Journals / Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi / 2008 / Cilt: 23 - Sayı: 4

The effects of controlled-permeable formworks on the surface hardness of the concrete

Kontrollü geçirgen kalıpların beton yüzey sertliği üzerine etkileri

Pages
885–894
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In addition, formworks with liner gave better surface hardness compared to the others.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The purpose of this study was to investigate the effects of different formworks on the surface hardness of the concretes under long-term atmospheric conditions.
📊
Key Findings & Data:Ten wall formworks (2 Scots pine, 2 Black poplar, 1 stell iron and 5 plywood) with different surface properties were constructed in this study.
💡
Conclusion & Impact:In addition, formworks with liner gave better surface hardness compared to the others.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The purpose of this study was to investigate the effects of different formworks on the surface hardness of the concretes under long-term atmospheric conditions. Ten wall formworks (2 Scots pine, 2 Black poplar, 1 stell iron and 5 plywood) with different surface properties were constructed in this study. Three out of five plywoods were prepared with holes and canals and these prepared formworks were covered with different types of geotextile liners. The concrete was casted into all formworks under the same conditions. The prepared concrete walls were kept under atmospheric conditions for six years in horizontal position. Every year, the surface hardness of the concrete walls were determined with a Schmidt hammer. The findings were evaluated regarding the climate conditions. The findings of this study indicated that the concrete blocks containing geotextile liners were less affected from climate conditions. In addition, formworks with liner gave better surface hardness compared to the others.

Özet

Bu araştırmanın amacı; farklı yüzey özelliklerine sahip kalıplardan elde edilen ve uzun süreli atmosfer şartlarında maruz bırakılan betonların yüzey sertliklerindeki değişimi araştırmaktır. Değişik yüzey özelliklerine sahip 10 adet perde duvar kalıbı hazırlanmıştır. Bazı kalıp yüzeylerine drenaj kanal ve delikleri açılarak farklı geotekstil astarlarla kaplanmıştır. Bütün kalıplara eşit şartlarda beton dökülmüştür. Elde edilen beton duvarlar yatay pozisyonda 6 yıl süre ile atmosfer şartlarına maruz bırakılmıştır. Beton duvarlara her yıl Schmidt Çekici ile yüzey sertliği deneyi uygulanmıştır. Ayrıca betonun maruz kalmış olduğu iklim koşulları incelenmiştir. Sonuç olarak; yüzeyi geotekstil astarlarla kaplı kalıplardan elde edilen betonların atmosferik etkilerden daha az zarar gördüğü, astarlı kalıplardan üretilen betonların astarsız kalıplara dökülenlerden daha iyi yüzey sertliği değerlerine sahip olduğu görülmüştür.

🔖

Cite This Article

SUBAŞI, S., ARSLAN, M. (2022). The effects of controlled-permeable formworks on the surface hardness of the concrete. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, Cilt: 23 - Sayı: 4, 885–894. https://ajindex.com/articles/523915

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Arslan, M., “Betonarme Yapı Elemanı Tasarımında Dayanıklılık faktörlerinin Belirlenmesine Yönelik Bir Araştırma”, Gazi Ü, Fen Bilimleri Enstitüsü Dergisi, Cilt 9, No 4, 625-630,1995
  2. Matta, Z.G., “More Deterioration of Reinforced Concrete in the Arabian Gulf”, Concrete International, 50-51, November, 1993
  3. Berke, N.S., “Corrosion Inhibitors in Concrete”, Concrete International, 24-47, July, 1991. Yıllar 4. Arslan, M., “The effects of permeable formworks with sucker liners on the physical properties of concrete surfaces”, Construction and Building Materials, Cilt 15, 149-156, 2001
  4. Arslan, M., "Su Emici Astarlı ve Drenaj Özelliği Bulunan Kalıpların Beton Yüzey Özellikleri Üzerine Etkileri", Tr,J,of Engineering and Environmental Science, Cilt 23, 121-131, 1999
  5. Arslan, M., “Su Emici Astarlı ve Drenajlı Düşey Kalıp Yüzeylerinin Beton Kabuğu Fiziksel Özellikleri ve Donatı Korozyonu Üzerine Etkileri”, TMMOB İnşaat Mühendisleri Odası Teknik Dergi, Cilt 10, No 2,1909-1925,1999
  6. Neville, A.M., “Properties of concrete”, Fourth and Final Edition, Pearson Prentice Hail, England, 303-306, 391-394, 504-505, 581-585, 605-609, 610-624, 2003
  7. Malhotra, V.M. ve Carino, N.J., Hondbook on Nondestructive Testing of Concrete, CRC Pres, London, England, 2004
  8. Mindess, S., Joung, J.F., Danvin, D,, “Concrete”, Second Edition Prentice Hail, London, 499-504, 2002. 10
  9. TS 3260., “Beton Yüzey Sertliği Yolu İle Yaklaşık Beton Dayanımının Tayini Kuralı”, Ankara, Eylül, 1978
  10. Long, A.E., and Basheer, P., “The influence of controlled permeability formwork liners on the durability related characteristics of concrete”, ACI Fail Convention, American Concrete Institute, Farmington Hills, 32-37, 1997
  11. Marosszeky, M., and Chew, M.Y.L., “Textile form method to improve concrete durability”, Report 1/90, Building Research Centre, Sydney, Australia, 14-26, 1990 13. Arslan, M., Şimşek, O., Subaşı, S., “Effects of formwork surface materials on concrete lateral pressure”, Construction and Building Materials, No 19, 319- 325, 2005
  12. Subaşı, S., Arslan, M., Durmuş, G., “Kalıp teknolojilerindeki gelişmelerin betonarme elemanların dayanıklılığına etkileri”, 3. Uluslararası İleri Teknolojiler Sempozyumu, Ankara, 4: 355-370, 2003
  13. Yokota, T., ve ark., “Development of Textile Form Method in Aheiashi-Gawa Dam”, Civil Engineering Division, Kumagai Gumi Co, 1986
  14. Machida, N., ve ark., “Studies on Improvement of Concrete Quality by Textile Form Method, Atomic Energ