SavedAdd your journal

Journals / Hittite Journal of Science and Engineering / 2019 / Cilt: 6 - Sayı: 4

Decoupled Cascaded PID Control of an Aerial Manipulation System

Ali Emre Turgut
Nebi Bulut
Pages
251–259
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The proposed control algorithms performed satisfactorily and showed very low absolute errors

📌 3 Key Takeaways

🎯
Objective & Hypothesis:T his paper presents the control of an aerial manipulation system with a quadrotor and a 2-DOF robotic arm.
📊
Key Findings & Data:Then, to derive the dynamics of the system, the quadrotor and the 2-DOF robotic arm are modeled as a combined system.
💡
Conclusion & Impact:The proposed control algorithms performed satisfactorily and showed very low absolute errors
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Aerial manipulation · Robotics · Quadrotor

Abstract

T his paper presents the control of an aerial manipulation system with a quadrotor and a 2-DOF robotic arm. Firstly, the kinematic model of the combined system and the Denavit-Hartenberg parameters of the serial robotic arm are obtained. Then, to derive the dynamics of the system, the quadrotor and the 2-DOF robotic arm are modeled as a combined system. The Lagrange-d'Alembert formulation is used to obtain the equation of motion of the combined system. Later, decoupled controllers are developed for the generalized coordinates. Decoupled cascaded PID controllers are designed for trajectory tracking of the combined system. Proposed control algorithms are implemented in the MATLAB/Simulink environment and tested using the highly nonlinear system model in simulation. The robustness of the controllers is checked by applying disturbance forces from different directions at the tip point of the 2-DOF robotic arm. The proposed control algorithms performed satisfactorily and showed very low absolute errors

🔖

Cite This Article

Turgut, A. E., Bulut, N. (2022). Decoupled Cascaded PID Control of an Aerial Manipulation System. Hittite Journal of Science and Engineering, Cilt: 6 - Sayı: 4, 251–259. https://ajindex.com/articles/537982

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Kotarski, Denis, Zoran Benić, and Matija Krznar. Control design for unmanned aerial vehicles with four rotors. Interdisciplinary Description of Complex Systems: INDECS 14.2 (2016) 236-245
  2. Das, Abhijit, Kamesh Subbarao, and Frank Lewis. Dynamic inversion with zero-dynamics stabilisation for quadrotor control. IET Control Theory and Applications 3.3 (2009) 303-314
  3. Sadr, Sara, S. Ali A. Moosavian, and Payam Zarafshan. Dynamics modeling and control of a quadrotor with swing load. Journal of Robotics 2014 (2014) 1-12
  4. Mahony, Robert, Vijay Kumar, and Peter Corke. Multirotor aerial vehicles: Modeling, estimation, and control of quadrotor. IEEE Robotics and Automation Magazine 19.3 (2012) 20-32
  5. Goodarzi FA, Lee D, Lee T. Geometric stabilization of a quadrotor UAV with a payload connected by flexible cable. In 2014 American Control Conference, pp. 4925-4930, 2014
  6. Sreenath K, Kumar V. Dynamics, control and planning for cooperative manipulation of payloads suspended by cables from multiple quadrotor robots. In Robotics: Science and Systems IX, 2013
  7. Alothman, Y., Guo, M., & Gu, D. Using iterative LQR to control two quadrotors transporting a cable-suspended load. IFACPapersOnLine 50.1 (2017) 4324-4329
  8. Kim S, Choi S, Kim HJ. Aerial manipulation using a quadrotor with a two DOF robotic arm. In 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 4990- 4995. 2013
  9. Caccavale, F., Giglio, G., Muscio, G., & Pierri, F. Adaptive control for UAVs equipped with a robotic arm. IFAC Proceedings Volumes 47.3 (2014) 11049-11054
  10. Jimenez-Cano A, Martin J, Heredia G, Ollero A, Cano R. Control of an aerial robot with multi-link arm for assembly tasks. In 2013 IEEE International Conference on Robotics and Automation, pp. 4916-4921, 2013
  11. Danko TW, Chaney KP, Oh PY. A parallel manipulator for mobile manipulating UAVs. In 2015 IEEE International Conference on Technologies for Practical Robot Applications (TePRA), pp. 1-6, 2015
  12. Orsag M, Korpela C, Bogdan S, Oh P. Lyapunov based model reference adaptive control for aerial manipulation. In 2013 International Conference on Unmanned Aircraft Systems (ICUAS), pp. 966-973, 2013
  13. Khalifa A, Fanni M. A new quadrotor manipulation system: Modeling and point-to-point task space control. International Journal of Control, Automation and Systems 15.3 (2017) 1434–46
  14. Giglio G, Pierri F. Selective compliance control for an unmanned aerial vehicle with a robotic arm. In 22nd Me