Dergiler / Antropoloji / 2026 / Sayı: 46 Özel Sayı

Bilgisayarlı tomografi görüntülerinden elde edilen femur ölçümlerinin doğruluk ve güvenilirliğinin değerlendirilmesi

Evaluation of the reliability and accuracy of femur measurements acquired from computed tomography images

Sayfa
90–101
Yayın Tarihi
2023-10-29
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Sonuçlar hem kuru femur kemiği hem de 3B sanal femur modellerinin bu çalışmada kullanılan 12 metrik ölçüm için birbirlerinin yerine kullanılabileceğini ve aynı zamanda bu ölçümler için farklı tarama parametrelerinin veya yumuşak doku etkisinin istatistiksel olarak anlamlı bir fark yaratmadığını göstermektedir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Biyolojik profil, biyolojik kimliğin tespitinde kritik bir rol oynadığı için adli değerlendirmelerde önemli bir konuma sahiptir.
📊
Temel Bulgular & Veri:Bu çalışmanın temel amacı, BT ile oluşturulan 3B femur modellerinden elde edilen metrik ölçümlerin doğruluğunu değerlendirmektir.
💡
Sonuç & Katkı:Sonuçlar hem kuru femur kemiği hem de 3B sanal femur modellerinin bu çalışmada kullanılan 12 metrik ölçüm için birbirlerinin yerine kullanılabileceğini ve aynı zamanda bu ölçümler için farklı tarama parametrelerinin veya yumuşak doku etkisinin istatistiksel olarak anlamlı bir fark yaratmadığını göstermektedir.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:3B görüntüleme · BT parametreleri · metrik ölçüm

Özet

Biyolojik profil, biyolojik kimliğin tespitinde kritik bir rol oynadığı için adli değerlendirmelerde önemli bir konuma sahiptir. Mevcut güncel iskelet materyallerinin sınırlı olması nedeniyle, bilimsel araştırmalar çağdaş popülasyonları incelemeye yönelmiştir. Özellikle bilgisayarlı tomografi alanındaki son gelişmeler sayesinde, tıbbi arşivlerde bulunan BT taramalarından detaylı anatomik veriler doğru bir şekilde elde edilebilmektedir. Bu araştırmaların zamanla artan kullanımıyla birlikte, bu tekniklerle geliştirilen yeni yöntemlerin uygulanabilirliğini analiz etmek önemlidir. Bu çalışmanın temel amacı, BT ile oluşturulan 3B femur modellerinden elde edilen metrik ölçümlerin doğruluğunu değerlendirmektir. Bu doğruluk değerlendirmesi için 3 farklı çalışma yapılmıştır. Bu çalışmaların ilki, BT görüntülerinden elde edilen ölçümleri referans olarak kullanılan kuru femur örneklerinden elde edilen ölçümlerle karşılaştırmayı amaçlamaktadır. Ayrıca çalışma, BT parametrelerinin ve yumuşak dokunun femurların üç boyutlu BT görüntülerinden elde edilen 12 ölçümün doğruluğu üzerindeki etkisini incelemeyi hedeflemiştir. Analiz ve ölçüm için on beş femurdan oluşan bir veri seti kullanılmıştır. Elde edilen görüntüler daha sonra kuru femurlardan elde edilen 12 ölçümle karşılaştırılarak her iki ölçüm protokolünün güvenilirliği ve doğruluğu değerlendirilmiştir. CT parametlerinin ve yumuşak dokunun etkisini araştırmak için ise 4 femur kullanılmıştır. OsiriX yazılımı kullanılarak işlenen femur görüntülerinden elde edilen on iki ölçüm, Excel yazılım paketi ve SPSS 24.0 kullanılarak analiz edilmiştir. Bu çalışmanın sonuçlarına göre, BT ile görüntü alımının güvenilirliği açısından belirgin bir standart olmadığı gözlemlenebilir. Sonuçlar hem kuru femur kemiği hem de 3B sanal femur modellerinin bu çalışmada kullanılan 12 metrik ölçüm için birbirlerinin yerine kullanılabileceğini ve aynı zamanda bu ölçümler için farklı tarama parametrelerinin veya yumuşak doku etkisinin istatistiksel olarak anlamlı bir fark yaratmadığını göstermektedir.

