SavedAdd your journal

Journals / Mobilya ve Ahşap Malzeme Araştırmaları Dergisi / 2026 / Cilt: 9 Sayı: 1

Production and investigation of some properties of HDPE composite materials with textile waste and wood flour additives

Tekstil atığı ve odun unu katkılı HDPE kompozit malzemelerinin üretimi ve bazı özelliklerinin incelenmesi

Selim Erkoç(Kahramanmaraş Sütçü İmam Üniversitesi)0009-0004-4159-9969
Mehmet Hakkı Alma(KAHRAMANMARAŞ SÜTÇÜ İMAM ÜNİVERSİTESİ)0000-0001-6323-7230
Tufan Salan(KAHRAMANMARAŞ SÜTÇÜ İMAM ÜNİVERSİTESİ)0000-0002-6500-3646
Mahmut Kılınçkıran(KAHRAMANMARAŞ SÜTÇÜ İMAM ÜNİVERSİTESİ)0000-0002-0550-4668
Pages
190–205
Publication Date
2026-06-30
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Overall, washed cotton waste in the 20–40 mesh range exhibited optimal mechanical properties; this indicates that pretreated textile waste of this size can be used to produce composites suitable for industrial applications.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study examined cotton waste known as “cotton mill filter dust”, a by-product of yarn production, as a filler in high-density polyethylene (HDPE) composites, and compared it with red pine wood flour as a control filler.
📊
Key Findings & Data:The waste was tested in washed and untreated forms, at four particle sizes (20, 40, 60 and 80 mesh) and four loading ratios (10%, 20%, 30% and 40%).
💡
Conclusion & Impact:Overall, washed cotton waste in the 20–40 mesh range exhibited optimal mechanical properties; this indicates that pretreated textile waste of this size can be used to produce composites suitable for industrial applications.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Pamuk atığı · HDPE kompozit · Odun unu

Abstract

This study examined cotton waste known as “cotton mill filter dust”, a by-product of yarn production, as a filler in high-density polyethylene (HDPE) composites, and compared it with red pine wood flour as a control filler. The aim was to turn a textile waste that cannot be reused in spinning into a usable composite material. The waste was tested in washed and untreated forms, at four particle sizes (20, 40, 60 and 80 mesh) and four loading ratios (10%, 20%, 30% and 40%). Composite sheets were produced by hot pressing, and their tensile (ASTM D638), flexural (ASTM D790), impact (ASTM D256), density (dimensional/geometric method) and water absorption (ASTM D7031-11) properties were measured. The data were analysed by one-way ANOVA followed by Tukey's HSD test. Neat HDPE had a tensile strength of 21.63 MPa, a flexural strength of 33.44 MPa and an impact strength of 20.21 J/m, and these values generally decreased as the filler ratio rose. Washing the waste, however, raised the elasticity modulus and gave a stiffer composite; the flexural modulus of the 40% washed sample reached 1617 MPa. Overall, washed cotton waste in the 20–40 mesh range exhibited optimal mechanical properties; this indicates that pretreated textile waste of this size can be used to produce composites suitable for industrial applications.

Özet

Bu çalışmada, iplik üretiminin bir yan ürünü olan ve “klima tozu” olarak bilinen pamuk atığı, yüksek yoğunluklu polietilen (HDPE) kompozitlerde dolgu maddesi olarak incelenmiş ve kontrol grubu dolgu maddesi olarak kullanılan kızılçam odun unu ile karşılaştırılmıştır. Çalışmanın amacı, iplik üretiminde yeniden kullanılamayan bir tekstil atığını, kullanılabilir bir kompozit malzemeye dönüştürmektir. Atık, yıkanmış ve işlenmemiş halleriyle, dört farklı parçacık boyutu (20, 40, 60 ve 80 mesh) ve dört farklı yükleme oranı (%10, %20, %30 ve %40) ile test edilmiştir. Kompozit levhalar sıcak presleme ile üretilmiş ve çekme (ASTM D638), eğilme (ASTM D790), darbe (ASTM D256), yoğunluk (boyutsal yöntem) ve su alma (ASTM D7031-11) özellikleri ölçülmüştür. Veriler tek yönlü ANOVA ve ardından Tukey's HSD testi ile analiz edilmiştir. Saf HDPE'nin çekme mukavemeti 21,63 MPa, eğilme mukavemeti 33,44 MPa ve darbe mukavemeti 20,21 J/m bulunmuştur ve bu değerler genel olarak dolgu oranı arttıkça azalma göstermiştir. Bununla birlikte, atığın yıkanması elastikiyet modülünü arttırmış ve daha sert bir kompozit elde edilmesini sağlamış; %40 oranında yıkanmış numunenin eğilme modülü 1617 MPa'ya ulaşmıştır. Genel olarak, 20-40 mesh aralığındaki yıkanmış pamuk atığı optimum mekanik özellikleri sergilemiş; bu da, bu boyutlardaki ön işleme tabi tutulmuş tekstil atıklarının endüstriyel kullanıma uygun kompozitler üretmek için kullanılabileceğine işaret etmiştir.

