SavedAdd your journal

Journals / Mobilya ve Ahşap Malzeme Araştırmaları Dergisi / 2025 / Cilt: 8 Sayı: 2

Evaluation of the wood machining characteristics and performance of Melia azedarach L. for furniture

Alvin Vardeleon(Department of Science and Technology, Forest Products Research and Development Institute)0009-0000-6088-1143
Juanito Jimenez(Department of Science and Technology-Forest Products Research and Development Institute)0000-0001-7389-1826
Osward David Ilagan(Department of Science and Technology, Forest Products Research and Development Institute)0009-0004-8095-3158
Edward Paul Marasigan(Department of Science and Technology, Forest Products Research and Development Institute)0009-0006-8000-7414
Pages
373–388
Publication Date
2025-12-16
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Azedarach odununun uygun işleme özelliklerine ve yeterli yapısal bütünlüğe sahip olduğunu ve bu sayede dayanıklı mobilya ve yüksek değerli ahşap işçiliği için uygulanabilir ve sürdürülebilir bir alternatif malzeme olduğunu doğrulamıştır.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Filipin ahşap endüstrisi, sınırlı sayıda ticari egzotik türün yerini dolduracak sürdürülebilir, yerli alternatiflere ihtiyaç duymaktadır.
📊
Key Findings & Data:Bu çalışma, Melia azedarach L.'nin potansiyelini, yüksek değerli mobilya üretimi için işleme özelliklerine ve yapısal performansına odaklanarak değerlendirmiştir.
💡
Conclusion & Impact:Azedarach odununun uygun işleme özelliklerine ve yeterli yapısal bütünlüğe sahip olduğunu ve bu sayede dayanıklı mobilya ve yüksek değerli ahşap işçiliği için uygulanabilir ve sürdürülebilir bir alternatif malzeme olduğunu doğrulamıştır.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Melia azedarach · wood machining · jointing system

Abstract

Filipin ahşap endüstrisi, sınırlı sayıda ticari egzotik türün yerini dolduracak sürdürülebilir, yerli alternatiflere ihtiyaç duymaktadır. Bu çalışma, Melia azedarach L.'nin potansiyelini, yüksek değerli mobilya üretimi için işleme özelliklerine ve yapısal performansına odaklanarak değerlendirmiştir. İşleme testleri (ASTM D-1666-22), türün planyalama, tornalama, delme, şekillendirme ve oyma işlemlerinde genel olarak "İyi" ila "Mükemmel" işlenebilirliğe sahip olduğunu ortaya koymuştur. 25° ve 30° bıçak kama açıları kullanılarak optimum planyalama kalitesi (%98.80 kusursuz alan) elde edilirken, delme kalitesi daha hızlı mil hızlarıyla (2300 ve 3900 dev/dak) önemli ölçüde artırılmıştır. Talaş izleri, puslu damarlar ve yırtık damarlar gibi minimum kusurlar gözlemlenmiştir. Yapısal uygunluk açısından, zıvana ve dübel birleştirme sistemleri kullanan iki prototip koltuk, ISO 7173:1989 seviye 3 test standardı kullanılarak mukavemet ve dayanıklılık değerlendirmesine tabi tutulmuştur. Her iki prototip de tüm statik, yorulma ve darbe gerekliliklerini hatasız bir şekilde başarıyla geçti. Elde edilen bulgular; M. Azedarach odununun uygun işleme özelliklerine ve yeterli yapısal bütünlüğe sahip olduğunu ve bu sayede dayanıklı mobilya ve yüksek değerli ahşap işçiliği için uygulanabilir ve sürdürülebilir bir alternatif malzeme olduğunu doğrulamıştır.