Abstract

The biological profile holds notable significance within forensic assessments, as it plays a crucial role in determining biological identity. Moreover, it possesses substantial potential for applications in fields such as medical legal cases and forensic anthropology. Recent advancements in technology, specifically in the field of computed tomography, have enabled the accurate acquisition of detailed anatomical data from CT scans present in extensive medical repositories. The validity of new methods developed through the application of these techniques should therefore be analyzed. The primary intent of this research was to investigate the measurement accuracy obtained from CT-generated 3D femur models. To investigate the accuracy and reliability of measurements obtained from CT-generated 3D femur models, 3 different studies were conducted. A dataset comprising fifteen femurs was employed for analysis and measurement purposes. The obtained images were subsequently compared to twelve measurements acquired from the dry femora, enabling an assessment of the reliability and accuracy of both measurement protocols. To investigate the effect of CT parameters and soft tissue, 4 femurs were used. The analysis of twelve femur measurements obtained from the CT images processed with OsiriX software was carried out using Excel software packages and SPSS 24.0. From the results of this study, it can be observed that there is no discernible pattern regarding the reliability of image acquisition in any particular way. This implies that both dry femur bone and 3D virtual femur models can be used interchangeably for the 12 metric measurements used in this study, and at the same time, different scanning parameters or soft tissue influence for these measurements do not make a statistically significant difference.

🔖

Bu Makaleye Atıf Yap

Gülhan, Ö. (2023). Bilgisayarlı tomografi görüntülerinden elde edilen femur ölçümlerinin doğruluk ve güvenilirliğinin değerlendirilmesi. Antropoloji, Sayı: 46 Özel Sayı, 90–101. https://doi.org/10.33613/antropolojidergisi.1335356

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (37)