🔖

Cite This Article

Erkoç, S., Alma, M. H., Salan, T., Kılınçkıran, M. (2026). Production and investigation of some properties of HDPE composite materials with textile waste and wood flour additives. Mobilya ve Ahşap Malzeme Araştırmaları Dergisi, Cilt: 9 Sayı: 1, 190–205. https://doi.org/10.33725/mamad.1964723

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (27)

  1. Adhikary, K. B., Pang, S., and Staiger, M. P., (2008), Dimensional stability and mechanical behaviour of wood-plastic composites based on recycled and virgin high-density polyethylene (HDPE), Composites Part B: Engineering, 39(5), 807-815, https://doi.org/10.1016/j.compositesb.2007.10.005
  2. Agbo, J. N., Babayemi, A. K., and Aniagor, C. O., (2025), Impact of fiber treatment on water absorption and mechanical properties of pineapple leaf fiber-reinforced polymer composites, Next Research, 2(2), 100274, https://doi.org/10.1016/j.nexres.2025.100274
  3. Ayrılmış, N., Güleç, T., Peşman, E., and Kaymakci, A., (2017), Potential use of cotton dust as filler in the production of thermoplastic composites, Journal of Composite Materials, 51(30), 4147–4155, https://doi.org/10.1177/0021998317698750
  4. Bal, B. C., (2023), Some mechanical properties of WPCs with wood flour and walnut shell flour. Polímeros, 33(2), e20230020, https://doi.org/10.1590/0104-1428.20230005
  5. Bal, B. C., (2025), Alçak yoğunluklu polietilen ve yüksek yoğunluklu polietilen karışımının bazı fiziksel ve mekanik özellikleri üzerine atık MDF tozunun etkisi, Mobilya Ve Ahşap Malzeme Araştırmaları Dergisi, 8(2), 321-333, https://doi.org/10.33725/mamad.1804675
  6. Bal, B. C., and Narlıoğlu, N., (2024), Physical and mechanical properties of composites produced from recycled polypropylene and cardboard-polyethylene-aluminium mixture, Tribology and Materials, 3(4), 163-171, https://doi.org/10.46793/tribomat.2024.018
  7. Dönmez, E. T., ve Türker, E., (2017), Tekstil atıkları içeren yüzeylerin sahip olduğu elektromanyetik kalkanlama, ses ve ısı izolasyonu özellikleriyle ilgili literatür incelemesi, Tekstil ve Mühendis, 24(106), 124-135, https://doi.org/10.7216/1300759920172410609
  8. Erkoç, S., (2026), Tekstil atıklarından çeşitli fonksiyonel kompozit malzeme üretimi ve karakterizasyonu, Kahramanmaraş Sütçü İmam Üniversitesi, Fen Bilimleri Enstitüsü, Devam Eden Doktora Tezi, Kahramanmaraş, Türkiye
  9. Fazli, A., Stevanovic, T., and Rodrigue, D., (2022), Recycled HDPE/natural fiber composites modified with waste tire rubber: A comparison between injection and compression molding, Polymers, 14(15), 3197, https://doi.org/10.3390/polym14153197
  10. Fu, S.-Y., and Lauke, B., (1996), Effects of fiber length and fiber orientation distributions on the tensile strength of short-fiber-reinforced polymers, Composites Science and Technology, 56(10), 1179–1190, https://doi.org/10.1016/S0266-3538(96)00072-3
  11. Gül, S. G. S., Aslan, B., ve Gürsel, A., (2025), Tekstil atıklarının kompozit malzemelerde takviye elemanı olarak kullanımı, AKU International Journal of Engineering Technology and Applied Sciences, 8(1), 33-40, https://doi.org/10.53448/akuumubd.1651963
  12. Herrera-Franco, P.J., and Valadez-González, A., (2005), A study of the mechanical properties of short natural-fiber reinforced composites, Composites Part B: Engineering, 36(8), 597-608, https://doi.org/10.1016/j.compositesb.2005.04.001
  13. Khonsari, A., Taghiyari, H. R., Karimi, A., and Tajvidi, M., (2015), Study on the effects of wood flour geometry on physical and mechanical properties of wood-plastic composites, Maderas. Ciencia y Tecnología, 17(3), 545-558, http://dx.doi.org/10.4067/S0718-221X2015005000049
