Journals / Tasarım+Kuram / 2019 / Cilt: 15 - Sayı: 27

Evaluation of Industrial Designs by Using Analytical Hierarchy Process and Parallel Prototyping

Pages
85–99
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Bu da sonuç olarak genel tasarım kalitesine olumlu etki yapacaktır.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Bu yazı, teorik ve uygulamalı bir çok alanda kullanılan analitik hiyerarşi süreci ve paralel prototip kavramları ve onların endüstri ürün tasarımı sürecine uyarlanışı üzerinedir.
📊
Key Findings & Data:Doğrulayıcı ek yöntem olarak çalışmada yer alan PROMETHEE yöntemine de kısaca değinildikten sonra içinde ürün tasarımlarının değerlendirildiği bir alan çalışması sunulmaktadır.
💡
Conclusion & Impact:Bu da sonuç olarak genel tasarım kalitesine olumlu etki yapacaktır.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Bu yazı, teorik ve uygulamalı bir çok alanda kullanılan analitik hiyerarşi süreci ve paralel prototip kavramları ve onların endüstri ürün tasarımı sürecine uyarlanışı üzerinedir. Öncelikle prototip kavramı tanıtılmakta, sonrasında AHP açıklanmaktadır. Doğrulayıcı ek yöntem olarak çalışmada yer alan PROMETHEE yöntemine de kısaca değinildikten sonra içinde ürün tasarımlarının değerlendirildiği bir alan çalışması sunulmaktadır. Alan çalışmasında kullanılmak üzere, daha önceden yapılmış çeşitli taşınabilir aydınlatma ürünü tasarımları arasından 3 tanesi seçilmiştir. Bunların çalışan prototiplerinin üretilebilmesi için tasarımlar bilgisayarda modellenmiş, gövde parçalarının üretilebilir ve kullanılabilir olabilmesi için detaylı iç ve dış planlama yapılmıştır. Gövde parçaları 3B yazıcıda üretilmiş ve içlerine tasarlanan elektronik devreler monte edilmiştir. Elde edilen prototipler, çalışmaya katılan 10 tasarımcıyla yapılan görüşmelerde seçilen kriterlere göre değerlendirilmiş, alınan görüşler araştırma verisi olarak kaydedilmiştir. Sonrasında bu veri AHP yöntemi ve doğrulama amacıyla da PROMETHEE yöntemiyle değerlendirilmiştir. Eldeki tasarımların, seçilen kriterlere göre performanslarının sayısal olarak ortaya çıktığı bu değerlendirme sonucunda piyasadaki başarı şansı en yüksek olan tasarım belirlenmiştir. Bu araçların endüstri tasarımındaki karar verme ve değerlendirme süreçlerine uyarlanmasıyla tasarım değerlendirmelerinin daha objektifleştirilebileceği, verilen kararların doğruluğunun arttırılabileceği gösterilmiştir. Bu da sonuç olarak genel tasarım kalitesine olumlu etki yapacaktır.

Özet

This article is about the analytic hierarchy process and parallel prototype concepts used in many theoretical and applied fields and their adaptation to the industrial product design process. Firstly the prototype concept is introduced, followed by AHP. The PROMETHEE method, which is included in the study as an additional validation method, is also briefly discussed and then a field study in which product designs are evaluated is presented. Of the various portable lighting product designs previously made, 3 have been selected for use in field study. In order to produce working prototypes of these, designs are modeled on the computer and detailed interior and exterior planning is done in order to be able to produce and use body parts. Body parts are manufactured in 3D printer and electronic circuits designed for them are mounted. The prototypes obtained were evaluated in interviews with 10 designers participating in the study according to the criteria selected and their opinions were saved as research data. This data was then evaluated using the AHP method and re-evaluated by using the PROMETHEE method for verification purposes. As a result of this process, the performances of the designs according to the selected criteria were calculated numerically and the design which will have the highest chance of success in the market was determined. It has been shown that the design evaluations can be made more objective and the accuracy of given decisions can be increased by adapting these tools to decision making and evaluation processes in industrial design. This, in turn, will have a positive impact on overall design quality

🔖

Cite This Article

ÖZSOY, Ö. H. (2019). Evaluation of Industrial Designs by Using Analytical Hierarchy Process and Parallel Prototyping. Tasarım+Kuram, Cilt: 15 - Sayı: 27, 85–99. https://ajindex.com/articles/403114

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. Ahmad, M. N., Maidin, N. A., Rahman, M. H. A., & Osman, M. H. (2017), Conceptual Design Selection of Manual Wheelchair for Elderly by Analytical Hierarchy Process (AHP) Method, A Case Study, 12(17), 6710–6719.
  2. Ayag, Z. (2002), An analytic-hierarchy-process based simulation model for implementation and analysis of computer-aided systems, International Journal of Production Research, 40(13), 3053–3073. https://doi.org/10.1080/00207540210140059
  3. Ayag, Z. (2010), A combined fuzzy AHP-simulation approach to CAD software selection, International Journal of General Systems, 39(7), 731–756. https://doi.org/10.1080/03081079.2010.495190
  4. Ayag, Z. (2015), Cad software evaluation for product design to exchange data in a supply chain network, International Journal of Supply Chain Management, 4(1), 30–38. Retrieved from http:// www.scopus.com/inward/record.url?eid=2-s2.0-84949765522&partnerID=tZOtx3y1 Ballis, A., & Mavrotas, G. (2007), Freight village design using the multicriteria method PROMETHEE, Operational Research, 7(2), 213–231. https://doi. org/10.1007/BF02942388 Bao, Q., Faas, D., & Yang, M. (2018), Interplay of sketching & prototyping in early stage product design, International Journal of Design Creativity and Innovation, 6(3–4), 146–168. https://doi.org/10.10 80/21650349.2018.1429318 Beaudouin-lafon, M., & Mackay, W. (2003), Prototyping Tools and Techniques. In L. Eribaum (Ed.), The Human-Computer Interaction Handbook (pp. 1006–1031).
  5. Hillsdale, NJ: CRC Press. https://doi. org/10.1201/9781410615862 Behzadian, M., Kazemzadeh, R. B., Albadvi, A., & Aghdasi, M. (2010), PROMETHEE: A comprehensive literature review on methodologies and applications, European Journal of Operational Research, 200(1), 198–215. https://doi.org/10.1016/j.ejor.2009.01.021
  6. Borsci, S., Kuljis, J., Barnett, J., & Pecchia, L. (2014), Beyond the User Preferences: Aligning the Prototype Design to the Users’ Expectations. Human Factors and Ergonomics in Manufacturing, 1(24), 8. https://doi.org/10.1002/ hfm.20611 Brans, J. P. (1982), No TitleL’Ingenierie de la decision, Elaboration d’instrument d’aide a la decision, Methode PROMETHEE, Colloque d’Aide a La Decision, 183–213.
  7. Brans, J. P., & Marescal, B. (1990), The Promethee Methods For Mcdm; The Promcalc, Gaia And Bankadviser Software, In Readings in Multiple Criteria Decision Aid. (pp. 217–252). Berlin: Springer Berlin Heidelberg. https://doi. org/10.1007/978-3-642-75935-2
  8. Camburn, B. A., Jensen, D., Crawford, R., Otto, K., & Wood, K. (2015), E