Journals / Journal of the Turkish Chemical Society Section B: Chemical Engineering / 2017 / Özel Sayı 1

Investigation of the Dissolution Behaviors in Different Solvents of the Zinc and Manganese Powders Obtained from the Spent Alkaline Batteries

Pages
61–68
Publication Date
2017-10-20
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was observed that the zinc powder was completely dissolved in the hydrochloric acid solutions in 20 minutes of reaction time.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, after the zinc and manganese powders were individually obtained from the spent alkaline batteries, their dissolution behaviors in different solvents were examined to determine the appropriate leaching reagent for each species.
📊
Key Findings & Data:In the dissolution experiments, the values of the concentration of relevant reagent, reaction temperature, solid to liquid ratio, stirring speed, and particle size were fixed at 1 mol/L, 40 °C, 0,5/500 g/mL, 500 rpm, and -40+50 mesh, respectively.
💡
Conclusion & Impact:It was observed that the zinc powder was completely dissolved in the hydrochloric acid solutions in 20 minutes of reaction time.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Dissolution · Spent Battery · Zinc

Abstract

In this study, after the zinc and manganese powders were individually obtained from the spent alkaline batteries, their dissolution behaviors in different solvents were examined to determine the appropriate leaching reagent for each species. The aqueous solutions of the sodium hydroxide, ammonia, ammonium chloride, ammonium acetate, acetic acid, sulfuric acid, and hydrochloric acid were used as the leaching reagents with the aim of dissolving the zinc and manganese powders. In the dissolution experiments, the values of the concentration of relevant reagent, reaction temperature, solid to liquid ratio, stirring speed, and particle size were fixed at 1 mol/L, 40 °C, 0,5/500 g/mL, 500 rpm, and -40+50 mesh, respectively. It was determined that the hydrochloric acid was more effective reagent for both powder samples. The dissolution extent of manganese powder in the hydrochloric acid solutions was found to be 41,5% after 120 minutes of reaction time. It was observed that the zinc powder was completely dissolved in the hydrochloric acid solutions in 20 minutes of reaction time.

🔖

Cite This Article

ÖZDEMİR, G. D. T., DEMİRKIRAN, N. (2017). Investigation of the Dissolution Behaviors in Different Solvents of the Zinc and Manganese Powders Obtained from the Spent Alkaline Batteries. Journal of the Turkish Chemical Society Section B: Chemical Engineering, Özel Sayı 1, 61–68. https://ajindex.com/articles/681852

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Jaapar J, Ahmad W.A. Recovery of valuable metals from dry cell batteries. International Conference on Environment 2006 (ICENV 2006). 13-15 November 2006; Penang, Malaysia
  2. De Souza C.C.B.M., De Oliveria D.C., Tenorio J.A.S, Characterization of used alkaline batteries powder and analysis of zinc recovery by acid leaching, J Power Sources, 2001; 103:120-126. DOI:10.1016/S0378-7753(01)00850-3
  3. Sayılgan E, Kukrer T, Yigit N.O., Civelekoglu G., Kitis M. Acidic leaching and precipitation of zinc and manganese from spent battery powder using various reductants, J Hazard Mater 2010; 173:137-143. DOI:10.1016/j.jhazmat.2009.08.063
  4. Gega J, Walkowiak W. Leaching of zinc and manganese from used up zinc-carbon batteries using aqueous sulfuric acid solution, Physicochem Probl Miner Process, 2011; 46:155-162. DOI:10.5277/ppmp120203
  5. Buzatu M, Saceanu S, Petrescu M.I., Ghica G.V., Buzatu T. Recovery of zinc and manganese from spent batteries by reductive leaching in acidic media, J Power Sources, 2014; 247:612-617. DOI:10.1016/j.jpowsour.2013.09.001
  6. El Hazek M.N., Lasheen T.A., Helal A.S. Reductive leaching of manganese from low grade sinai ore in HCl using H2O2 as reductant, Hydrometallurgy, 2006;84:187-191.DOI: 10.1016/j.hydromet.2006.05.006
  7. Shin S.M., Senanayake G, Sohn J, Kang J, Yang D, Kim T. Separation of zinc from spent zinc-carbon batteries by selective leaching with sodium hydroxide, Hydrometallurgy, 2009; 96:349-353. DOI:10.1016/j.hydromet.2008.12.010 8. Buzatu T, Popescu G, Birloaga I, Saceanu S. Study concerning the recovery of zinc and manganese from spent batteries by hydrometallurgical processes, Waste Manage, 2013; 33:699-705. DOI:10.1016/j.wasman.2012.10.005
  8. Senanayake G, Shin S.M., Senaputra A, Winn A, Pugaev D, Avraamides J, Sohn J.S., Kim D.J. Comparative leaching of spent zinc-manganese-carbon batteries using sülfür dioxide in ammoniacal and sulfuric acid solution, Hydrometallurgy, 2010; 105:36-41. DOI: 10.1016/j.hydromet.2010.07.004
  9. Demirkıran N. Examination of the use of ammonium acetate as lixivilant in recovery of Zn from waste batteries and kinetic analysis, Environ Eng Manag J, 2015; 14:51-56. http://www.eemj.icpm.tuiasi.ro