SavedAdd your journal

Journals / International Advanced Researches and Engineering Journal / 2018 / Cilt: 2 - Sayı: 1

A review on the effects of micro-nano particle size and volume fraction on microstructure and mechanical properties of metal matrix composites manufactured via mechanical alloying

Ege Anıl DİLER
Sinem AKTAŞ
Pages
68–74
Publication Date
2022-10-19
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The main aim of the present study is to explain the roles of volume fraction and size of reinforcement particle on the microstructural properties and how these parameters affect the mechanical properties of aluminum based metal matrix composites with micro and nano-sized reinforcement particles produced by mechanical alloying.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The major challenge for the production of the composites which are reinforced with nano and micro-sized particles is to obtain uniform distribution of reinforcement particles in microstructure.
📊
Key Findings & Data:This method has three steps: 1) mixing and/or alloying of powders, 2) pressing, and 3) sintering.
💡
Conclusion & Impact:The main aim of the present study is to explain the roles of volume fraction and size of reinforcement particle on the microstructural properties and how these parameters affect the mechanical properties of aluminum based metal matrix composites with micro and nano-sized reinforcement particles produced by mechanical alloying.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Mechanical alloying · Mechanical properties · Metal matrix composites

Abstract

The major challenge for the production of the composites which are reinforced with nano and micro-sized particles is to obtain uniform distribution of reinforcement particles in microstructure. Powder metallurgy method can be used in order to obtain a homogeneous distribution of reinforcement particles. This method has three steps: 1) mixing and/or alloying of powders, 2) pressing, and 3) sintering. Mechanical alloying is a complex process which involves optimization of many parameters such as milling time, process control agent, particle size, ball to powder weight ratio, milling speed, milling atmosphere, mill types, etc. The main aim of the present study is to explain the roles of volume fraction and size of reinforcement particle on the microstructural properties and how these parameters affect the mechanical properties of aluminum based metal matrix composites with micro and nano-sized reinforcement particles produced by mechanical alloying.

🔖

Cite This Article

DİLER, E. A., AKTAŞ, S. (2022). A review on the effects of micro-nano particle size and volume fraction on microstructure and mechanical properties of metal matrix composites manufactured via mechanical alloying. International Advanced Researches and Engineering Journal, Cilt: 2 - Sayı: 1, 68–74. https://ajindex.com/articles/539395

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Mazahary A., and M.O. Shabani, Mechanical properties of A356 matrix composites reinforced with nano SiC particles, Strength of Materials, 2012. 44(6): p. 146-155
  2. Amal E.N., and E.E. Nassar, Properties of Al matrix nano composites prepared by powder metallurgy processing, Journal of King Saud University- Engineering Science, 2017. 29(3): p. 295-299
  3. Dongshuai Z., F. Qiu, H. Wang, and Q. Jiang, Manufacture of nano-sized particle-reinforced metal matrix composites: A Review, Acta Metall. Sin.(Eng. Lett.), 2014. 27(5): p. 798-805
  4. Murthy N.V., A.P. Reddy, N. Selvaraj, and C.S.P. Rao, Aluminium metal matrix nano composites- manufacturing methods: A Review, International Journal of Mechanical Engineering, 2015, 4(4): p.24-44
  5. Sajjadi S.A, H.R. Ezatpour, and H. Beygi, Microstructure and mechanical properties of Al-Al2O3 micro and nano composites fabricated via stir casting, Materials Science and Engineering A, 2011. 528: p. 8765-8771
  6. Jose J.G., R. Catalin, G.V. Picu, M. Nithin, S. Thomas, A. Lopes, and C. Buchheim, Mechanical behaviour of Al-SiC nanocomposites produced by ball milling and spark plasma sintering, Metallurgical and Materials Transactions A, 2013. 44 A: p. 5259-5269 7. Endalkachew M., V.Y. Bazhin, and S. Savchenkow, Review on nano particle reinforced aluminum metal matrix composites, Research Journal of Applied Sciences, 2016. 11(5): 188-196
  7. Aizadeh A., M. Khademian, and A. Abdollahi, Investigation of fabrication method effects on microstructure and mechanical properties of Al-2wt %B4C nanocomposite, [cited 2017 29 August]; Avaliable from:
  8. Sherif M.E., Mechanical Alloying, Nanotechnology, Materials Science and Powder Metallurgy. 2015, Elsevier
  9. Prabhu B., C. Suryanarayana, L. Ana, and R. Vaidyanathan, Synthesis and characterization of high volume fraction Al-Al2O3 nanocomposite powders by high energy milling, Materials Science and Engineering A, 2006. 425: p.192-200
  10. Suryanarayana C., Mechanical milling and alloying, Progress In Materials Science, 2001. 46: p. 1-184
  11. Mahboob H., S.A. Sajjadi, and S.M. Zebarjad, Synthesis of Al-Al2O3 nanocomposites by mechanical alloying and evaluation of the effect of ball milling time on the microstructure and mechanical properties, in ICMM’08: Kuala Lumpur. p. 240-245
  12. Razavi Z.H., A. Simchi and S.M. Reihani, Structural evolution during mechanical milling of nanometric and micrometric Al2O3 reinforced