In the second part of this article, in which the basic properties of titanium and the effects of the cutting tool materials onto machinability were mentioned in the first part, the effects of cutting parameters(cutting speed, feed rate and cutting depth) and the cutting fluid onto machinability is investigated.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:In the second part of this article, in which the basic properties of titanium and the effects of the cutting tool materials onto machinability were mentioned in the first part, the effects of cutting parameters(cutting speed, feed rate and cutting depth) and the cutting fluid onto machinability is investigated.
📊
Key Findings & Data:In the second part of this article, in which the basic properties of titanium and the effects of the cutting tool materials onto machinability were mentioned in the first part, the effects of cutting parameters(cutting speed, feed rate and cutting depth) and the cutting fluid onto machinability is investigated.
💡
Conclusion & Impact:In the second part of this article, in which the basic properties of titanium and the effects of the cutting tool materials onto machinability were mentioned in the first part, the effects of cutting parameters(cutting speed, feed rate and cutting depth) and the cutting fluid onto machinability is investigated.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters
Abstract
In the second part of this article, in which the basic properties of titanium and the effects of the cutting tool materials onto machinability were mentioned in the first part, the effects of cutting parameters(cutting speed, feed rate and cutting depth) and the cutting fluid onto machinability is investigated.
Özet
İlk bölümünde titanyumun genel özelliklerinin ve titanyumun işlenmesinde kullanılan kesici takım malzemelerinin işlenebilirliğe olan etkilerinin konu edildiği çalışmanın ikinci bölümünde temel kesme parametrelerinin (kesme hızı, ilerleme ve kesme derinliği) ve kesme sıvısı kullanımının işlenebilirliğe etkisi incelenecektir.
🔖
Cite This Article
ENSARİOĞLU, C., ÇAKIR, M. C. (2005). Titanyum ve alaşımlarının işlenebilirlik etüdü- Bölüm II. Mühendis ve Makina, Cilt: 46 - Sayı: 547, 21–27. https://ajindex.com/articles/289527
HUA J., SHIVPURI R., Prediction of chip morphology and segmentation during the machining of titanium alloys, Journal of Materials Processing Technology, basım aşamasında (2004)
SRIDHAR B.R., DEVANANDA G., RAMACHANDRA K., BHAT R., Effect of machining parameters and heat treatment on the residual stress distribution in titanium alloy IMI-834, Journal of Materials Processing Technology, Cilt: 139, 2003, 628-634
XU J.H., GENG G.S., Experimental study on the milling of a Ti Beta 21S, Journal of Materials Processing Technology, Cilt: 129, 2002, 190-192
LEI S., LIU W., High-speed machining of titanium alloys using the driven rotary tool, International Journal of Machine Tools & Manufacture, Cilt: 42, 2002, 653-661
CHE-CHERON C.H., Tool life and surface integrity in turning titanium alloy, Journal of Materials Processing Technology, Cilt: 118, 2001, 231-237
HONG Y.S., DING Y., JEONG W.C, Friction and cutting forces in cryogenic machining of Ti 6Al 4V, International Journal of Machine Tools & Manufacture, Cilt: 41, 2001, 2271-2285
NABHANI F., Machining of aerospace titanium alloys, Robotics and Computer Integrated Manufacturing, Cilt: 17, 2001, 99-106
OHKUBO C., WATANABE I., FORD J.P., NAKAJIMA H., HOSOI T., OKABE T., The machinability of cast titanium and Ti-6Al-4V, Biomaterials, Cilt: 21, 2000, 421-428
JAWAID A., CHE-HARON C.H., ABDULLAH A., Tool wear characteristics in turning of titanium alloy Ti-6246, Journal of Materials Processing Technology, Cilt: 92-93, 1999, 329-334
EZUGWU E.O., WANG Z.M., Titanium alloys and their machinability-a review, Journal of Materials Processing Technology, Cilt: 68, 1997, 262-274
KITAGAWA T., KUBO A., MAEKAWA K., Temperature and wear of cutting tools in high-speed machining of Incone1 718 and Ti-6A1-6V-2Sn, Wear, Cilt: 202, 1997, 142-148
SCHUELLER J.K., TLUSTY J., SMITH S., LEIGH E., Advanced machining techniques on titanium rotor parts, American Helicopter Society, 56th Annual Forum, Virginia Beach, VA, May s-2000
NABHANI F., Wear mechanisms of ultra-hard cutting tools materials, Journal of Materials Processing Technology, Cilt: 115, 2001, 402-412
Titanium industries inc. Data and reference guide,www.stormrobot.com/heavies/storm/design /titanium-bible.pdf [1