Dergiler / Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2021 / Cilt: 11 - Sayı: 3

Hidrotermal Olarak Yaşlandırılmış Hibrit Aramid/Cam/Epoksi Kompozitlerin Su EmmeDavranışlarının İncelenmesi

Investigation of the Water Absorption Behavior of Hydrothermally Aged Hybrid Aramid/Glass/Epoxy Composites

Sayfa
2255–2267
Yayın Tarihi
2022-10-18
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Numunelerin L $w^{-1}$ oranının artması her iki sıcaklık ve su tipinde de daha fazla su emilimine sebepolduğu belirlenmiştir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Bu çalışmada hidrotermal yaşlanmaya maruz bırakılan hibrit aramid/cam/epoksi kompozitnumunelerinin su emilim davranışları deneysel olarak araştırılmıştır.
📊
Temel Bulgular & Veri:Vakum destekli reçine infüzyon yöntemi(VARIM) ile üretilen kompozit numuneler saf su ve deniz suyunda 25°C ve 70°C sıcaklıkta 1000 saat boyuncakontrol edilebilir bir yaşlandırma kabininde bekletilmiştir.
💡
Sonuç & Katkı:Numunelerin L $w^{-1}$ oranının artması her iki sıcaklık ve su tipinde de daha fazla su emilimine sebepolduğu belirlenmiştir.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Bu çalışmada hidrotermal yaşlanmaya maruz bırakılan hibrit aramid/cam/epoksi kompozitnumunelerinin su emilim davranışları deneysel olarak araştırılmıştır. Vakum destekli reçine infüzyon yöntemi(VARIM) ile üretilen kompozit numuneler saf su ve deniz suyunda 25°C ve 70°C sıcaklıkta 1000 saat boyuncakontrol edilebilir bir yaşlandırma kabininde bekletilmiştir. Farklı uzunluk $genişlik^{-1}$ (L $w^{-1}$ ) oranlarında, 10 ve 15, hazırlanan hibrit kompozitlerin su emilim özellikleri su tipi, sıcaklık ve kompozit katman dizilimi gibi faktörleregöre değerlendirilmiştir. Hibrit kompozit numunelerin su emilim sonuçları, sıcaklığın su emiliminde etkiliolduğunu, sıcaklık artışının daha fazla su emilimine neden olduğunu göstermiştir. Ayrıca, her iki sıcaklıkta saf suile kıyaslandığında, deniz suyunda yaşlandırılan numuneler genellikle daha fazla su emmiştir. Su alım deneyleri,hibrit kompozit numunelerde katman dizilim şeklinin maksimum su alım oranında son derece etkili olduğunugöstermiştir. Numunelerin L $w^{-1}$ oranının artması her iki sıcaklık ve su tipinde de daha fazla su emilimine sebepolduğu belirlenmiştir.

Abstract

In this study, water absorption behaviors of hybrid aramid/glass/epoxy composite samples exposedto hydrothermal aging were experimentally investigated. Composite samples produced by vacuum assisted resininfusion method (VARIM) were kept in distilled water and sea water at 25°C and 70°C for 1000 hours in acontrollable aging cabin. The water absorption properties of hybrid composites prepared at different length width 1 (L $w^{-1}$) ratios, 10 and 15, were evaluated according to factors such as water type, temperature and compositelayer sequence. The water absorption results of the hybrid composite samples showed that temperature is effectivein water absorption and the increase in temperature causes more water absorption. Also, samples aged in seawatergenerally absorbed more water than distilled water at both temperatures. Water intake experiments have shownthat the stacking sequence of composites is extremely effective at the maximum water intake ratio in hybridcomposite samples. It has been determined that the increase in the L $w^{-1}$ ratio of the samples causes more waterabsorption in both temperatures and water types.

🔖

Bu Makaleye Atıf Yap

ERKLİĞ, A., OĞUZ, Z. A. (2022). Hidrotermal Olarak Yaşlandırılmış Hibrit Aramid/Cam/Epoksi Kompozitlerin Su EmmeDavranışlarının İncelenmesi. Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 11 - Sayı: 3, 2255–2267. https://ajindex.com/articles/538476

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (9)

  1. Abanilla MA, Li Y, Karbhari VM, 2005. Durability characterization of wet layup graphite/epoxy composites used in external strengthening, Composites Part B: Engineering, 37(2-3): 200-212. Abd El-baky MA, 2018. Experimental investigation on impact performance of glass-polypropylene hybrid composites: Effect of water aging, Journal of Thermoplastic Composite Materials, 1-16.
  2. Abd El-baky MA, Attia MA, 2018. Water absorption effect on the in-plane shear properties of juteglass-carbon-reinforced composites using losipescu test, Journal of Composite Materials. Aquino EMF, Sarmento LPS, Oliveira W, Silva RV, 2007. Moisture effect on degradation of jute/glass hybrid composites, Journal of Reinforced Plastics and Composites, 26(2): 219-223. ASTM D5229 Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials. Atas C, Dogan A, 2015. An experimental investigation on the repeated impact response of glass/epoxy composites subjected to thermal ageing, Composites Part B, 75: 127-134.
  3. Bal S, Saha S, 2015. Effect of sea and distilled water conditioning on the overall mechanical properties of carbon nanotube/epoxy composites, International Journal of Damage Mechanics, 26(5): 758- 770. Bian L, Xiao J, Zeng J, Xing S, 2012. Effects of seawater immersion on water absorption and mechanical properties of GFRP composites. Journal of Composite Materials, 46(25): 3151–3162.
  4. Boukhoulda FB, Guillaumat L, Lataillade JL, Adda-Bedia E, Lousdad A, 2011. Aging-impact coupling based analysis upon glass/polyester composite material in hygrothermal environment, Materials and Design, 32: 4080–4087.
  5. Chu W, Wu L, Karbhari VM, 2004. Durability evaluation of moderate temperature cured E-glass/vinyl ester systems, Composite Structures, 66: 367-376.
  6. Collings TA, Copley SM, 1983.
  7. On the accelerated ageing of CFRP, Composites, 14(3): 180–188.
  8. Doğan NF, Bulut M, Erkliğ A, Bozkurt ÖY, 2019. Mechanical and low velocity impact characterization of carbon/glass hybrid composites with graphene nanoplatelets. Materials Research Express. Durgun İ, Vatansever O, Ertan R, Yavuz N, 2014. Otomotiv Sektöründe Kullanılan Kompozit Parça İmalat Yöntemlerinin Deneysel Olarak Karşılaştırılması, Mühendis ve Makina, 55(649): 58-63.
  9. Erkliğ A, Doğan NF, 2020. Nanographene inclusion effect on the mechanical and low velocity impact response of glass/basalt reinforced epoxy hybrid nanocomposites, Journal of the Brazilian Society of Mechanical Sciences and Engine