  1. Christiansen, E. L., Thompson, J. R., & Kopp, S. (1986). Intra-and inter-observer variability and accuracy in the determination of linear and angular measurements in computed tomography: An in vitro and in situ study of human mandibles. Acta Odontologica, 44(4), 221-229. https://doi.org/10.3109/00016358608997724
  2. Conlogue, G., & Wade, A. D. (2011). Development of a dry bone MDCT scanning protocol for archaeological crania. Anthropology Presentations, 4. https://ir.lib.uwo.ca/anthropres/4
  3. Damstra, J., Fourie, Z., Slater, J. J. R. H., & Ren, Y. (2010). Accuracy of linear measurements from cone-beam computed tomography-derived surface models of different voxel sizes. American Journal of Orthodontics and Dentofacial Orthopedics, 137(1), 16.e1-16.e6. https://doi.org/10.1016/j.ajodo.2009.06.016
  4. Dedouit, F., Telmon, N., Costagliola, R., Otal, P., Joffre, F., & Rougé, D. (2007). Virtual anthropology and forensic identification: report of one case. Forensic Science International, 173(2), 182-187. https://doi.org/10.1016/j.forsciint.2007.01.002
  5. Dedouit, F., Telmon, N., Hervé, R., Francis, E., Joffre, C., & and Daniel, R. (2010). Modern cross-sectional ımaging in anthropology. In M. J. Thali, M. D. Viner & B. G. Brogdon, Brogdon’s forensic radiology (Second Ed.), (pp. 107-126). CRC Press. https://doi.org/10.4324/9780367805708
  6. Dirkmaat, D. (Ed.) (2014). A Companion to forensic anthropology. John Wiley & Sons. https://doi.org/10.1002/9781118255377
  7. Gaia, B. F., Sales, M. A. O. de, Perrella, A., Fenyo-Pereira, M., & Cavalcanti, M. G. P. (2011). Comparison between cone-beam and multislice computed tomography for identification of simulated bone lesions. Brazilian Oral Research, 25(4), 362-368. https://doi.org/10.1590/S1806-83242011000400014
  8. Giurazza, F., Del Vescovo, R., Schena, E., Cazzato, R. L., D’Agostino, F., Grasso, R. F., … Zobel, B. B. (2013). Stature estimation from scapular measurements by CT scan evaluation in an Italian population. Legal Medicine, 15(4), 202-208. https://doi.org/10.1016/j.legalmed.2013.01.002
  9. Goo, J. M., Tongdee, T., Tongdee, R., Yeo, K., Hildebolt, C. F., & Bae, K. T. (2005). Volumetric measurement of synthetic lung nodules with multi–detector row CT: Effect of various ımage reconstruction parameters and segmentation thresholds on measurement accuracy 1. Radiology, 235(3), 850-856. https://doi.org/10.1148/radiol.2353040737
  10. Grabherr, S., Cooper, C., Ulrich-Bochsler, S., Uldin, T., Ross, S., Oesterhelweg, L., … Mangin, P. (2009). Estimation of sex and age of “virtual skeletons”–a feasibility study. European Radiology, 19(2), 419-429. https://doi.org/10.1007/s00330-008-1155-y
  11. Haglund, W. D., & Sorg, M. H. (Eds.) (2010). Advances in forensic taphonomy: Method, theory, and archaeological perspectives. CRC Press. https://doi.org/10.1201/9781420058352
  12. Hildebolt, C. F., Vannier, M. W., & Knapp, R. H. (1990). Validation study of skull three-dimensional computerized tomography measurements. American Journal of Physical Anthropology, 82(3), 283-294. https://doi.org/10.1002/ajpa.1330820307
  13. Høyer, C. B., Nielsen, T. S., Nagel, L. L., Uhrenholt, L., & Boel, L. W. T. (2012). Investigation of a fatal airplane crash: autopsy, computed tomography, and injury pattern analysis used to determine who was steering the plane at the time of the accident. A case report. Forensic Science, Medicine, and Pathology, 8(2), 179-188. https://doi.org/10.1007/s12024-011-9239-4
  14. İşcan, M. (2005). Forensic anthropology of sex and body size. Forensic Science International, 147(2–3), 107-112. https://doi.org/10.1016/j.forsciint.2004.09.069
  15. Joo, I., Kim, S. H., Lee, J. Y., Lee, J. M., Han, J. K., & Choi, B. I. (2011). Comparison of semiautomated and manual measurements for simulated hypo-and hyper-attenuating hepatic tumors on MDCT: Effect of slice thickness and reconstruction increment on their accuracy. Academic Radiology, 18(5), 626-633. https://doi.org/10.1016/j.acra.2010.12.013
  16. Kranioti, E. F., Bastir, M., Sanchez-Meseguer, A., & Rosas, A. (2009). A geometric-morphometric study of the Cretan humerus for sex identification. Forensic Science International, 189(1), 111.e1-111.e8. https://doi.org/10.1016/j.forsciint.2009.04.013
  17. Kullmer, O. (2008). Benefits and risks in virtual anthropology. Journal of Anthropological Sciences, 86, 205-207. https://www.isita-org.com/jass/contents/2008%20vol86/16_Kullmer.pdf
  18. Lopes, P. M. L., Moreira, C. R., Perrella, A., Antunes, J. L., & Cavalcanti, M. G. P. (2008). 3-D volume rendering maxillofacial analysis of angular measurements by multislice CT. Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology, 105(2), 224-230. https://doi.org/10.1016/j.tripleo.2007.08.036
  19. Matteson, S. R., Bechtold, W., Phillips, C., & Staab, E. V. (1989). A method for three-dimensional image reformation for quantitative cephalometric analysis. Journal of Oral and Maxillofacial Surgery, 47(10), 1053-1061. https://doi.org/10.1016/0278-2391(89)90180-8
