletin, 83(5), 263. https://doi.org/10.1007/s00289-026-06319-3
  32. Mahnam, N., Beheshty, M. H., Barmar, M., & Shervin, M. (2013). Modification of dicyandiamide-cured epoxy resin with different molecular weights of polyethylene glycol and its effect on epoxy/glass prepreg characteristics. High Performance Polymers, 25(6), 705–713. https://doi.org/10.1177/0954008313483151
  33. Matykiewicz, D. (2020). Hybrid epoxy composites with both powder and fiber filler: A review of mechanical and thermomechanical properties. Materials, 13(8), 1802. https://doi.org/10.3390/ma13081802
  34. Min, Z., Wang, Q., Xie, Y., Xie, J., & Zhang, B. (2021). Influence of polyethylene glycol (PEG) chain on the performance of epoxy asphalt binder and mixture. Construction and Building Materials, 272, 121614. https://doi.org/10.1016/j.conbuildmat.2020.121614
  35. Misumi, J., Ganesh, R., Sockalingam, S., & Gillespie, J. W., Jr. (2016). Experimental characterization of tensile properties of epoxy resin by using micro-fiber specimens. Journal of Reinforced Plastics and Composites, 35(24), 1792–1801. https://doi.org/10.1177/0731684416669248
  36. Mohan, T. P., & Kanny, K. (2021). Processing of high weight fraction banana fiber reinforced epoxy composites using pressure induced dip casting method. Journal of Composite Materials, 55(17), 2301–2313. https://doi.org/10.1177/0021998320988044
  37. Mumtaz, N., Li, Y., Artiaga, R., Farooq, Z., Mumtaz, A., Guo, Q., … & Nisa, F. (2024). Fillers and methods to improve the effective (out-plane) thermal conductivity of polymeric thermal interface materials – A review. Heliyon, 10(3), e25381. https://doi.org/10.1016/j.heliyon.2024.e25381
  38. Nazerian, M., Naderi, F., Partovinia, A., Papadopoulos, A. N., & Younesi-Kordkheili, H. (2021). Modeling the bending strength of MDF faced, polyurethane foam-cored sandwich panels using response surface methodology (RSM) and artificial neural network (ANN). Forests, 12(11), 1514. https://doi.org/10.3390/f12111514
  39. Orhan, R., Aydoğmuş, E., Topuz, S., & Arslanoğlu, H. (2021). Investigation of thermo-mechanical characteristics of borax reinforced polyester composites. Journal of Building Engineering, 42, 103051. https://doi.org/10.1016/j.jobe.2021.103051
  40. Pang, Y., Zhang, Z., Li, L., Fan, Z., He, J., Fang, X.,. & Zhang, D. (2026). Hierarchical supramolecular engineering of a multifunctional phase‐change material with thermally switchable properties for adaptive thermal management. Advanced Functional Materials, 36(26), e23790. https://doi.org/10.1002/adfm.202523790
  41. Ratna, D., Samui, A., & Chakraborty, B. (2004). Flexibility improvement of epoxy resin by chemical modification. Polymer International, 53(11), 1882-1887. https://doi.org/10.1002/pi.1612
  42. Rifa'i, A. F., Kaavessina, M., & Distantina, S. (2025). Mechanical, morphological, and electrical properties of polylactic acid-based conductive polymer composites through polyethylene glycol and carbon nanotubes integration. Periodica Polytechnica Chemical Engineering, 69(1), 149-162. https://doi.org/10.3311/PPch.37876 Sajjad, M., Zhao, Z., Wahid, U., Zhu, X., & Zhang, C. (2024). SEPS functionalized PEG copolymer for improved toughness without obvious plasticization in epoxy resin. Journal of Applied Polymer Science, 141(41). https://doi.org/10.1002/app.56059
  43. Samanta, B. C., Maity, T., Dalai, S., & Banthia, A. K. (2006). Mechanical properties of modified epoxy: effect of chain length. Pigment & resin technology, 35(4), 216-223. https://doi.org/10.1108/03699420610677217
  44. Santiago, D. and Serra, À. (2022). Enhancement of Epoxy Thermosets with Hyperbranched and Multiarm Star Polymers: A Review. Polymers, 14(11), 2228. https://doi.org/10.3390/polym14112228
  45. Sha, W., & Edwards, K. (2007). The use of artificial neural networks in materials science based research. Materials & Design, 28(6), 1747–1752. https://doi.org/10.1016/j.matdes.2007.02.009
  46. Shen, M., Chang, T., Hsieh, T., Li, Y., Chiang, C., Yang, H., & Yip, M. (2013). Mechanical properties and tensile fatigue of graphene nanoplatelets reinforced polymer nanocomposites. Journal of Nanomaterials, 2013, 1–9. https://doi.org/10.1155/2013/565401
  47. Shi, X., Guangling, S., Li, S., Du, X., & Han, Y. (2022). Sound insulation properties of hollow polystyrene spheres/polyethylene glycol/epoxy composites. Polymers, 14(7), 1388. https://doi.org/10.3390/polym14071388
  48. Shreve, O. D., Heether, M. R., Knight, H. B., & Swern, D. (1951). Infrared absorption spectra of some epoxy compounds. Analytical Chemistry, 23(2), 277–282.