  14. Ku, H., Wang, H., Pattarachaiyakoop, N., and Trada, M., (2011), A review on the tensile properties of natural fiber reinforced polymer composites, Composites Part B: Engineering, 42(4), 856-873, https://doi.org/10.1016/j.compositesb.2011.01.010
  15. Lahtela, V., and Kärki, T., (2021), The impact of textile waste on the features of high-density polyethylene (HDPE) composites, Urban Science, 5(3), 59, https://doi.org/10.3390/urbansci5030059
  16. Lei, Y., Wu, Q., Yao, F., and Xu, Y., (2007), Preparation and properties of recycled HDPE/natural fiber composites, Composites Part A: Applied Science and Manufacturing, 38(7), 1664-1674, https://doi.org/10.1016/j.compositesa.2007.02.001
  17. Liu, T., Lei, Y., Wang, Q., Lee, S., and Wu, Q., (2013), Effect of fiber type and coupling treatment on properties of high-density polyethylene/natural fiber composites, BioResources, 8(3), 4619-4632, https://doi.org/10.15376/biores.8.3.4619-4632
  18. Lu, J.J., and Hamouda, H., (2014), Current status of fiber waste recycling and its future, Advanced Materials Research, 878, 122–131, https://doi.org/10.4028/www.scientific.net/AMR.878.122
  19. Migneault, S., Koubaa, A., Erchiqui, F., Chaala, A., Englund, K., Krause, C., and Wolcott, M., (2008), Effect of fiber length on processing and properties of extruded wood-fiber/HDPE composites, Journal of Applied Polymer Science, 110(2), 1085-1092, https://doi.org/10.1002/app.28720
  20. Migneault, S., Koubaa, A., Erchiqui, F., Chaala, A., Englund, K., and Wolcott, M. P., (2009), Effects of processing method and fiber size on the structure and properties of wood-plastic composites, Composites Part A: Applied Science and Manufacturing, 40(1), 80-85, https://doi.org/10.1016/j.compositesa.2008.10.004
  21. Mulinari, D. R., Voorwald, H. J. C., Cioffi, M. O. H., and da Silva, M. L. C. P., (2017), Cellulose fiber-reinforced high-density polyethylene composites—Mechanical and thermal properties, Journal of Composite Materials, 51(13), 1807–1815, https://doi.org/10.1177/0021998316665241
  22. Patsiaoura, D., Tarani, E., Bikiaris, D. N., Pavlidou, E., and Chrissafis, K., (2024), Lignocellulosic-based/high density polyethylene composites: A comprehensive study on fiber characteristics and performance evaluation, Applied Sciences, 14(9), 3582, https://doi.org/10.3390/app14093582
  23. Sandin, G., and Peters, G. M., (2018), Environmental impact of textile reuse and recycling – A review, Journal of Cleaner Production, 184, 353–365, https://doi.org/10.1016/j.jclepro.2018.02.266
  24. Seculi, F., Espinach, F. X., Julián, F., Delgado-Aguilar, M., Mutjé, P., and Tarrés, Q., (2022), Evaluation of the strength of the interface for abaca fiber reinforced HDPE and BioPE composite materials, and its influence over tensile properties, Polymers, 14(24), 5412, https://doi.org/10.3390/polym14245412
  25. Sezgin, H., (2023), The effect of various textile wastes (human hair, denim and pantyhose) on the mechanical properties of composite materials, Tekstil ve Konfeksiyon, 33(1), 95-103, https://doi.org/10.32710/tekstilvekonfeksiyon.1099223
  26. Smith, P., McLauchlin, A., Franklin, T., Yan, P., Cunliffe, E., Hasell, T., Kurlin, V., Kerr, C., Attwood, J., Shaver, M. P., and McDonald, T. O., (2024), A data-driven analysis of HDPE post-consumer recyclate for sustainable bottle packaging, Resources, Conservation And Recycling, 205, 107538, https://doi.org/10.1016/j.resconrec.2024.107538
  27. Yang, H.-S., Kim, H.-J., Park, H.-J., Lee, B.-J., and Hwang, T.-S., (2006), Water absorption behavior and mechanical properties of lignocellulosic filler-polyolefin bio-composites, Composite Structures, 72(4), 429–437, https://doi.org/10.1016/j.compstruct.2005.01.013