Journals / Mobilya ve Ahşap Malzeme Araştırmaları Dergisi / 2026 / Cilt: 9 Sayı: 1

Experimental and numerical analysis of PVC foam core sandwich panels subjected to bending

Eğilmeye maruz bırakılmış PVC köpük çekirdekli sandviç levhaların deneysel ve sayısal analizi

Ergün Güntekin(BURSA TEKNİK ÜNİVERSİTESİ)0000-0002-8423-6664
Pages
103–114
Publication Date
2026-06-30
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results of the study demonstrate that numerical models can be used to accurately predict the bending behavior of sandwich panels up to fracture using the yield stress and tangent modulus (plastic region) of the materials.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, sandwich panels created using PVC foam core and plywood/ MDF surfaces subjected to bending were analyzed using experimental and numerical methods.
📊
Key Findings & Data:The sandwich panels used PVC foam with a density of 60 kg/m³ as the core and beech plywood and MDF as the surface materials.
💡
Conclusion & Impact:The results of the study demonstrate that numerical models can be used to accurately predict the bending behavior of sandwich panels up to fracture using the yield stress and tangent modulus (plastic region) of the materials.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:MDF · Kontrplak · PVC köpük sandviç

Abstract

In this study, sandwich panels created using PVC foam core and plywood/ MDF surfaces subjected to bending were analyzed using experimental and numerical methods. The sandwich panels used PVC foam with a density of 60 kg/m³ as the core and beech plywood and MDF as the surface materials. The sandwich layers were bonded using a two-component epoxy adhesive. The bending properties of the plywood and MDF materials used in the study were determined and used in numerical modeling. The manufacturer's specified E value was used for the PVC foam. The results of the study showed that the type of surface material significantly affects the bending behavior of PVC foam core sandwich panels When plywood surfaces are used, PVC foam core sandwich panels have been found to have higher bending rigidity and strength. In the tested sandwich panels, the dominant failure type was fracture of the surface material. In MDF surfaces, wrinkling on the top surface and MDF/core fracture were observed. The results of the study demonstrate that numerical models can be used to accurately predict the bending behavior of sandwich panels up to fracture using the yield stress and tangent modulus (plastic region) of the materials.

Özet

Bu çalışmada, eğilmeye maruz bırakılan PVC köpük çekirdek ve kontrplak/MDF yüzeyler kullanılarak oluşturulan sandviç levhalar, deneysel ve sayısal yöntemler kullanılarak analiz edilmiştir. Sandviç levhalarda çekirdek olarak 60 kg/m3 yoğunlukta PVC köpük, yüzey malzemeleri olarak kayın kontrplak ve MDF kullanılmıştır. Sandviç katmanları çift bileşenli epoksi yapıştırıcı kullanılarak yapıştırılmıştır. Çalışmada kullanılan kontrplak ve MDF malzemelerin eğilme özellikleri belirlenerek sayısal modellemede kullanılmıştır. PVC köpük için üretici tarafından belirtilen elastikiyet değeri kullanılmıştır. Çalışmanın sonuçları, yüzey malzeme türünün PVC köpük çekirdekli sandviç levhaların eğilme davranışını önemli ölçüde etkilediğini göstermiştir. Kontrplak yüzeyler kullanıldığında, PVC köpük çekirdekli sandviç levhaların eğilmeye rijitliğinin ve dayanımının daha yüksek olduğu bulunmuştur. Test edilen sandviç levhalarda, baskın arıza türü yüzey malzemesinin kırılmasıdır. MDF yüzeylerde üst yüzeyde kırışma ve MDF/çekirdek kırılması gözlemlenmiştir. Çalışmanın sonuçları, sayısal modellerin, malzemelerin akma gerilmesi ve teğet modülü (plastik bölge) kullanılarak sandviç levhaların kırılmaya kadar olan eğilme davranışını doğru bir şekilde tahmin etmek için kullanılabileceğini göstermektedir.

