Journals / Mühendis ve Makina / 2017 / Cilt: 58 - Sayı: 689

Importance of Material Selection in Design of Electric Vehicles

Elektrikli Araçların Tasarımında Malzeme Seçiminin Önemi

Pages
81–95
Publication Date
2017-10-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this study, lightweight materials and material selection process are investigated in order to lighten of EVs.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Electric vehicles (EVs) have been developed as an alternative to cars with fossil-fuel engine in consequence of that fossil fuels are incompetence due to increase in population.
📊
Key Findings & Data:It is aimed that Green House Gases after fossil-fuel consumption will be reduced by prevalence of electric vehicles.
💡
Conclusion & Impact:In this study, lightweight materials and material selection process are investigated in order to lighten of EVs.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Hafifletilmiş araçlar · otomotiv malzemeleri · alternatif malzemeler

Abstract

Electric vehicles (EVs) have been developed as an alternative to cars with fossil-fuel engine in consequence of that fossil fuels are incompetence due to increase in population. It is aimed that Green House Gases after fossil-fuel consumption will be reduced by prevalence of electric vehicles. Short ranges, long charging times and high cost are challenges that prevent wide spreading of EVs. Considerable part of costs result from battery expenditure, however, EVs need more batteries for more range. But more battery means shortening the range due to its weight. Lightweight materials are utilized to expand range of vehicle with less battery. Availability, environmental impact, strength and costs must be considered on design stage. In this study, lightweight materials and material selection process are investigated in order to lighten of EVs.

Özet

Elektrikli araçlar artan nüfusla birlikte ihtiyacı karşılamakta yetersiz kalan fosil yakıtların kullanıldığı motorlu araçlara alternatif olarak geliştirilmiştir. Elektrikli araçların yaygınlaşması ile fosil yakıtların kullanımı neticesinde oluşan emisyonların çevresel etkilerinin azaltılması amaçlanmaktadır. Menzilinin kısa olması, batarya dolum süresinin uzunluğu ve satış fiyatının yüksek olması elektrikli araçların yaygınlaşmasının önündeki engellerdir. Maliyeti büyük ölçüde bataryalardan kaynaklanan bu araçların menzili artırmak için daha fazla kapasiteye sahip batarya kullanmak gerekmektedir. Ancak ağır bir araç menzil sorunu oluşturmaktadır. Menzili artırmak için daha düşük yoğunluğa sahip alternatif malzemeler kullanarak araç hafifletilebilir. Böylece aynı batarya kapasitesi ile daha uzun yol kat edilebilmektedir. Araçların imalatında kullanılan bu malzemelerin seçiminde bulunabilirlik, çevresel etki, dayanım ve maliyet gibi unsurlar dikkate alınmalıdır. Bu çalışma kapsamında, elektrikli araçların hafifletilmesi amacı ile kullanılan malzemeler ve bu malzemelerin seçiminde dikkat edilmesi gereken hususlar irdelenmiştir.

🔖

Cite This Article

GÜVEN, F., RENDE, H. (2017). Importance of Material Selection in Design of Electric Vehicles. Mühendis ve Makina, Cilt: 58 - Sayı: 689, 81–95. https://ajindex.com/articles/693109

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Larminie, J., Lowry, J. 2003. Electric Vehicle Technology Explained, John Willey & Sons LTD, Oxford
  2. Chan, C. C. 2001. Modern Electric Vehicle Technology. Oxford University Press, New York
  3. Rouilloux, G., Znojek, B. 2012. “Plastics. The Future for Automakers and Chemical Companies,” https://www.atkearney.com/documents/10192/244963/Plastics The_Future_for_Automakers_and_Chemical_Companies.pdf, son erişim tarihi: 20.04.2016
  4. Watarai, H. 2006. “Trend of Research and Development for Magnesium Alloys-Reducing the Weight of Structural Materials in Motor Vehicles,” Science and Technology Trends, vol. 2
  5. Ashley, S. 2012. “Lightweight Sandwich Structures for EV Chassis,” http://articles.sae. org/11744/, son erişim tarihi: 20.04.2016
  6. Center for Automotive Research. 2011. Automotive Technology: Greener Products, Changing Skills-Lightweight Materials & Forming Report, U.S. Employment and Training Administration, http://www.drivingworkforcechange.org/reports/lightweightMaterials.pdf, son erişim tarihi: 21.04.2016
  7. Habertürk. 2015. “Elektrikli Otomobil Sayısı Artıyor,” http://www.haberturk.com/ekonomi/otomobil/haber/1150121-elektrikli-otomobil-sayisi-artiyor, son erişim tarihi: 26.03.2016
  8. Cobb, J. 2015. “One Million Global Plug-in Sales Milestone Reached,” http://www.hybridcars.com/one-million-global-plug-in-sales-milestone-reached/, son erişim tarihi: 23.03.2016
  9. Pasaoglu, G., Fiorello, D., Martino, A., Scarcella, G., Alemanno, A., Zubaryeva, A., Thiel, C. 2012. Report EUR 25627 EN: Driving and Parking Patterns of European Car Drivers - A Mobility Survey, Joint Research Centre of the European Commission, Netherlands, https://setis.ec.europa.eu/sites/default/files/reports/Driving_and_parking_patterns_of_European_car_drivers-a_mobility_survey.pdf, son erişim tarihi: 16.03.2016
  10. U.S. Department of Energy. Fuel Economy Guide, DOE/EE-1249, https://www.fueleconomy.gov/feg/pdfs/guides/FEG2016.pdf, son erişim tarihi: 30.04.2016
  11. Pagerit, S., Sharer, P., Rousseau, A. 2006. “Fuel Economy Sensitivity to Vehicle Mass for Advanced Vehicle Powertrains,” SAE Technical Paper 2006-01-0665, 2006,
  12. Ashley, S. 2010. “Shedding Pounds on a Magnesium Diet,” Automotive Engineering International, p. 34–36
  13. Wilhelm, M. 1993. “Materials used in Automobile Manufacture - Current State and Perspectives,” Journal de Physique IV Colloque, vol. 3, p. 31–40
  14. Ashley, S. 2013. “Lightweight Materials Compete for Automake