  20. O’Donnell, C., Iino, M., Mansharan, K., Leditscke, J., & Woodford, N. (2011). Contribution of postmortem multidetector CT scanning to identification of the deceased in a mass disaster: experience gained from the 2009 Victorian bushfires. Forensic Science International, 205(1), 15-28. https://doi.org/10.1016/j.forsciint.2010.05.026
  21. Oka, K., Murase, T., Moritomo, H., Goto, A., Sugamoto, K., & Yoshikawa, H. (2009). Accuracy analysis of three-dimensional bone surface models of the forearm constructed from multidetector computed tomography data. The International Journal of Medical Robotics and Computer Assisted Surgery, 5(4), 452-457. https://doi.org/10.1002/rcs.277
  22. Periago, D. R., Scarfe, W. C., Moshiri, M., Scheetz, J. P., Silveira, A. M., & Farman, A. G. (2008). Linear accuracy and reliability of cone beam CT derived 3-dimensional images constructed using an orthodontic volumetric rendering program. The Angle Orthodontist, 78(3), 387-395. https://doi.org/10.2319/122106-52.1
  23. Plattner, T., Thali, M. J., Yen, K., Sonnenschein, M., Stoupis, C., Vock, P., … Dirnhofer, R. (2003). Virtopsy-postmortem multislice computed tomography (MSCT) and magnetic resonance imaging (MRI) in a fatal scuba diving incident. Journal of Forensic Sciences, 48(6), 1347-1355. https://doi.org/10.1520/JFS2003162
  24. Ramsthaler, F., Kettner, M., Gehl, A., & Verhoff, M. A. (2010). Digital forensic osteology: Morphological sexing of skeletal remains using volume-rendered cranial CT scans. Forensic Science International, 195(1–3), 148-152. https://doi.org/10.1016/j.forsciint.2009.12.010
  25. Rawal, B., Ribeiro, R., Malhotra, R., & Bhatnagar, N. (2012). Anthropometric measurements to design best-fit femoral stem for the Indian population. Indian Journal of Orthopaedics, 46(1), 46-53. https://doi.org/10.4103/0019-5413.91634
  26. Riepert, T., Rittner, C., Ulmcke, D., Ogbuihi, S., & Schweden, F. (1995). Identification of an unknown corpse by means of computed tomography (CT) of the lumbar spine. Journal of Forensic Sciences, 40(1), 126-127. https://doi.org/10.1520/JFS13775J
  27. Robinson, C., Eisma, R., Morgan, B., Jeffery, A., Graham, E. A. M., Black, S., & Rutty, G. N. (2008). Anthropological measurement of lower limb and foot bones using Multi-Detector Computed Tomography. Journal of Forensic Sciences, 53(6), 1289-1295. https://doi.org/10.1111/j.1556-4029.2008.00875.x
  28. Spradley, M. K., & Jantz, R. L. (2011). Sex estimation in forensic anthropology: skull versus postcranial elements. Journal of Forensic Sciences, 56(2), 289-296. https://doi.org/10.1111/j.1556-4029.2010.01635.x
  29. Srivastava, R., Saini, V., Rai, R. K., Pandey, S., & Tripathi, S. K. (2012). A study of sexual dimorphism in the femur among North Indians. Journal of Forensic Sciences, 57(1), 19-23. https://doi.org/10.1111/j.1556-4029.2011.01885.x
  30. Stull, K. E., Tise, M. L., Ali, Z., & Fowler, D. R. (2014). Accuracy and reliability of measurements obtained from computed tomography 3D volume rendered images. Forensic Science International, 238, 133-140. https://doi.org/http://dx.doi.org/10.1016/j.forsciint.2014.03.005
  31. Thali, M. J., Yen, K., Schweitzer, W., Vock, P., Ozdoba, C., & Dirnhofer, R. (2003). Into the decomposed body—forensic digital autopsy using multislice-computed tomography. Forensic Science International, 134(2), 109-114. https://doi.org/10.1016/S0379-0738(03)00137-3
  32. Uslu, M., Ozsar, B., Kendi, T., Kara, S., Tekdemir, I., & Atik, S. (2005). The use of computed tomography to determine femoral component size. Bulletin (Hospital for Joint Diseases (New York, N.Y.)), 63(1-2), 49-53.
  33. Vandenbussche, E., Saffarini, M., Hansen, U., Taillieu, F., Mutschler, C., Augereau, B., & Gregory, T. M. (2010). Measurement of femoral head penetration in polyethylene using a 3-dimensional CT-scan technique. Acta Orthopaedica, 81(5), 563-569. https://doi.org/10.3109/17453674.2010.519163
  34. Verhoff, M. A., Ramsthaler, F., Krähahn, J., Deml, U., Gille, R. J., Grabherr, S., … Kreutz, K. (2008). Digital forensic osteology—possibilities in cooperation with the Virtopsy® project. Forensic Science International, 174(2), 152-156. https://doi.org/10.1016/j.forsciint.2007.03.017
  35. Waarsing, J. H., Day, J. S., & Weinans, H. (2004). An ımproved segmentation method for in vivo μCT imaging. Journal of Bone and Mineral Research, 19(10), 1640-1650. https://doi.org/10.1359/JBMR.040705
  36. Waitzman, A. A., Posnick, J. C., Armstrong, D. C., & Pron, G. E. (1992). Craniofacial skeletal measurements based on computed tomography: Part I. Accuracy and reproducibility. The Cleft Palate-Craniofacial Journal, 29(2), 112-117. https://doi.org/10.1597/1545-1569_1992_029_0112_csmboc_2.3.co_2
  37. Whyms, Brian J, Vorperian, H. K., Gentry, L. R., Schimek, E. M., Bersu, E. T., & Chung, M. K. (2013). The effect of computed tomographic scanner parameters and 3-dimensional volume rendering techniques on the accuracy of linear, angular, and volumetric measurements of the mandible. Oral Surgery, Oral Medicine, Oral Pathology and Oral Radiology, 115(5), 682-691. https://doi.org/10.1016/j.oooo.2013.02.008