Journals / Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi / 2021 / Cilt: 22 - Sayı: 1

The use of portable winch for forest harvesting operations in Pinus pinaster plantation areas

Sahilçamı (Pinus pinaster Ait.) plantasyon alanlarında el vincinin odun üretim çalışmalarında kullanımı

Pages
1–8
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Hourly fuel consumption of the hand winch was determined as 1.4 lt/h.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In parallel with the increase in the population in Turkey, there has been a significant increase in the amount of wood production in recent years.
📊
Key Findings & Data:This increase, which occurs in the amount of wood production, makes it imperative to innovate in production of forest products.
💡
Conclusion & Impact:Hourly fuel consumption of the hand winch was determined as 1.4 lt/h.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In parallel with the increase in the population in Turkey, there has been a significant increase in the amount of wood production in recent years. This increase, which occurs in the amount of wood production, makes it imperative to innovate in production of forest products. Especially in wood production, the use of portable and low-cost new technologies and machines has become important. Among these machines, portable winches have been used in forest operations in the world and in Turkey as well in recent years. These winches are very useful machines in terms of installation and uninstallation. In this study, the use of portable winch in the Sahilçamı plantation areas within the boundaries of Sarıyer Forest Operation Directorate affiliated to the Istanbul Forest Regional Directorate has been examined. As a result of the studies, the hourly yield of the portable winch at an average skid distance of 50 meters was found as 1.110 m3/hr and the daily yield was found as 8.800 m3/day. Hourly fuel consumption of the hand winch was determined as 1.4 lt/h.

Özet

Ülke nüfusunun artışına paralel olarak odun üretim miktarlarında da son yıllarda önemli artışlargörülmektedir. Odun üretim miktarlarında ortaya çıkan bu artış üretim çalışmalarında da yenilikleregitmeyi zorunlu kılmaktadır. Özellikle odun üretim çalışmalarında taşınabilir ve düşük maliyetli yeniteknolojilerin ve makinelerin kullanımı önemli bir hal almıştır. Bu makineler arasında el vinçleri sonyıllarda ülkemizde ve dünya ormancılık çalışmalarında da kullanılmaya başlanmıştır. Bu vinçlerkurulumu ve sökülmesi yanında kullanım açısından da çok kullanışlı makinelerdir. Bu çalışmada,İstanbul Orman Bölge Müdürlüğü’ne bağlı Sarıyer Orman İşletme Şefliği sınırları içerisinde yer alanSahilçamı plantasyon sahalarında el vincinin kullanımı incelenmiştir. Çalışmalar sonucunda el vincininortalama 50 metrelik sürütme mesafesinde saatlik verimi 1.10 m3/sa ve günlük verimi 8.80 m3/günolarak bulunmuştur. El vincinin saatlik yakıt tüketimi ise 1.4 lt/sa olarak belirlenmiştir.

🔖

Cite This Article

ÖZTÜRK, T., ŞENTÜRK, N. (2022). The use of portable winch for forest harvesting operations in Pinus pinaster plantation areas. Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi, Cilt: 22 - Sayı: 1, 1–8. https://ajindex.com/articles/450581

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Acar HH, Ünver-Okan S, Üçüncü K (2015) Assessment on uphill yarding with the combination of log chute and portable winch. EurJ Forest Eng 1(1): 34-40
  2. Akay AE, Sert M, Gülci N (2014) Hafif eğimli arazilerde benzinli el vinci ile bölmeden çıkarma çalışmalarının verim açısından değerlendirilmesi. II. Ulusal Akdeniz Orman ve Çevre Sempozyumu, 22-24 Ekim 2014, Isparta, pp 281-290
  3. Aktekin AT (2018) Odun üretim çalışmalarında verimlilik ve iş güvenliği üzerine teknik analizler. İstanbul Üniversitesi-Cerrahpaşa, Lisansüstü Eğitim Enstitüsü, Yüksek Lisans Tezi, İstanbul, 39 s Anonim (2012) Sarıyer Orman İşletme Şefliği Amenajman Planı Anonim (2019) IBM SPSS istatistik programı (Kurulum CD’si) Bilici E, Andiç VG, Akay AE, Sessions J (2019) Productivity of a portable winch system used in salvage logging of storm-damaged timber. Croation Journal of Forest Engineering 40(2): 311-318
  4. Gülci N, Akay AE, Erdaş O (2014) Benzinli el vincinin odun hammaddesinin bölmeden çıkarılmasında kullanım imkanları. Orman Mühendisliği Dergisi Ocak/Şubat/Mart Sayısı: 24-28
  5. Gülci N, Yüksel K, Akay AE (2017) Kar üzerinde odun hammaddesinin taşınabilir el vinci ile sürütülmesinin verim açısından değerlendirilmesi. Kastamonu Üniversitesi Orman Fakültesi Dergisi 17(1): 124-131
  6. Gümüşay OO (2006) Ekim Makinası İmalatında Zaman Etüdü. Ankara Üniversitesi Fen Bilimleri Enstitüsü, Yüksek Lisans Tezi, Ankara, 6- 12 s Hiesl P, Benjamin JG (2012) Cycle time analysis of harvesting equipment from an early commercial-thinning treatment in Maine. 35th Council on Forest Engineering Annual Meeting, New Bern, North Carolina, pp 1-14
  7. LeDoux CB, Huyler NK (2000) Cost comparisons for three harvesting systems operating in nrthern hardwood stands. USDA Forest Services Research Paper NE-715, pp 1-4
  8. Mellgren PG, Claire P (1989) More reliable multi-function woodharvesting machines in the future? Journal of Forest Engineering 1(1): 17-22
  9. McDonald TO, Fulton JP (2005) Automated time study of skidder using global positioning system data. Computers and Electronics in Agriculture 48: 19-37
  10. Moskalik T, Borz SA, Dvorak J, Ferencik M, Glushkov S, Muiste P, Lazdins A, Styranivsky O (2017) Timber harvesting methods in eastern european countries: A review Croat J For Eng 38(2): 231- 241 Russell F, Mortimer D (2005) A review of small-scale harvesting systems in use worldwide and their potential application in Irish forestry. National Council for Forest Research and Development, Ireland, pp 5-6
  11. Sticha V, Holusa J, Sloup R, Macku