SavedAdd your journal

Journals / Mobilya ve Ahşap Malzeme Araştırmaları Dergisi / 2025 / Cilt: 8 Sayı: 2

Effect of waste MDF powder on some physical and mechanical properties of blend of low density polyethylene and high density polyethylene

Alçak yoğunluklu polietilen ve yüksek yoğunluklu polietilen karışımının bazı fiziksel ve mekanik özellikleri üzerine atık MDF tozunun etkisi

Bekir Cihad Bal(Kahramanmaras Sütcü Imam University)0000-0001-7097-4132
Pages
321–333
Publication Date
2025-12-16
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

However, on the contrary, density, flexural modulus and tensile modulus increased.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Scientific studies on the use of industrial waste in the production of wood-plastic composites (WPCs) have increased in recent years.
📊
Key Findings & Data:The increased emphasis placed on recycling in some countries has increased this interest.
💡
Conclusion & Impact:However, on the contrary, density, flexural modulus and tensile modulus increased.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:OPK · Mekanik özellikler · MDF tozu

Abstract

Scientific studies on the use of industrial waste in the production of wood-plastic composites (WPCs) have increased in recent years. The increased emphasis placed on recycling in some countries has increased this interest. Studies on the reuse and economic recovery of industrial waste, particularly within the scope of the zero waste project launched in Turkey, are attracting significant interest. Based on this perspective, this study investigated the utilization of waste Medium Density Fiber board (MDF) dust generated in furniture factories as a filler in the production of wood-plastic composite materials. In the study, wood-plastic composite panels were successfully produced by adding 10%, 25%, and 40% MDF dust to a blend of recycled low-density polyethylene (R-LDPE) and virgin high-density polyethylene (V-HDPE). The blend of R-LDPE and V-HDPE polymers was made homogeneously in the extruder machine. Some physical and mechanical properties of the resulting composites were investigated. According to the obtained data, as the amount of filler in the composite increased, the flexural strength, deformation at bending, tensile strength, elongation at break, molding shrinkage, and coefficient of linear thermal expansion decreased. However, on the contrary, density, flexural modulus and tensile modulus increased.

Özet

Odun plastik kompozitlerin (OPK) üretilmesinde, endüstriyel atıkların kullanımı üzerine yapılan bilimsel çalışmalar son yıllarda artmıştır. Geri dönüşüm konusuna bazı ülkelerin daha fazla önem vermesi bu ilgiyi artırmıştır. Özellikle Türkiye’de başlatılan sıfır atık projesi kapsamında, endüstriyel atıkların yeniden değerlendirilmesi ve ekonomiye kazandırılması konusundaki çalışmalar ilgi çekmektedir. Bu noktadan hareketle, bu çalışmada, mobilya fabrikalarında oluşan atık orta yoğunluklu lif levha (MDF) tozunun dolgu maddesi olarak odun-plastik kompozit malzemelerin üretiminde kullanılabilirliği araştırılmıştır. Çalışmada, geri dönüştürülmüş alçak yoğunluklu polietilen (G-AYPE) ile yeni yüksek yoğunluklu polietilen (Y-YYPE) karışımına %10, %25 ve %40 oranlarında MDF tozu eklenerek odun plastik kompozit plakalar başarılı şekilde üretilmiştir. G-AYPE ile Y-YYPE polimerlerin karışımı extruder makinesinde homojen bir şekilde yapılmıştır. Elde edilen kompozitlerin bazı fiziksel ve mekanik özellikleri araştırılmıştır. Elde edilen verilere göre; kompozit içerisindeki dolgu maddesi oranı arttıkça, eğilme direnci, eğilmede deformasyon, çekme direnci, kopmada uzama, kalıplama daralması ve doğrusal termal genleşme katsayısı azalmıştır. Ancak, bunun aksine yoğunluk, eğilmede elastikiyet ve çekmede elastikiyet artmıştır.

🔖

Cite This Article

Bal, B. C. (2025). Effect of waste MDF powder on some physical and mechanical properties of blend of low density polyethylene and high density polyethylene. Mobilya ve Ahşap Malzeme Araştırmaları Dergisi, Cilt: 8 Sayı: 2, 321–333. https://doi.org/10.33725/mamad.1804675

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (39)

