SavedAdd your journal

Journals / Hacettepe Dişhekimliği Fakültesi Derg.(. Clinical Dentistry and Research) / 2008 / Cilt: 32 - Sayı: 2

CAD/CAM applications in fixed restorations

Sabit restorasyonlarda CAD/CAM uygulamaları

Bahadır ERSU
Şenay CANAY
Bulem YÜZÜGÜLLÜ
Pages
58–72
Publication Date
2022-10-17
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The aim of the review is to evaluate new developments in CAD/CAM technologies in a wide spectrum.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Over the last years, developments in CAD/CAM (computer aided design/computer aided manufacture) technologies have increased widely.
📊
Key Findings & Data:Number of products in the market have tripled within the last five years.
💡
Conclusion & Impact:The aim of the review is to evaluate new developments in CAD/CAM technologies in a wide spectrum.
🔬Design:Review & Systematic Survey
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Over the last years, developments in CAD/CAM (computer aided design/computer aided manufacture) technologies have increased widely. Number of products in the market have tripled within the last five years. Final innovations in CAD/CAM, developments in digitization, computer programmes and software, and fixed restoration choices have been presented, also new materials and current production trends have been evaluated. The new technologies provide lower cost, are biocompatible and present high quality restorations with good esthetics and function. The aim of the review is to evaluate new developments in CAD/CAM technologies in a wide spectrum.

Özet

Günümüzde özellikle CAD/CAM (bilgisayar ile tasarım/bilgisayar ile üretim) teknolojisi üzerindeki gelişmeler belirgin derecede artmıştır. Son beş yılda dental pazara sunulan ürünlerin sayısında üç kat artış olmuştur. CAD/CAM üzerine geliştirilen en son yenilikler, dijital okumada, bilgisayar programlarında ve yazılımlarındaki gelişmeler, ve ayrıca yapılabilecek sabit restorasyon çeşitlerinin anlatıldığı bu derlemede, üretilen yeni materyaller ve uygulamalarındaki güncel gelişmeler değerlendirilmiştir. CAD/CAM teknolojisi maliyeti azaltmakta olup, biyouyumluluk, estetik ve fonksiyon açısından yeni geliştirilmiş yüksek kaliteli materyallerden restorasyon yapımına olanak tanımaktadır. Bu derlemenin amacı CAD/ CAM teknolojisindeki yeniliklerin geniş bir yelpazede incelenmesidir.

🔖

Cite This Article

ERSU, B., CANAY, Ş., YÜZÜGÜLLÜ, B. (2022). CAD/CAM applications in fixed restorations. Hacettepe Dişhekimliği Fakültesi Derg.(. Clinical Dentistry and Research), Cilt: 32 - Sayı: 2, 58–72. https://ajindex.com/articles/528393

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Mörmann WH. The origin of the Cerec method: a personal review of the first 5 years. Int J Comput Dent 2004; 7(1): 11-24
  2. Leinfelder KF, Isenberg BP, Essig ME. A new method for generating ceramic restorations: A CAD/CAM system. J Am Dent Assoc 1989; 118: 703-707
  3. Strub JR, Rekow ED, Witkowski S. Computer-aided design and fabrication of dental restorations: Current systems and future possibilities. J Am Dent Assoc 2006; 137(9): 1289-1296
  4. Giordano R. Materials for chairside CAD/CAM-produced restorations. J Am Dent Assoc 2006; 137(9 Supplement):14S-21S
  5. Fasbinder DJ. Clinical performance of chairside CAD/CAM restorations. J Am Dent Assoc 2006; 137: 225-315
  6. Raigrodski AJ. Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literature. J Prosthet Dent. 2004 Dec;92(6):557-62
  7. Sjögren G, Molin M, van Dijken JWV. A 10-year prospective evaluation of CAD/CAM-manufactured (Cerec) ceramic inlays cemented with a chemically cured or dual-cured resin composite. Int J Prosthodont 2004; 17: 241-246
  8. Denissen HW, van der Zel JM, van Waas MAJ. Measurement of the margins of partial-coverage tooth preparations for CAD/CAM. Int J Prosthodont 1999; 12: 395-400
  9. Williams RJ, Bibb R, Rafik T. A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying. J Prosthet Dent 2004; 91: 85-88
  10. Marchack CB. CAD/CAM-guided implant surgery and fabrication of an immediately loaded prosthesis for a partially edentulous patient. J Prosthet Dent 2007; 97: 389-394
  11. Williams RJ, Bibb R, Eggbeer D, Collis J. Use of CAD/ CAM technology to fabricate a removable partial denture framework. J Prosthet Dent 2006; 96: 96-99
  12. Bibb R, Bocca A, Evans P. An appropriate approach to computer aided design and manufacture of cranioplasty plates. J Maxillofac Prosthet Technol 2002; 5: 28-31
  13. Chen LH, Tsutsumi S, Iizuka T. A CAD/CAM technique for fabricating facial prosthesis: A preliminary report. Int J Prosthodont 1997; 10: 467-472
  14. Yüzügüllü B, Avcı M. The Implant-Abutment Interface of Alumina and Zirconia Abutments. Clin Implant Dent Relat Res. 2008 Jan 24; [Epub ahead of print] 15. Drago CJ, Peterson T. Treatment of an edentulous patient with CAD/CAM technology: A clinical report. J Prosthodont 2007; 16: 200-208
  15. Kupeyan HK, Shaffner M, Armstrong J. Definitive CAD/ CAM-guided prosthesis for immediate loading of bonegrafted maxilla: A case report. Clin I