Özet

The Philippine wood industry requires sustainable, indigenous alternatives to supplement limited commercial exotic species. This study evaluated the potential of Melia azedarach L. focusing on its machining characteristics and structural performance for high-value furniture manufacturing. Machining tests (ASTM D-1666-22) revealed the species has generally "Good" to "Excellent" workability across planing, turning, boring, shaping, and mortising. Optimal planing quality (98.80% defect-free area) was achieved using 25° and 30° knife hook angles, while boring quality was significantly enhanced by faster spindle speeds (2300 and 3900 rpm). Minimal defects such as chip marks, fuzzy grain, and torn grain were observed. For structural suitability, two prototype armchairs with mortise-tenon and dowel joint systems were subjected to rigorous strength and durability evaluation using ISO 7173:1989 test level 3. Both prototypes successfully passed all static, fatigue, and impact requirements without failure. The findings confirm that M. azedarach possesses favorable processing qualities and sufficient structural integrity, making it a viable and sustainable substitute material for durable furniture and high-value woodwork.

🔖

Cite This Article

Vardeleon, A., Jimenez, J., Ilagan, O. D., Marasigan, E. P. (2025). Evaluation of the wood machining characteristics and performance of Melia azedarach L. for furniture. Mobilya ve Ahşap Malzeme Araştırmaları Dergisi, Cilt: 8 Sayı: 2, 373–388. https://doi.org/10.33725/mamad.1809583

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (44)