🔖

Cite This Article

Güntekin, E. (2026). Experimental and numerical analysis of PVC foam core sandwich panels subjected to bending. Mobilya ve Ahşap Malzeme Araştırmaları Dergisi, Cilt: 9 Sayı: 1, 103–114. https://doi.org/10.33725/mamad.1917335

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (34)

  1. Al, G., Aydemir, D. ve Bakır, K., (2024), Poliüretan köpük esaslı kavak kompozit panellerin fiziksel ve mekanik özellikleri, Bartın Orman Fakültesi Dergisi, 26(2), 98 – 106, https://doi.org/10.24011/barofd.1357963
  2. Alade, A. A. and Ibrahim, A., (2023), Application of finite element method for mechanical characterization of wood and reconstituted lignocellulosic-based composites – A review. Recent Progress in Materials, 5 (1), 1-24, https://doi.org/10.21926/rpm.2301003
  3. ASTM C393/C393M – 11, (2011), Standard test method for core shear properties of sandwich constructions by beam flexure, ASTM International, West Conshohocken, PA, USA.
  4. ASTM D7250 / D7250M-20, (2020), Standard practice for determining sandwich beam flexural and shear stiffness, ASTM International, West Conshohocken, PA, USA.
  5. Ayrılmış, N., Ulay, G., Bağlı, E. F., ve Özkan, İ. (2015), Ahşap sandviç kompozit levhaların yapısı ve mobilya endüstrisinde kullanımı, Kastamonu University Journal of Forestry Faculty, 15(1), 37-48, https://doi.org/10.17475/kuofd.75615
  6. Birman, V. and Kardomateas, G. A., (2018), Review of current trends in research and applications of sandwich structures, Composite Part B, 142: 221-240, https://doi.org/10.1016/j.compositesb.2018.01.027
  7. Edgars, L., Kaspars, Z. and Kaspars, K., (2017), Structural performance of wood based sandwich panels in four-point bending, Procedia Engineering, 172: 628 – 633, https://doi.org/10.1016/j.proeng.2017.02.073
  8. Fang, H., Sun, H., Liu, W., Wang, L., Bai, Y. and Hui, D., (2015). Mechanical performance of innovative GFRP-bamboo-wood sandwich beams: Experimental and modelling investigation, Composite Part B, 79, 182-196, https://doi.org/10.1016/j.compositesb.2015. 04.035
  9. Goodman, J.R. and Bodig, J., (1971), Orthotropic strength of wood in compression. Wood Science, 4, 83-94. Gozdecki, C. and Kociszewski, M., (2021), The properties of sandwich panels made of standard wood-based panels, Ann. WULS - SGGW, Forestry and Wood Technology, 114, 125-130.
  10. Güler, C. ve Ulay, G., (2010), Köpüklü kompozit (sandviç) levhaların bazı teknolojik özellikleri, Süleyman Demirel Üniversitesi Orman Fakültesi Dergisi, A(2), 88-96.
  11. Güntekin, E. and Uysal, M., (2025). Experimental and numerical analysis of sandwich panels made of different core materials with plywood facing, Drvna Industrija, 76 (1), 47-55, https://doi.org/10.5552/drvind.2025.0201
  12. Güntekin, E. ve Uysal, M., (2024), Doğu kayını (Fagus orientalis L.) kontrplak ile güçlendirilmiş yongalevha ve liflevhanın eğilme davranışının deneysel ve nümerik analizi. Mobilya ve Ahşap Malzeme Araştırmaları Dergisi, 7(1), 26-37, https://doi.org/10.33725/mamad.1464366 Hao, J., Wu, X., Oporto, G., Wang, J., Dahle, G. and Nan, N., (2018), Deformation and failure behavior of wooden sandwich composites with Taiji honeycomb core under a three-point bending test, Materials, 11: 2325, https://doi.org/10.3390/ma11112325
  13. Kawasaki, T. and Kawai. S., (2006), Thermal insulation properties of wood-based sandwich panel for use as structural insulated walls and floors, Journal of Wood Science, 52, 75-83.
  14. Klímek, P., Wimmer, R., Brabec, M. and Sebera, V., (2016), Novel sandwich panel with interlocking plywood kagome lattice core and grooved particleboard facings, BioResources, 11(1), 195-208, https://doi.org/10.15376/biores.11.1.195-208
  15. Kljak, J. and Brezović, M., (2007), Influence of plywood structure on sandwich panel properties: Variability of veneer thickness ratio, Wood research, 52(2), 77-88.