  1. Akdoğan, E., (2020). The effects of high density polyethylene addition to low density polyethylene polymer on mechanical, impact and physical properties, European Journal of Technique (EJT), 10(1), 25-37, DOI: 10.36222/ejt.646693
  2. Altuntaş, E., Salan, T., ve Alma, M. H., (2016). Farklı bor bileşik kullanılarak MDF-AYPE odun plastik kompozitlerin yangına dayanıklılığının araştırılması, Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 19(3), 19-23.
  3. Altuntas, E., Narlioglu, N., and Alma, M., (2017a). Investigation of the fire, thermal, and mechanical properties of zinc borate and synergic fire retardants on composites produced with PP-MDF wastes, BioResources, 12(4), 6971-6983. DOI: 10.15376/biores.12.4.6971-6983
  4. Altuntaş, E., Yılmaz, E., ve Salan, T., (2017b), Yüksek oranda lif dolgu maddesi kullanımının odun plastik kompozit malzemenin mekanik özellikleri üzerine etkisinin araştırılması, Turkish Journal of Forestry, 18(3), 258-263, DOI: 10.18182/tjf.308969
  5. ASTM D 638., (2004). Standard test method for tensile properties of plastics, ASTM International, West Conshohocken, PA. 1–24s.
  6. ASTM D 790., (2004). Flexural properties of unreinforced and reinforced plastics and electrical insulating materials, ASTM International, West Conshohocken, Philadelphia, PA. 1–9s.
  7. ASTM D 792 (2004) Standard test method for density and specific gravity (relative density) of plastics by displacement, Annual Book of American Society for Testing and Materials (ASTM) Standards, Philadelphia, West Conshohocken, PA 19428-2959. United States.
  8. ASTM D4703-16 (2016) Compression molding thermoplastic materials into test specimens, plaques, or sheets, Annual Book of American Society for Testing and Materials (ASTM) Standards, Philadelphia, West Conshohocken, PA 19428-2959. United States.
  9. Ayrilmis, N., Kuzmin, A. M., Masri, T., Yagoub, M., Sedira, L., Pantyukhov, P., and Al-Farraj, S. A. (2025). Effects of reinforcement by both waste glass and barley straw on water resistance, mechanical, and thermal properties of polyethylene composite, BioResources, 20(3), 5967–5987, DOI: 10.15376/biores.20.3.5967-5987
  10. Avella M., Avolio, R., Bonadies, I., Carfagna C., Errico M.E., and Gentile G., (2009) Recycled multilayer cartons as cellulose source in HDPE‐based composites: Compatibilization and structure‐properties relationships. Journal of Applied Polymer Science, 114(5): 2978-2985, DOI: 10.1002/app.30913
  11. Bal, B. C. (2023a). Some mechanical properties of WPCs with wood flour and walnut shell flour, Polímeros, 33(2), e20230020, 1-8, DOI: 10.1590/0104-1428.20230005
  12. Bal, B. C. (2023b). Comparative study of some properties of wood plastic composite materials produced with polyethylene, wood flour, and glass flour. Furniture and Wooden Material Research Journal, 6(1), 70-79. DOI: 10.33725/mamad.1301384
  13. Bal, B. C., Altuntaş, E., and Narlıoğlu, N. (2023). Some selected properties of composite material produced from plastic furniture waste and wood flour, Furniture and Wooden Material Research Journal, 6(2), 233-244. DOI: 10.33725/mamad.1384214
  14. Bal, B. C., and Narlioğlu, N., (2024). Physical and mechanical properties of composites produced from recycled polypropylene and cardboard-polyethylene-aluminium mixture. Tribology and Materials, 3(4), 163-171, DOI: 10.46793/tribomat.2024.018
  15. Bhaskar, K. B., Devaraju, A., and Paramasivam, A., (2021). Experimental investigation of glass powder reinforced polymer composite. Materials Today: Proceedings, 39, 484-487, DOI: 10.1016/j.matpr.2020.08.211
  16. Birinci, E., and Kaymakci, A., (2023). Effect of processing technology, nanomaterial and coupling agent ratio on some physical, mechanical, and thermal properties of wood polymer nanocomposites, Forests, 14(5), 1036, DOI: 10.3390/f14051036
  17. Bouafif, H., Koubaa, A., Perré, P., and Cloutier, A., (2009). Effects of fiber characteristics on the physical and mechanical properties of wood plastic composites, Composites Part A: Applied Science and Manufacturing, 40(12), 1975-1981, DOI: 10.1016/j.compositesa.2009.06.003
  18. Chavooshi, A., and Madhoushi, M., (2013). Mechanical and physical properties of aluminum powder/MDF dust/polypropylene composites, Construction and Building Materials, 44, 214-220, DOI: 10.1016/j.conbuildmat.2013.02.079
  19. Chavooshi, A., Madhoushi, M., Shakeri, A., and Khazaeian, A., (2014). A comparative study on the effects of material blending method on the physico‐mechanical properties of WPCs made from MDF dust, Journal of Applied Polymer Science, 131(15), DOI: 10.1002/app.40513