  49. Siddiqui, N. A., Woo, R. S., Kim, J. K., Leung, C. K. Y., & Munir, A. (2007). Mode I interlaminar fracture behavior and mechanical properties of CFRPs with nanoclay-filled epoxy matrix. Composites Part A: Applied Science and Manufacturing, 38(2), 449–460. https://doi.org/10.1016/j.compositesa.2006.03.001
  50. Singh, A., Chamola, R., Goyat, M., Paul, B., & Das, S. (2025). Effect of polyethylene glycol on rheological, thermo‐mechanical, and tribological behavior of epoxy. Polymer Engineering & Science, 65(3), 1433-1447. https://doi.org/10.1002/pen.27095
  51. Sinha, A., Khan, N., Das, S., Zhang, J., & Halder, S. (2017). Effect of reactive and non-reactive diluents on thermal and mechanical properties of epoxy resin. High Performance Polymers, 30(10), 1159-1168. https://doi.org/10.1177/0954008317743307
  52. Sumesh, K. R., & Kanthavel, K. (2020). Optimizing various parameters influencing mechanical properties of banana/coir natural fiber composites using grey relational analysis and artificial neural network models. Journal of Industrial Textiles, 51(4_suppl), 6705S–6727S. https://doi.org/10.1177/1528083720930304
  53. Sun, Q., Jiang, Y., Zhang, N., Ju, F., & Yuan, Y. (2025). Functionalized Polyethylene Glycol Composite Phase Change Materials: A Review. Advanced Engineering Materials, 27(21), e202501430. https://doi.org/10.1002/adem.202501430
  54. Swier, S., Van Assche, G., Vuchelen, W., & Van Mele, B. (2005). Role of complex formation in the polymerization kinetics of modified epoxy–amine systems. Macromolecules, 38(6), 2281–2288. https://doi.org/10.1021/ma047796x
  55. Tang, B., Kong, M., Yang, Q., Huang, Y., & Li, G. (2018). Toward simultaneous toughening and reinforcing of trifunctional epoxies by low loading flexible reactive triblock copolymers. RSC Advances, 8(31), 17380-17388. https://doi.org/10.1039/c8ra01017j
  56. Thakre, A. A. (2014). Prediction of erosion of polyetherimide and its composites using response surface methodology. Journal of Tribology, 137(1). https://doi.org/10.1115/1.4028267
  57. Thenmozhi, S. and Murugavel, S. (2019). Investigation on mechanical, thermal, and flame retardant properties of particulate SiO2 reinforced cardanol based composites. Polymer Composites, 41(3), 1118-1134. https://doi.org/10.1002/pc.25443
  58. Yao, F., Wu, Q., Lei, Y., Guo, W., & Xu, Y. (2008). Thermal decomposition kinetics of natural fibers: Activation energy with dynamic thermogravimetric analysis. Polymer Degradation and Stability, 93(1), 90–98. https://doi.org/10.1016/j.polymdegradstab.2007.10.012
  59. Zavareh, S., & Samandari, G. (2013). Polyethylene glycol as an epoxy modifier with extremely high toughening effect: Formation of nanoblend morphology. Polymer Engineering & Science, 54(8), 1833–1838. https://doi.org/10.1002/pen.23733
  60. Zhang, J., Chai, J., Lei, L., & Hao, Y. (2026). Effects of Polyethylene Glycol on Cryogenic Tensile Strength, Impact Toughness, and Gas Barrier Properties of Epoxy Resins: Mechanism and Experiment. Polymer Engineering & Science, 143(6), e58178. https://doi.org/10.1002/app.58178
  61. Zhang, M., Li, X. H., Gong, Y. D., Zhao, N. M., & Zhang, X. F. (2002). Properties and biocompatibility of chitosan films modified by blending with PEG. Biomaterials, 23(13), 2641-2648. https://doi.org/10.1016/S0142-9612(01)00403-3
  62. Zheng, Y., Liu, T., He, H., Lv, Z., Xu, J., Ding, D., Dai, L., Huang, Z., & Si, C. (2023). Lignin-based epoxy composite vitrimers with light-controlled remoldability. https://doi.org/10.21203/rs.3.rs-2400094/v1
  63. Lu, L., Liu, X., Xu, W., Guan, J., Yu, K., Xia, C.,. & Cui, S. (2026). Mechanism and curing kinetics of epoxy resin toughened with polyethylene glycol modified Nanosilica. Polymer Bulletin, 83(5), 263. https://doi.org/10.1007/s00289-026-06319-3
  64. Pang, Y., Zhang, Z., Li, L., Fan, Z., He, J., Fang, X.,. & Zhang, D. (2026). Hierarchical supramolecular engineering of a multifunctional phase‐change material with thermally switchable properties for adaptive thermal management. Advanced Functional Materials, 36(26), e23790. https://doi.org/10.1002/adfm.202523790