  1. Aguilos, R,, Marquez, C., Adornado, H., and Aguilos, M., (2020). Domesticating commercially important native tree species in the Philippines: Early growth performance level, Forests 11(8), 885, DOI: 10.3390/f11080885
  2. Alipon, M. A., Alcachupas, P. L., Bondad, E. O., and Cortiguerra, E. C., (2017). Properties and utilization of Acacia mangium Willd. timber at different ages and sites in Caraga Region, Philippines, Lignocellulose, 6(2), 74-87.
  3. Alipon, M. A., Bondad, E. O., Gilbero, D. M., Jimenez, J. J. P., Domingo, E. P., and Marasigan, O. S., (2021). Anatomical properties and utilization of 3-, 5-, and 7-yr-old falcata (Falcataria moluccana (Miq.)) Barneby & JW Grimes] from Caraga Region, Mindanao Philippines, Philippine Journal of Science, 150(5), 1307-1319.
  4. Aras, O., and Sofuoğlu, S. D., (2021). The relationship of machining parameters with surface roughness in machining of chestnut (Castenia sativa Mill.) tree species with CNC, Furniture and Wooden Material Research Journal, 4(2), 114-125. DOI:10.33725/mamad.992157
  5. ASTM D1666-2022. Standard test methods for conducting machining tests of wood and wood-base panel materials.
  6. Barboutis, I., and Kamperidou, V., (2021). Shear strength of beech wood joints bonded with commercially produced PVAc D3 adhesives, International Journal of Adhesion and Adhesives, 105, 102774. DOI: 10.1016/j.ijadhadh.2020.102774
  7. Belleville, B., Ashley, P., and Ozarska, B., (2016). Wood planing properties of Australian plantation-grown eucalypts, Maderas. Ciencia y tecnología, 18(3), 425-434. DOI: 10.4067/S0718-221X2016005000038
  8. Carmelo, W.H., (2005). DOST-FPRDI furnace-type lumber dryer, Forest Products Technoflow Series, 14, 1–14. Csanády, E., and Magoss, E., (2013). Mechanics of wood machining (pp. 168-171). Berlin: Springer.
  9. Davis, E. M., (1942). Machining and related characteristics of southern hardwoods. Tech. Bull, 324.
  10. DENR-FMB., (2023). Philippine Forestry Statistics. https://drive.google.com/file/d/1u YMd6FJosiT-12ltzZM8veYujjK_u3t3/view
  11. Derikvand, M., and Ebrahimi, G., (2014). Strength performance of mortise and loose-tenon furniture joints under uniaxial bending moment, Journal of Forestry Research, 25(2), 483–486. DOI: 10.1007/s11676-014-0479-5
  12. Erdil, Y. Z., Kasal, A., and Eckelman, C. A., (2005). Bending moment capacity of rectangular mortise and tenon furniture joints, Forest Products Journal, 55(12), 209–213.
  13. Fern, K., (2014). Melia azedarach. Tropical Plants Database. Retrieved from http://tropical.theferns.info/viewtropical.php?id=Melia+azedarach
  14. Hao, J., Xu, L., Wu, X., and Li, X., (2020). Analysis and modeling of the dowel connection in wood T-type joint for optimal performance, Composite Structures, 253, 112754. DOI: 10.1016/j.compstruct.2020.112754
  15. Hoadley, B.R., (2000) Understanding wood: a craftsmans guide to wood technology. 280 p. Taunton Press.
  16. Hu, W. G., Yu, R. Z., and Yang, P., (2024). Characterizing roughness of wooden mortise and tenon considering effects of measured position and assembly condition. Forests, 15(9), 1584. DOI: 10.3390/f15091584.
  17. ISO 7173:1989. Furniture — Chairs and stools — Determination of strength and durability.
  18. Janíková, N., Šimek, M., Kořený, A., Gaff, M., and Hlavatý, J., (2025). Comparing furniture joint variants using a multi-criteria analysis, Wood Material Science & Engineering, 1-10, DOI: 10.1080/17480272.2024.2445548
  19. Jankowska, A. (2020). Understanding of surface roughness of wood based on analysis its structure and density, Annals of Warsaw University of Life Sciences SGGW Forestry and Wood Technology, 111, 27-31. DOI: 10.5604/01.3001.0014.6421
  20. Jimenez, J.J.P., Escobin, R., and Conda, J.M., (2015). Profile of wood species used in local and imported plywood and their bond performance, Philippine Forest Products Journal, 6, 43-58.
  21. Jimenez, J.J.P., (2023). Drying Characteristics of Pandan (Pandanus simplex Merr.) Leaves Using the DOST-FPRDI Furnace-type Dryer, Philippine Journal of Science, 152, 2139-2147
  22. Jimenez J.J.P., Gilbero, D. M., and Alipon, M. A., (2021). Veneer and plywood properties of yemane (Gmelina arborea Roxb.) from 3-, 5-, and 7-year-old plantation trees. International Wood Products Journal, 12(4), 277-286, DOI: 10.1080/20426445.2021.1979823
  23. Jimenez J.J.P., Gilbero, D. M., and Alipon, M. A., (2022). Evaluation of young falcata plus-trees for veneer and plywood production in the Philippines, Philippine Journal of Science, 151 (6A), 2081-2092
