Journals / Mühendis ve Makina / 2023 / Cilt: 64 - Sayı: 710

Investigation of the Efficacy of a New Envelope Protection System on Different Wind Turbines

Yenilikçi Uyarlanabilir Bir Zarf Koruma Sisteminin Farklı Rüzgar Türbinleri Üzerindeki Etkinliğinin İncelenmesi

Pages
153–174
Publication Date
2023-04-04
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Simulation results demonstrate that the protection system is highly effective in adaptation to various turbines and through changing the blade pitch angles, collectively, it protects them by operating within pre-defined thrust limits.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This paper briefly defines an adaptive envelope protection system, which is developed to protect the commonly used horizontal axis wind turbines in wind farms from excessive loads.
📊
Key Findings & Data:The system, which can adapt to turbines and their operations, follows up wind and turbine variables.
💡
Conclusion & Impact:Simulation results demonstrate that the protection system is highly effective in adaptation to various turbines and through changing the blade pitch angles, collectively, it protects them by operating within pre-defined thrust limits.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Uyarlanabilir zarf koruma sistemi · farklı kanat sayılı ve rotor çaplı rüzgar türbinleri · simülasyon testleri

Abstract

This paper briefly defines an adaptive envelope protection system, which is developed to protect the commonly used horizontal axis wind turbines in wind farms from excessive loads. The system, which can adapt to turbines and their operations, follows up wind and turbine variables. Thus, in advance, it detects the cases of excessive loads, and only when required, it interacts with the turbine blade pitch control system for turbine protection. The system is designed such that it protects turbines from high thrust forces. Here, the efficacy of the system is investigated through simulations on different horizontal axis turbines, referred to as Turbine A, Turbine B, and Turbine C with different number of blades and rotor diameters. Simulation results demonstrate that the protection system is highly effective in adaptation to various turbines and through changing the blade pitch angles, collectively, it protects them by operating within pre-defined thrust limits.

Özet

Bu çalışmada, rüzgar elektrik santrallerinde yaygın olarak kullanılan yatay eksenli rüzgar türbinlerini aşırı yüklenmelerden korumak için geliştirilen yenilikçi uyarlanabilir bir zarf koruma sistemi kısaca açıklanmıştır. Türbinlere ve türbin çalışmasındaki değişikliklere uyarlanabilen yenilikçi sistem, rüzgar ve türbine ait durum değişkenlerini gerçek zamanlı olarak izlemektedir. Bu sayede, türbinin tehlikeli çalışması durumunu önceden sezmekte ve sadece gerektiğinde türbini korumak için türbin kanat yunuslama açısı kontrol sistemine müdahele etmektedir. Sistem tasarımı, rüzgar türbinlerini aşırı itki kuvvetinden koruyacak şekilde gerçekleştirilmiş olup bu çalışmada farklı kanat sayıları ve rotor çaplarındaki Türbin A, Türbin B ve Türbin C olarak adlandırılan rüzgar türbinleri üzerindeki etkinliği simülasyonlar ile incelenmiştir. Simülasyon sonuçları, yeni zarf koruma sisteminin değişik rüzgar türbinlerine uyarlanabildiği ve türbin kanatlarının yunuslama açılarını topluca değiştirerek türbinleri önceden belirlenen itki kuvveti sınır değerleri içinde çalıştırarak koruyabileceğini göstermiştir.

🔖

Cite This Article

ŞAHİN, M., YAVRUCUK, İ. (2023). Investigation of the Efficacy of a New Envelope Protection System on Different Wind Turbines. Mühendis ve Makina, Cilt: 64 - Sayı: 710, 153–174. https://ajindex.com/articles/887964

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (7)

  1. Al-Ahmar, E., Benbouzid, M. E. H., Amirat, Y. & Ben Elghali, S. E. (2008). DFIG-based wind turbine fault diagnosis using a specific discrete wavelet transform. 18th International Conference on Electrical Machines, ICEM’08, Vilamoura, Portekiz. Bernhammer, Lars. O., Van Kuik, Gijs A. M. & De Breuker, R. (2016). Fatigue and extreme load reduction of wind turbine components using smart rotors. Journal of Wind Engineering and Industrial Aerodynmics, 154, 84–95. Doi: https://doi.org/10.1016/j.jweia.2016.04.001
  2. Bossanyi, E. A. (2003). Individual blade pitch control for load reduction. Wind Energy, 6(2), 119–128. Doi: https://doi.org/10.1002/we.76
  3. Camblong, H., Nourdine, S., Vechiu, İ. & Tapia, G. (2012). Control of wind turbines for fatigue loads reduction and contribution to the grid primary frequency regulation. Energy, 48(1), 284–291. Doi: https://doi.org/10.1016/j.energy.2012.05.035
  4. Cetrini, A., Cianetti, F., Corradini, M. L., Ippoliti, G. & Orlando, G. (2019). On-line fatigue alleviation for wind turbines by a robust control approach. International Journal of Electrical and Power & Energy Systems, 109, 384–394. Doi: https://doi.org/10.1016/j.ijepes.2019.02.011 Fischer B. & Shan, M. (2013). A survey on control methods for the mitigation of tower loads. Fraunhofer-Institute for Wind Energy and Energy Systems Technology, IWES, Proje Raporu 01/104256. Erişim adresi: https://publica-rest.fraunhofer.de/server/api/core/bitstreams/f0c70706-6842-454d-a14f-4fa050f7787a/content
  5. Gupta, A., Rotea, M. A., Chetan, M., Sakib, M. S. & Griffith, D. T. (2021). A methodology for robust load reduction in wind turbine blades using flow control devices. Energies, Cilt: 14 (12), 1-29. Doi: https://doi.org/10.3390/en14123500
  6. Jelavic, M., Petrovic, V., Barisic, M. & Ivanovic, I. (2013). Wind turbine control beyond the cut-out wind speed. European Wind Energy Conference and Exhibition, Bec/Viyana, Avusturya. Johnson, K. E., Pao, L. Y., Balas, M. J. & Fingersh, L. J. (2006). Control of variable speed wind turbines-standard and adaptive techniques for maximizing energy capture. IEEE Control Systems Magazine, 26(3), 70–81. Doi: 10.1109/MCS.2006.1636311 Jonkman, J., Butterfield, S., Musial, W. & Scott, G. (2009). Definition of a 5-MW reference wind turbine for offshore system development. NREL/TP-500-38060, National Renewable Energy Laboratory. Erişim adresi: https://www.nrel.gov/docs/fy09osti/38060.pdf
  7. Merabet, A., Thongam, J. & Gu, J. (2011). Torque and pitch angle control for variable