  20. Çavus, V., (2020), Selected properties of mahogany wood flour filled polypropylene composites: The effect of maleic anhydride-grafted polypropylene (MAPP), BioResources 15(2), 2227-2236, DOI: 10.15376/biores.15.2.2227-2236
  21. Ebadi M, Farsi M, Narchin P, and Madhoushi, M., (2016). The effect of beverage storage packets (Tetra Pak™) waste on mechanical properties of wood–plastic composites, Journal of Thermoplastic Composite Materials 29(12): 1601-1610. DOI: 10.1177/0892705715618745
  22. Ebadi M, Farsi M, and Narchin P., (2017). Some of the physical and mechanical properties of composites made from Tetra Pak™/LDPE, Journal of Thermoplastic Composite Materials 31(8), 1054-1065.DOI: 10.1177/0892705717734597
  23. Fiore, V., Botta, L., Scaffaro, R., Valenza, A., and Pirrotta, A. (2014), PLA based biocomposites reinforced with Arundo donax fillers, Composites Science and Technology, 105, 110-117, DOI: 10.1016/j.compscitech.2014.10.005
  24. Güler, C., ve Doğan, V., (2022). MDF üretiminde zımpara tozu kullanım olanaklarının araştırılması, Mobilya ve Ahşap Malzeme Araştırmaları Dergisi, 5(1), 1-7, DOI: 10.33725/mamad.1114080
  25. Hamouda T, Hassanin AH, Saba N, Demirelli M, Kilic A, Candan Z, and Jawaid, M., (2019). Evaluation of mechanical and physical properties of hybrid composites from food packaging and textiles wastes, Journal of Polymers and the Environment, 27, 489-497.DOI: 10.1007/s10924-019-01369-3
  26. Huang, R., Xiong, W., Xu, X., and Wu, Q., (2012). Thermal expansion behavior of co-extruded wood-plastic composites with glass-fiber reinforced shells, BioResources, 7(4), 5514-5526.
  27. Kuzmin, A., Ashori, A., Pantyukhov, P., Zhou, Y., Guan, L., and Hu, C. (2024). Mechanical, thermal, and water absorption properties of HDPE/barley straw composites incorporating waste rubber, Scientific Reports, 14(1), 25232. DOI: 10.1038/s41598-024-76337-6
  28. Matuana, L. M., Stark, N. M., (2015). The use of wood fibers as reinforcements in composites, in: Biofiber Reinforcements in Composite Materials, Woodhead Publishing, Swaston, UK, pp. 648-688, DOI: 10.1533/9781782421276.5.648
  29. Mengeloglu, F., Basboga, İ. H., and Aslan, T. (2015). Selected properties of furniture plant waste filled thermoplastic composites, Pro Ligno, 11(4), 199-206.
  30. Mohareb AS, Hassanin AH, Candelier K, Thévenon MF, and Candan Z., (2017) Developing biocomposites panels from food packaging and textiles wastes: physical and biological performance. Journal of Polymers and the Environment, 25, 126-135, DOI: 10.1007/s10924-016-0791-6
  31. Mussa, H. M., and Salih, T. W. M., (2021). Experimental investigation on thermal properties of wood-plastic composites as flat panels, Journal of Engineering Research, 9 (ICRIE- Special Issue), 1-16
  32. Özmen, N., Çetin, N. S., Narlıoğlu, N., Çavuş, V., veAltuntaş, E. (2014). MDF atıklarının odun plastik kompozitlerin üretiminde değerlendirilmesi. SDÜ Orman Fakültesi Dergisi, 15, 65-71. DOI: 10.18182/tjf.64025
  33. Rosa, S. M. L., Santos, E. F., Ferreira, C. A., and Nachtigall, S. M. B., (2009). Studies on the properties of rice-husk-filled-PP composites: effect of maleated PP, Materials Research, 12, 333-338. DOI: 10.1590/S1516-14392009000300014
  34. Revilla‐Díaz, R., Sánchez‐Valdés, S., López‐Campos, F., Medellín‐Rodríguez, F. J., and López‐Quintanilla, M. L. (2007). Comparative characterization of PP nano‐and microcomposites by in‐mold shrinkage measurements and structural characteristics, Macromolecular Materials and Engineering, 292(6), 762-768
  35. Sadik, W. A., El-Demerdash, A. G. M., Abokhateeb, A. E., and Elessawy, N. A., (2021), Innovative high-density polyethylene/waste glass powder composite with remarkable mechanical, thermal and recyclable properties for technical applications, Heliyon, 7(4). e06627, DOI: 10.1016/j.heliyon.2021.e06627
  36. Stark, N., and Berger, M. J., (1997). Effect of species and particle size on properties of wood-flour-filled polypropylene composites, Proceeding of functional fillers for thermoplastic and thermosets. December, 8-10.
  37. Taşdemir, M. (2020). Yüksek yoğunluklu polietilen (HDPE)/atık üre formaldehit polimer karışımlarının mekanik özellikleri, International Periodical of Recent Technologies in Applied Engineering, 2(2), 51-55.
  38. Tufan, M., Güleç, T., Çukur, U., Akbaş, S., ve İmamoğlu, S., (2015). Atık bardaklardan üretilen odun plastik kompozitlerin bazı özellikleri, Kastamonu University Journal of Forestry Faculty, 15(2), 176-182.DOI: 10.17475/kuofd.76245
  39. Yazıcıoğlu O., Borat, O. (2018). İmalat Yöntemleri, Seçkin Yayınevi, Ankara.