  24. Jimenez, J. J. P., and Ramos, J. E. C., (2023). Gluing characteristics of giant bamboo using four commercial adhesives, Philippine Journal of Science, 152(5), 1809-1822.
  25. Joshi, R. C., (2006). Invasive alien species (IAS): concerns and status in the Philippines. In Proceedings of the International Workshop on the Development of Database (APASD) for Biological Invasion. FFTC, Taichung, Taiwan, China (pp. 1-23).
  26. Kang, C. W., Hashitsume, K., Jang, E., and Kolya, H., (2023). Relationship between wood anatomical features and surface roughness characteristics, Wood Research, 68, 455-464. DOI:10.37763/wr.1336-4561/68.3.455464
  27. Kłos, R., Fabisiak, B., and Ng, H.K.T., (2018). Comparative reliability analysis of selected joints for case furniture, BioResources, 13(3), 5111–5123, DOI: 10.15376/biores.13.3.5111-5123
  28. Kuşkun, T., Smardzewski, J., and Kasal, A., (2021). Experimental and numerical analysis of mounting force of auxetic dowels for furniture joints, Engineering Structures, 226, 111351. DOI:10.1016/j.engstruct.2020.111351
  29. Laina, R., Sanz-Lobera, A., Villasante, A., López-Espí, P., Martínez-Rojas, J. A., Alpuente, J., and Vignote, S., (2017). Effect of the anatomical structure, wood properties and machining conditions on surface roughness of wood, Maderas. Ciencia y tecnología, 19(2), 203-212. DOI:10.4067/S0718-221X2017005000018
  30. Lim, S. C., Ten Choo, K., and Gan, K. S., (2002). The characteristics, properties and uses of plantation timbers-rubberwood and Acacia mangium, Timber Technology Centre, FRIM.
  31. Marasigan, O. S., and Mundin, M. A. M., (2024). Physico-mechanical properties and potential utilization of Melia azedarach L. grown in Quezon Province, the Philippines, Philippine Journal of Science, 153(4), 1429-1441.
  32. Marasigan, O. S., Daguinod, S. A., and Villareal, J. F., (2025). Physico-mechanical properties of two native tree species in the Philippines and their potential as alternatives to exotic industrial tree plantation species, Environment and Natural Resources, 23(4), 343-356, DOI:10.32526/ennrj/23/20250038
  33. Natividad, R. A., (2016). Pioneer tree species: Their potential uses and harvesting constraints, Ecosystems and Development Journal, 6(1), 32-36.
  34. Pinol, A., Perino, E., Pollisco, M., San Valentin, H. O., and Pacho, M. V., (2017). A Report on the Stocktaking of National Forest Invasive Species (FIS) Activities in the Philippines. Asia-Pacific Forest Invasive Species Network (APFISN).
  35. Sergeevichev, A., Vlasov, E., Lebedev, A., and Bogatova, E., (2022). Investigation of the surface quality and tool wear when forming the edges of wood materials, In International School on Neural Networks, Initiated by IIASS and EMFCSC (pp. 1531-1540). Cham: Springer International Publishing.
  36. Stehr, M., and Östlund, S., (2005). An investigation of the crack tendency on wood surfaces after different machining operations, Wood Research and Technology, 54(4), 427-436.
  37. Tankut, A. N., and Tankut, N., (2005). The effects of joint forms (shape) and dimensions on the strengths of mortise and tenon joints, Turkish Journal of Agriculture and Forestry, 29(6), 493-498.
  38. Thoma, H., Peri, L., and Lato, E., (2015). Evaluation of wood surface roughness depending on species characteristics, Maderas. Ciencia y tecnología, 17(2), 285-292, DOI:10.4067/S0718-221X2015005000027
  39. Tsai, T. H., (2023). Value-added to Small-Diameter Timber (Obtained from Hardwood Plantations) (Master of Science Thesis, Purdue University Graduate School).
  40. Tulod, A. M., Casas, J. V., Marin, R. A., and Ejoc, J. A. B., (2017). Diversity of native woody regeneration in exotic tree plantations and natural forest in Southern Philippines, Forest Science and Technology, 13(1), 31-40, DOI:10.1080/21580103.2017.1292958
  41. Uysal, M., and Haviarova, E., (2021). Evaluating design of mortise and tenon furniture joints under bending loads by lower tolerance limits, Wood and Fiber Science, 53(2), 109-125, DOI:10.22382/wfs-2021-13
  42. Vlaović, Z., Gržan, T., Župčić, I., Domljan, D., and Mihulja, G., (2024). Strength, durability, and aesthetics of corner joints and edge banding in furniture design: a review, Applied Sciences, 14(22), 10285. DOI:10.3390/app142210285
  43. Wengert, E. M., (1988). The wood doctor's Rx. Brook Forest Products Center, Department of Forest Products, Virginia Polytechnic Institute and State University. 378 p.
  44. Yaghoubi, S., and Rabiei, F., (2025). A profound evaluation of different strategies to improve surface roughness of manufactured part in wood-CNC machining process, Journal of Engineering Research, 13(3), 1854-1860, DOI: 10.1016/j.jer.2024.05.033