Journals / International Journal of Earth Sciences Knowledge and Applications / 2021 / Cilt: 3 - Sayı: 3

Drilling Engineering Assessment and Cost Analysis of Oil and Gas Wells Drilled in Onshore of Turkey

Pages
235–243
Publication Date
2021-07-15
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The well locations, their average well depths, drilling operation results, drilling times and costs, log and perforation operation costs, Drill Stem Test (DST) operation costs, acidizing operation costs, workover operation costs, cement costs, drill-bit types according to commonly used International Association of Drilling Contractors (IADC) codes for drilled formations, total costs and costs per meter for the oilwells have been evaluated.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Since the advanced technology used in oilwell drilling is difficult and costly, the drilling must be completed in the most appropriate conditions, in the shortest time, with cost-effective and the targeted depths and purposes.
📊
Key Findings & Data:This requirement has further increased the importance of drilling optimization.
💡
Conclusion & Impact:The well locations, their average well depths, drilling operation results, drilling times and costs, log and perforation operation costs, Drill Stem Test (DST) operation costs, acidizing operation costs, workover operation costs, cement costs, drill-bit types according to commonly used International Association of Drilling Contractors (IADC) codes for drilled formations, total costs and costs per meter for the oilwells have been evaluated.
🔬Design:Modeling & Simulation
📍Scope:2021 Verileri
⚙️Variables:Oilwell drilling · Drilling cost · Oilwell cost

Abstract

Since the advanced technology used in oilwell drilling is difficult and costly, the drilling must be completed in the most appropriate conditions, in the shortest time, with cost-effective and the targeted depths and purposes. This requirement has further increased the importance of drilling optimization. There are many literature studies on this subject. In this study, the data of oil and gas wells drilled in onshore Turkey were evaluated by investigating the studies on drilling optimization. It is aimed to create a new source for the literature by statistical analysis. For this purpose, the reports of 470 oil and gas wells drilled in 1963 - 2021 in onshore Turkey have been analyzed. The well locations, their average well depths, drilling operation results, drilling times and costs, log and perforation operation costs, Drill Stem Test (DST) operation costs, acidizing operation costs, workover operation costs, cement costs, drill-bit types according to commonly used International Association of Drilling Contractors (IADC) codes for drilled formations, total costs and costs per meter for the oilwells have been evaluated.

🔖

Cite This Article

OZDEMIR, A., GULLU, A., YASAR, E., PALABIYIK, Y. (2021). Drilling Engineering Assessment and Cost Analysis of Oil and Gas Wells Drilled in Onshore of Turkey. International Journal of Earth Sciences Knowledge and Applications, Cilt: 3 - Sayı: 3, 235–243. https://ajindex.com/articles/766054

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (3)

  1. Akman, H., 1990. A new approach for selection of optimum casing setting depths. 8th Petroleum Congress of Turkey. April 18-20,
  2. Ankara, Turkey, 37-50 (in Turkish with English). Görgün, S., 2013. Efficiency and productivity analysis of the wells opened between 2008-2010 by Turkish Petroleum Corporation (MSc. Thesis). Gazi University (in Turkish). Gümüş, Ö., Altan, Y., 1995. History of Petroleum and Oilwells Drilled in Turkey. General Directorate of Petroleum Affairs of Turkey. 178 p. (Turkish - English). Ozdemir, A., 2016. Discoverable Oil and Gas Deposits of Turkey (History, Political and Strategic Adventure of Petroleum in Turkey). Volume 1 (in Turkish). It can be available at: https://www.researchgate.net/publication/328635001_Turkiye'nin_Kesfedilebilir_Petrol_ve_Dogalgaz_Yataklari-I_Turkiye'de_Petrolun_Tarihi_Siyasi_ve_Stratejik_Seruveni
  3. Toka, B., 2011. Well design in deep geothermal drilling and drill string selection for drill rigs. MTA Bulletin of Natural Resources and Economics 12, 40-54 (in Turkish).