  16. Köhler, R., Jurisch, M., Mayer, A. K., Mai, C. and Viöl, W., (2022), Loofah sandwich panels: The effect of adhesive content on mechanical and physical properties, Materials, 15, 7129, https://doi.org/10.3390/ma15207129
  17. Labans, E. and Kalnins, K, (2014), Experimental validation of the stiffness optimization for plywood sandwich panels with rib-stiffened core, Wood Research, 59(5), 793-802.
  18. Lakreb, N., Bezzazi, B. and Pereira, H., (2015), Mechanical behavior of multilayered sandwich panels of wood veneer and a core of cork agglomerates, Materials & Design, 65, 627-636, https://doi.org/10.1016/j.matdes.2014.09.059
  19. Mohammadabadi, M., Yadamab, V. and Smith, L., (2019), An analytical model for wood composite sandwich beams with a biaxial corrugated core under bending, Composite Structures 228, 111316, https://doi.org/10.1016/j.compstruct.2019.111316
  20. Mohammadabadi, M., Jarvis, J., Yadama, V. and Cofer, W., (2020), Predictive models for elastic bending behavior of a wood composite sandwich panel, Forests, 11(624), 16, https://doi.org/10.3390/f11060624
  21. Nemli, G. ve Çolakoğlu G., (2005), The influence of lamination technique on the properties of particleboard, Building and Environment, 40(1), 83-87.
  22. Noor, A. K., Burton, W. S. and Bert, C. W. (1996), Computational models for sandwich panels and shells, ASME Applied Mechanics Reviews, 49(3), 155–199.
  23. Sandeep, S.H. and Srinivasa, C.V., (2020), Hybrid sandwich panels: A Review. Int. J. of Applied Mechanics and Engineering, 25(3), 64-85.
  24. Schneider, C., Zenkert, D., Deshpande, V. S. and Kazemahvazi, S., (2016), Bending energy absorption of self-reinforced poly(ethylene terephthalate) composite sandwich beams, Composite Structures, 140, 582-589, https://doi.org/10.1016/j.compstruct.2015.12.043
  25. Smardzewski, J., (2019a), Experimental and numerical analysis of wooden sandwich panels with an auxetic core and oval cells, Materials & Design, 183, 108159, https://doi.org/10.1016/j.matdes.2019.108159
  26. Smardzewski, J., (2019b), Wooden sandwich panels with prismatic core – Energy absorbing capabilities, Composite Structures, 230, 111535, https://doi.org/10.1016/j.compstruct. 2019.111535
  27. Smardzewski, J. and Wojciechowski, K.W. (2023), Study on the bending and failure behavior of wooden sandwich panels with corrugated core, randomized gaps, and wood defects, Construction and Building Materials, 409:133924, https://doi.org/10.1016/j.conbuildmat. 2023.133924
  28. Susainathan, J., Eyma F., De Luycker E., Cantarel A. and Castanie B., (2018), Experimental investigation of impact behavior of wood-based sandwich structures, Composites Part A: Applied Science and Manufacturing, 109, 10-19, https://doi.org/10.1016/j.compositesa. 2018.02.029
  29. TS EN 310, (1999), Ahşap esaslı levhalar-Eğilme dayanımı ve eğilme elastikiyet modülünün tayini, TSE, Ankara, 1999.
  30. TS EN 322, (1999), Ahşap esaslı levhalar-Rutubet miktarının tayini, TSE, Ankara, 1999.
  31. TS EN 323, (1999), Ahşap esaslı levhalar-Birim hacim ağırlığının tayini, TSE, Ankara, 1999.
  32. Uysal, M., Eren, O., Karatay, H. ve Memis, D., (2022), Uludağ göknarı ve karaçam odunlarından elde edilen çapraz lamine kerestelerinin eğilme özeliklerinin incelenmesi, Türkiye Ormancılık Dergisi, 23(4), 313-319, https://doi.org/10.18182/tjf.1166361
  33. Wei, P., Chen, J., Zhang, Y. and Pu, L., (2021), Wood-based sandwich Panels: A review, Wood Research, 66(5), 875-890, https://doi.org/10.37763/wr.1336-4561/66.5.875890
  34. Zniker, H., Feddal, I., Ouaki, B. and Bouzakraoui, S., (2023), Experimental and numerical investigation of mechanical behavior and failure mechanisms of PVC foam sandwich and GRP laminated composites under three-point bending loading, Journal of Failure Analysis and Prevention, 23, 66–78, https://doi.org/10.1007/s11668-023-01596-w