Journals / International Journal of Earth Sciences Knowledge and Applications / 2022 / Cilt: 4 - Sayı: 1

Relationship Between Rates of Penetration and Costs per Meter of Tricone Rock Bits: Cases from Southeastern Anatolia and Thrace Basins (Turkey)

Pages
79–99
Publication Date
2021-11-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Thus, in future oilwell drilling operations, a new attempt has been made to select the appropriate tricone rock bits and to penetrate in optimum conditions.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Oilwell drilling, which is a very expensive operation, requires advanced technical knowledge and technology.
📊
Key Findings & Data:Choosing the most suitable drill bits for the formation conditions to be drilled, which is the most important factor in the drilling cost and the rapid completion of the well, is one of the research subjects in which a large number and detailed studies have been carried out in the last 20 years.
💡
Conclusion & Impact:Thus, in future oilwell drilling operations, a new attempt has been made to select the appropriate tricone rock bits and to penetrate in optimum conditions.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Tricone rock bit · Roller cone bit · Rate of penetration

Abstract

Oilwell drilling, which is a very expensive operation, requires advanced technical knowledge and technology. Choosing the most suitable drill bits for the formation conditions to be drilled, which is the most important factor in the drilling cost and the rapid completion of the well, is one of the research subjects in which a large number and detailed studies have been carried out in the last 20 years. The orientations on the subject are towards increasing the "penetration rate of drill bit" on which the drilling economy depends substantially. In addition to the mechanical properties of the rocks and the formation properties including geological conditions, the characteristics of the drill bit such as drill bit types, features, and operating parameters also affect the drilling process of a well. This study aims to examine the types, penetration rates, and costs per meter of drill bits used according to formation types in oil and gas wells in the hydrocarbon production basins of Turkey. Besides, in the study, a new global chart is presented to be used for the selection of tricone rock bits suitable for the formation to be drilled, according to the International Association of Drilling Contractors codes. Thus, in future oilwell drilling operations, a new attempt has been made to select the appropriate tricone rock bits and to penetrate in optimum conditions.

🔖

Cite This Article

OZDEMİR, A., YAŞAR, E., PALABİYİK, Y., GÜLLÜ, A. (2021). Relationship Between Rates of Penetration and Costs per Meter of Tricone Rock Bits: Cases from Southeastern Anatolia and Thrace Basins (Turkey). International Journal of Earth Sciences Knowledge and Applications, Cilt: 4 - Sayı: 1, 79–99. https://ajindex.com/articles/766041

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (5)

  1. Alsharhan, A.S., Nairn, A.E.M., 2003. Sedimentary Basins and Petroleum Geology of the Middle East. Elsevier, 843 p. Barragan, R.V., Santos, L.A., 1997. Optimization of multiple bits runs. SPE/IADC Drilling Conference, SPE-37644-MS. Doi: 10.2118/37644-MS. B ourgoyne, Jr., A.T., Young Jr., F.S., 1974. A multiple regression approach to optimal drilling and abnormal pressure detection. Society of Petroleum Engineers Journal 14 (4), 371-384. Doi: 10.2118/4238-PA. Chenevert, M.E., Hollo, R., 1981. Practical calculator programs. Part 6. Program predicts drilling time, penetration rate. Oil and Gas Journal 79, 166-171.
  2. Derman, A.S., 2014. Petroleum Systems of Turkish Basins. in L. Marlow, C. Kendall, and L. Yose (eds)., Petroleum Systems of the Tethyan Region, AAPG Memoir 106, p. 469-504.
  3. Erdoğan, Y., Yıldız, M.İ., Kök, O.E., 2018. Correlating rate of penetration with the weight on bit, rotation per minute, flow rate and mud weight of rotary drilling. Natural and Engineering Sciences 3 (3), 378-385. Doi: 10.28978/nesciences.469298. Galle, E.M., Woods, H.B., 1963. Best constant weight and rotary speed for rotary rock bits. API Drilling and Production Practice, Paper No: API-63-048, 48-73.
  4. Hapnes, M., 2014. Drilling in Salt Formations and Rate of Penetration Modelling. Norwegian University of Science and Technology, Department of Petroleum Engineering and Applied Geophysics, 137 p. Hazbeh, O., Aghdam, S.K., Ghorbani, H., Mohamadian, N., Alvar, M.A., Moghadasi, J., 2021. Comparison of accuracy and computational performance between the machine learning algorithms for rate of penetration in directional drilling well. Petroleum Research 6 (3), 271-282. Doi: https://doi.org/10.1016/j.ptlrs.2021.02.004.
  5. Kor, K., Ertekin, S., Yamanlar, S., Altun, G., 2021. Penetration rate prediction in heterogeneous formations: A geomechanical approach through machine learning. Journal of Petroleum Science and Engineering 207, 109138. Doi: 10.1016/j.petrol.2021.109138. Kor, K., Altun, G., 2020a. ROP prediction with Bourgoyne and Young method: A statistical point of view. Proceedings of Turkey IV. Scientific and Technical Petroleum Congress, 18 - 20 November, Ankara, 16 p. Kor, K., Altun, G., 2020b. Is support Vector Regression method suitable for predicting rate of penetration? Journal of Petroleum Science and Engineering 194, 107542. Doi: 10.1016/j.petrol.2020.107542. Lummus, J.L., 1970. Drilling optimization. Journal of Petroleum Technology 22 (11), 1379-1388. Doi: 10.2118/2744-PA. Mech