SavedAdd your journal

Journals / Mühendis ve Makina / 2003 / Cilt: 44 - Sayı: 521

Elektro erozyon ile işlemede elektrot ön yüzey aşınmasının deneysel incelenmesi

ALİ ÖZGEDİK
CAN ÇOĞUN
Pages
21–28
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The experiments have shown that machining parameters and dielectric application conditions were effective on electrode wear rate and front surface wear.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the variations of electrode wear rate and electrode front surface wear were investigated with the varying machining parameters.
📊
Key Findings & Data:The experiments were conducted by using steel workpieces and cylindrical copper tool electrodes with kerosene dielectric under different dielectric application conditions (injection, suction and static), discharge currents and pulse durations.
💡
Conclusion & Impact:The experiments have shown that machining parameters and dielectric application conditions were effective on electrode wear rate and front surface wear.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, the variations of electrode wear rate and electrode front surface wear were investigated with the varying machining parameters. The experiments were conducted by using steel workpieces and cylindrical copper tool electrodes with kerosene dielectric under different dielectric application conditions (injection, suction and static), discharge currents and pulse durations. The experiments have shown that machining parameters and dielectric application conditions were effective on electrode wear rate and front surface wear.

Özet

Bu çalışmada, elektro-erozyon ile işlemede elektrot aşınma hızı ve elektrot ön yüzey aşınmasının işleme parametreleri ile değişimi incelenmiştir. Çelik işparçası, silindirik bakır elektrot ve gazyağı dielektrik kullanılarak değişik dielektrik uygulama yöntemleri (püskürtme, emme ve statik), boşalım akımları ve vurum sürelerinde deneyler yapılmıştır. Deneyler neticesinde, işleme parametrelerinin ve dielektrik uygulama yöntemlerinin, elektrot aşınma hızı ve elektrot ön yüzey aşınması üzerinde etkili olduğu görülmüştür.

🔖

Cite This Article

ÖZGEDİK, A., ÇOĞUN, C. (2003). Elektro erozyon ile işlemede elektrot ön yüzey aşınmasının deneysel incelenmesi. Mühendis ve Makina, Cilt: 44 - Sayı: 521, 21–28. https://ajindex.com/articles/294888

References (15)

  1. Benedict, G.F., 1987, Nontraclitional Machining Processes, New York and Basel Marcel Dekker, Inc, 207-229
  2. Tricarico, C., Delpretti, R., Dauw, D.F., 1988, Geometrical Simulation of the EDM Die-Sinking Process, Annals of the CIRP, 37, 1, 191-196
  3. Crookall, J.R., 1979, A Theory of Planar Electrode Face Wear in EDM, Annals of the CIRP, 28, 1, 125-129
  4. Çoğun, C., Akaslan, Ş., 2002, The Effect of Machining Parameters on Tool Flectrode Wear and Machining Performance in Electric Discharge Machining, KSME International Journal, 16, 1, 46-59
  5. Çoğun, C., Poyrazoğlu, O., 2001, The Variation of Ma¬chining Performance With Machining Parameters in EDM, 2nd International Conference on Design and Production of Dies and Molds, Kuşadası
  6. Chen, Y., Mahdavian, S.M., 1999, Parametric Study Into Erosion Wear in a Computer Numerical Controlled Electro- discharge Machining Process, Wear, 236, 350-354
  7. Mohri, N., Suzuki, M., Furuya, M., Saito, N., 1995, Electrode Wear Process in Electrical Discharge Machining, Annals of the CIRP, 44, 1, 165-168
  8. Chen, S.L., Yan, B.H., Huang, F.Y., 1999, Influence of Kerosene and Distilled Water as Dielectrics on the Electric discharge Machining Characteristics of Tİ-6A1-4V, Journal of Materials Processing Technology, 87, 107-111
  9. König, W., Jörres, L., 1987, Aqueous Solutions of Organic Compounds as Dielectrics for EDM Sinking, Annals of the CIRP, 36, 1, 105-109
  10. Koenig, W., Weill, R., Wertheim, R., Jutzler, W.I., 1977, The Flow Fields in the Working Gap With Electro-Discharge- machining, Annals of the CIRP, 25, 1, 71-76
  11. Yan, B.H., Wang, C.C., 1999, The Machining Characteristics of A1203/6061Al Composite Using Rotary Electro-Discharge Machining With a Tube Electrode, Journal of Materials Processing Technology, 95, 107-111
  12. Lee, S.H., Li, X.P., 2001, Study of the Effect of Machining Parameters on the Machining Characteristics in Electrical Discharge Machining of Tungsten Carbide, Journal of Materials Processing Technology, 115, 344-358
  13. Hocheng, H., Lei, W.T., Hsu, H.S., 1997, Preliminary Study of Material Removal in Electrical-Discharge Machining of SiC/Al, Journal of Materials Processing Technology, 63, SO¬SİS
  14. Çoğun, C., 1990, A Technique and its Application for Evaluation of Materials Contributions in Electric Discharge Machining, International Journal of Machine Tools & Manufacture, 30, 1, 19-31
  15. Çoğun, C., 1990, Rules for Avoiding the Scrap Workpieces in Electric Discharge Machining, Mechani