Journals / Geomatik / 2021 / Cilt: 6 - Sayı: 2

Noise Analysis at CORS-TR Stations, A Case Study South-East Turkey

TUSAGA-AKTİF İstasyonlarında Gürültü Analizi, Türkiye’ nin Güneydoğusu Örneği

Journal
Geomatik
Pages
135–147
Publication Date
2022-10-19
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Considering the comparisons, It has been concluded that the use of noise-removed velocities in basic geodetic measurements has not much contribution for users in practice, because there is a proximity below mm between noisy and noiseless velocities.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:GNSS (Global Navigation Satellite System) is a frequently used method for determining point positions.
📊
Key Findings & Data:GNSS data of 7 years has been evaluated with Bernese v5.2 Scientific GNSS software by selecting a day from every week between the years 2013-2019 and velocities components have been given by analyzing with CATS software.
💡
Conclusion & Impact:Considering the comparisons, It has been concluded that the use of noise-removed velocities in basic geodetic measurements has not much contribution for users in practice, because there is a proximity below mm between noisy and noiseless velocities.
🔬Design:Research Article
📍Scope:2013-2019 Verileri
⚙️Variables:Domain Parameters

Abstract

GNSS (Global Navigation Satellite System) is a frequently used method for determining point positions. When determining point positions with GNSS, It should be paid attention to both GNSS measurement errors and noise affecting GNSS frequencies. While GNSS measurement errors can be reduced with an appropriate measurement method, the noise affecting GNSS signals are resolved as a result of analyzes. In this study, It has been determined noise-removed velocity components at TUSAGA-Active stations in southeast of Turkey and the differences between noise-loaded and noise removed velocities were interpreted. GNSS data of 7 years has been evaluated with Bernese v5.2 Scientific GNSS software by selecting a day from every week between the years 2013-2019 and velocities components have been given by analyzing with CATS software. Considering the comparisons, It has been concluded that the use of noise-removed velocities in basic geodetic measurements has not much contribution for users in practice, because there is a proximity below mm between noisy and noiseless velocities. While differences between the measurement epoch and the reference epoch increase, the errors increase also. Therefore the use of noise-removed velocities in geodetic studies that require high accuracy will greatly affect the position and accuracy at the point to be calculated.

Özet

Uydularla Konum Belirleme Sistemi (GNSS, Global Navigation Satellite System) ile noktakonumlarının belirlenmesi sıklıkla kullanılan bir yöntemdir. GNSS ile nokta konumlarıbelirlenirken hem GNSS ölçü hatalarına, hem de GNSS frekanslarını etkileyen gürültüleredikkat edilmesi gerekmektedir. GNSS ölçü hataları uygun ölçme yöntemi, kullanılanekipmanla vb. giderilebilirken, GNSS sinyallerini etkileyen gürültüler ise analizlersonucu giderilmektedir. Bu çalışmada, Türkiye’nin güneydoğusunda bulunan TUSAGAAktif istasyonlarında gürültü bileşenlerinden arındırılmış hız bileşenleri belirlenmiş vearalarında farklar yorumlanmıştır. Gerçekleştirilen çalışmada 2013-2019 yıllarıarasında her haftadan bir gün seçilerek 7 yıllık GNSS verisi Bernese v5.2 Bilimsel GNSSyazılımı ile değerlendirilmiş ve CATS yazılımı ile analiz edilerek hız bileşenleriverilmiştir. Yapılan karşılaştırmalar dikkate alındığında gürültüden arındırılmış vearındırılmamış hızlar arasında mm altı bir yakınlık olduğundan dolayı aslında temeljeodezik ölçmelerde gürültüden arındırılmış hızların kullanımının pratikte kullanıcılaraçok katkı sağlamayacağı ancak ölçü epoğu ile referans epoğu arasındaki farklar arttıkçahata miktarının da artacağından dolayı yüksek doğruluk gerektiren jeodezikçalışmalarda ise gürültüden arındırılmış hızların kullanılmasının hesaplanacak noktakonum ve doğruluğunu büyük oranda etkileyeceği sonucuna varılmıştır.

🔖

Cite This Article

Başçiftçi, F. (2022). Noise Analysis at CORS-TR Stations, A Case Study South-East Turkey. Geomatik, Cilt: 6 - Sayı: 2, 135–147. https://ajindex.com/articles/524699

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Agnew, D.C. (1992). The Time-Domain Behavior of Power-Law Noises. Geophys Research Letters, 19,333-336, https://doi.org/10.1029/91GL02832
  2. Aktuğ, B., Kurt, M., Parmaksız, E., Lenk, O., Erkan, Y. ve Aysezen, Ş. (2011). Türkiye’de Sabit GNSS İstasyonlarının Tarihi ve Türkiye Ulusal Sabit GPS İstasyonları Ağı-Aktif (TUSAGA-Aktif). TMMOB Harita ve Kadastro Mühendisleri Odası 13. Türkiye Harita Bilimsel ve Teknik Kurultayı, Ankara.
  3. Aktuğ, B. (2003). ITRF Hız Alanı ve Göreli Hız Referans Sistemlerine Bakış, Harita Dergisi, Ankara.
  4. Altamimi, Z., Sillard, P. ve Boucher, C. (2003). The Impact of NNet Rotation Condition on ITRF2000.
  5. Geophysical Research Letters, Vol.30, No.2, 1064. Anand, S. (2016). Everything About Time Series Analysis And The Components of Time Series Data. https://www.linkedin.com/pulse/everythingtime-series-analysis-components-data-saranyaanandh: Accesed date: 16.07.2018.
  6. Başçiftçi, F. (2017). GNSS Verileri Kullanılarak İyonosfer Modelinin Oluşturulması ve Global Modellerle Karşılaştırılması. Doktora Tezi, Selçuk Üniversitesi,
  7. Fen Bilimleri Enstitüsü, Konya. Başçiftçi, F., İnal, C., Yıldırım, Ö. Ve Bülbül, S. (2018). Automatic Data Downloading Program (DDP) in Determining Regional Ionosphere Model. Journal of New Results in Science, 7 (1), 17-28.
  8. Beran, J. (1994).
  9. Statistics for Long-Memory Processes, Monogr Stat Appl Probab, 61, 315 pp. Chapman and Hall, New York. Bülbül, S. (2019). TUSAGA-AKTİF Noktalarında Renkli Gürültülerden Arındırılmış Hız Bileşenlerinin Belirlenmesi. Doktora Tezi, Konya Teknik Üniversitesi,
  10. Lisansüstü Eğitim Enstitüsü, Konya, 179. Bülbül, S., ve İnal, C. (2019). Noise Analysis In CORSTr Stations -Case Of ADAN Station, Euroasia International Congress On Applied Sciences-II, Hatay. Bülbül, S., İnal, C., Yıldırım, Ö. ve Başçiftçi, F. (2017). Velocity Estimation of Turkish National Permanent GNSS Network Active Points Located at Central Anatolia Region, Bilge International Journal of Science and Technology Research. Bos, M. S., Bastos, L. ve Fernandes, R. M. S. (2010). The Influence of Seasonal Signals on The Estimation of The Tectonic Motion in Short Continuous GPS Time-Series, Journal of Geodynamics, 49, 205- 209, https://doi.org/10.1016/j.jog.2009.10.005
  11. Cucci, L., De Martini, P. M., Masana, E. ve Vanneste, K. (2012). Active Tectonics around The Mediterranean Region: Site Studies and Application of New Methodologies. Annals of Geophysics, 55 (5), 843-846, doi: 10.4401/ag6272 Davis, A., Marshak, A., Wiscombe, A. ve Cahalan,