Journals / International Advanced Researches and Engineering Journal / 2021 / Cilt: 5 - Sayı: 2

A numerical study of the natural convection of Al2O3-EG nanofluid in a square enclosure and impacts and a comparison of various viscosity and thermal conductivity models

Pages
218–230
Publication Date
2022-10-19
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this study, many parameters affecting heat transfer by natural convection were investigated in the enclosure containing Al2O3-EG nanofluid, and it was found that nanofluid viscosity was the most efficient factor for heat transfer rate.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In the current study, heat transfer enhancement in an enclosure was investigated by utilizing Al2O3-EG nanofluid.
📊
Key Findings & Data:Calculations were made for the Rayleigh number (103-106) and the volume fraction of alumina nanoparticles, ϕ= 0-5%.
💡
Conclusion & Impact:In this study, many parameters affecting heat transfer by natural convection were investigated in the enclosure containing Al2O3-EG nanofluid, and it was found that nanofluid viscosity was the most efficient factor for heat transfer rate.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Al2O3 · Finite volume method · Fourth-order linear scheme

Abstract

In the current study, heat transfer enhancement in an enclosure was investigated by utilizing Al2O3-EG nanofluid. In the numerical solutions, the solid-liquid mixture equations were applied for the enclosure that composed alumina-ethylene glycol nanofluid, in terms of the two-dimensional buoyancy-driven convection. Various viscosity and thermal conductivity models were utilized for the purpose of assessing heat transfer improvement. The purpose of this study was to reveal the impacts caused by uncertainties in the viscosity and thermal conductivity of the nanofluid on laminar natural convection heat transfer occurring in a square enclosure. The temperatures of the right and left vertical walls of the enclosure were kept constant as Tc and Th, respectively, whereas the thermal insulation of the other walls was performed. The discretization of the governing equations was performed by utilizing the finite volume method and the SIMPLE algorithm. Calculations were made for the Rayleigh number (103-106) and the volume fraction of alumina nanoparticles, ϕ= 0-5%. In this study, many parameters affecting heat transfer by natural convection were investigated in the enclosure containing Al2O3-EG nanofluid, and it was found that nanofluid viscosity was the most efficient factor for heat transfer rate.

🔖

Cite This Article

ÇAKMAK, N. K., YAPICI, K., DURMAZUÇAR, H. H. (2022). A numerical study of the natural convection of Al2O3-EG nanofluid in a square enclosure and impacts and a comparison of various viscosity and thermal conductivity models. International Advanced Researches and Engineering Journal, Cilt: 5 - Sayı: 2, 218–230. https://ajindex.com/articles/539304

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Baïri, A., E. Zarco-Pernia, and J.-M.G. De María, A review on natural convection in enclosures for engineering applications. The particular case of the parallelogrammic diode cavity. Applied Thermal Engineering, 2014. 63(1): p. 304-322
  2. Tyagi, H., P. Phelan, and R. Prasher, Predicted efficiency of a low-temperature nanofluid-based direct absorption solar collector. Journal of solar energy engineering, 2009. 131(4)
  3. Mahian, O., et al., A review of the applications of nanofluids in solar energy. International Journal of Heat and Mass Transfer, 2013. 57(2): p. 582-594
  4. Tyagi, H., Radiative and combustion properties of nanoparticle-laden liquids. 2008: Arizona State University
  5. Çakmak, N.K., Experımental study of thermal conductıvıty of borıc acıd-water solutıons. 2019. 50(17): p. 1675-1684
  6. Hussein, A.K., et al., The effect of the baffle length on the natural convection in an enclosure filled with different nanofluids. Journal of Thermal Analysis and Calorimetry, 2020
  7. Said, Z., et al., Recent advances on nanofluids for low to medium temperature solar collectors: energy, exergy, economic analysis and environmental impact. Progress in Energy and Combustion Science, 2021. 84: p. 100898
  8. Maxwell, J.C., A treatise on electricity and magnetism, Clarendon. Oxford, 1881. 314: p. 1873
  9. Choi, S.U. and J.A. Eastman, Enhancing thermal conductivity of fluids with nanoparticles. 1995, Argonne National Lab., IL (United States)
  10. Bazdar, H., et al., Numerical investigation of turbulent flow and heat transfer of nanofluid inside a wavy microchannel with different wavelengths. Journal of Thermal Analysis and Calorimetry, 2020. 139(3): p. 2365-2380
  11. Keklikcioglu, O., T. Dagdevir, and V. Ozceyhan, Heat transfer and pressure drop investigation of graphene nanoplatelet-water and titanium dioxide-water nanofluids in a horizontal tube. Applied Thermal Engineering, 2019. 162: p. 114256
  12. Khanafer, K., K. Vafai, and M. Lightstone, Buoyancy-driven heat transfer enhancement in a two-dimensional enclosure utilizing nanofluids. International journal of heat and mass transfer, 2003. 46(19): p. 3639-3653
  13. Hwang, K.S., J.-H. Lee, and S.P. Jang, Buoyancy-driven heat transfer of water-based Al2O3 nanofluids in a rectangular cavity. International Journal of Heat and Mass Transfer, 2007. 50(19-20): p. 4003-4010
  14. Abu-Nada, E., Effects of variable viscosity and thermal conductivity of Al2O3–water nanofluid on heat transfer enhancement in natural convec