SavedAdd your journal

Journals / International Journal of Chemistry and Technology / 2018 / Cilt: 2 - Sayı: 1

Application of Sepiolite-Poly(vinylimidazole) composite for the removal of Cu(II) from aqueous solution: Isotherm and thermodynamics studies

Ali Kara
Muhsin Kılıç
Nalan TEKİN
Nuray DİNİBÜTÜN
Akif ŞAFAKLI
Pages
20–33
Publication Date
2018-02-16
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Additionally, adsorption experiments showed that Sepiolite-Poly(vinylimidazole) composite can be used as an effective adsorbent for the removal of Cu(II) ions from aqueous solution.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:For removal of Cu(II) ions from aqueous solution, a novel composite was prepared from 1-vinyl imidazole and sepiolite by the technique of in-situ polymerization.
📊
Key Findings & Data:Adsorption of Cu(II) ions from aqueous solution onto Sepiolite-Poly(vinylimidazole) composite has been studied at 277, 298, 318, and 338 K and the experimental data were analyzed using fourteen isotherm models.
💡
Conclusion & Impact:Additionally, adsorption experiments showed that Sepiolite-Poly(vinylimidazole) composite can be used as an effective adsorbent for the removal of Cu(II) ions from aqueous solution.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Clay · composite · heavy metal

Abstract

For removal of Cu(II) ions from aqueous solution, a novel composite was prepared from 1-vinyl imidazole and sepiolite by the technique of in-situ polymerization. Adsorption of Cu(II) ions from aqueous solution onto Sepiolite-Poly(vinylimidazole) composite has been studied at 277, 298, 318, and 338 K and the experimental data were analyzed using fourteen isotherm models. The determination coefficients (R2) were determined for each isotherm analysis. The determination coefficients demonstrated that in general the accuracy of models to fit experimental data improves with the number of parameters. The Langmuir model provided the best fit to the experimental data among the two-parameter isotherms. The Toth model provided the best fit to the data among the three-parameter models. Adsorption isotherm modeling shows that the interaction of Cu(II) with Sepiolite-Poly(vinylimidazole) composite surface is localized to monolayer sorption and adsorption is an endothermic process. Additionally, adsorption experiments showed that Sepiolite-Poly(vinylimidazole) composite can be used as an effective adsorbent for the removal of Cu(II) ions from aqueous solution.

🔖

Cite This Article

Kara, A., Kılıç, M., TEKİN, N., DİNİBÜTÜN, N., ŞAFAKLI, A. (2018). Application of Sepiolite-Poly(vinylimidazole) composite for the removal of Cu(II) from aqueous solution: Isotherm and thermodynamics studies. International Journal of Chemistry and Technology, Cilt: 2 - Sayı: 1, 20–33. https://ajindex.com/articles/765716

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (27)

  1. Kizilkaya, B.; Tekinay, A. A.; Dilgin, Y. Desalination 2010, 264, 37–47
  2. Wu, X.-W.; Ma, H.-W.; Zhang, L.-T.; Wang, F.-J. Appl. Surf. Sci. 2012, 261, 902– 907
  3. Dalida, M.L.P.; Mariano, A.F.V.; Futalan, C.M.; Kan, C.-C.; Tsai, W.-C.; Wan, M.-W. Desaliation 2011, 275, 154–159
  4. Wan Ngah, W.S.; Teong, L.C.; Toh, R.H.; Hanafiah, M.A.K.M. Chem. Eng. J. 2012, 209, 46–53
  5. Liu, Y.; Chen, M.; Hao, Y. Chem. Eng. J. 2013, 218, 46–54
  6. Pellera, F.-M.; Giannis, A.; Kalderis, D.; Anastasiadou, K.; Stegmann, R.; Wang, J.-Y.; Gidarakos, E. J. Environ. Manag. 2012, 96, 35–42
  7. Chen, J.J.; Ahmad, A.L.; Ooi, B.S. J. Environ. Chem. Eng. 2013, 1, 339–348
  8. Karapinar, N.; Donat, R. Desalination 2009, 249, 123–129
  9. Wan Ngah, W.S.; Fatinathan, S. J. Environ. Manag. 2010, 91, 958–969
  10. Serencam, H.; Ozdes, D.; Duran, C.; Senturk, H.B. Desalin. Water Treat. 2014, 52, 3226–3236
  11. Ibrahim, H.S.; Ammar, N.S.; Ghafar, H.H.A.; Farahat, M. Desalin. Water Treat. 2012, 48, 320–328
  12. Nadaroglu, H.; Kalkan, E.; Demir, N. Desalination 2010, 251, 90–95
  13. Wan Ngah, W.S.; Teong, L.C.; Toh, R.H.; Hanafiah, M.A.K.M. Chem. Eng. J. 2013, 223, 231–238
  14. Keshtkar, A.R.; Irani, M.; Moosavian, M.A. J. Taiwan Inst. Chem. Eng. 2013, 44, 279–286
  15. Hu, X.-J.; Liu, Y.-G.; Wang, H.; Chen, A.-W.: Zeng, G.-M.; Liu, S.-M.; Guo, Y.-M.; Hu, X.; Li, T.-T.; Wang, Y.-Q.; Zhou, L.; Liu, S.-H. Sep. Purif. Technol. 2013, 108, 189–195
  16. Anirudhan, T.S.; Suchithra, P.S. Chem. Eng. J. 2010, 156, 146–156
  17. Yu, Y.; Qi, S.; Zhan, J.; Wu, Z.; Yang, X.; Wu, D. Mater. Res. Bull. 2011, 46, 1593–1599
  18. Kavas, H.; Baykal, A.; Senel, M.; Kaynak, M. Mater. Res. Bull. 2013, 48, 3973–3980
  19. Tekin, N.; Kadıncı, E.; Demirbaş, Ö.; Alkan, M.; Kara, A. J. Colloid Interf. Sci. 2006, 296, 472–479
  20. Gurbuz, O.; Sahan, Y.; Kara, A.; Osman, B. Hacettepe J. Biol. Chem. 2009, 37, 353–357
  21. Caner, H.; Yilmaz, E.; Yilmaz, O. Carbohyd. Polym. 2007, 69, 318–325
  22. Bergaya, F.; Jaber, M.; Lambert, J. F.; Galimberti, M. Rubber-Clay Nanocomposites: Science, Technology, and Applications. (1. Clay and Clay Minerals). Wiley, 2011
  23. Fukushima, K.; Tabuani, D.; Camino, G. Mater. Sci. Eng. C. 2009, 29, 1433–1441
  24. Kara, A.; Demirbel, E.; Sözeri, H.; Küçük, İ.; Ovalıoğlu, H. Hacettepe J. Biol. Chem. 2014, 42, 299–312
  25. Ho, Y.S. Carbon 2004, 42, 2115–2116
  26. Kumar, K.V. J. Hazard. Mater. B. 2006,136, 197–202
  27. Tekin, N.; Kaya, A.U.; Esmer, K.; Kara, A. Appl. Clay Sci. 2012, 57, 32–38. 28.