Journals / Ağaç ve Orman / 2025 / Cilt: 6 Sayı: 2

Effect of Boiling and Pressing Time on Some Mechanical Properties of Densified Poplar Wood (I-214 Populus × euramericana)

Kaynatma ve Presleme Süresinin Yoğunlaştırılmış Kavak (I-214 Populus × euramericana) Odununun Bazı Mekanik Özellikleri Üzerine Etkisi

Ayberk Aydoğmuş(İZMİR KATİP ÇELEBİ ÜNİVERSİTESİ)0000-0002-6942-1730
Anıl Taniş(İZMİR KATİP ÇELEBİ ÜNİVERSİTESİ, ORMAN FAKÜLTESİ, ORMAN ENDÜSTRİSİ MÜHENDİSLİĞİ BÖLÜMÜ)0009-0007-3164-2064
Amil Volkan Yildizhan(İZMİR KATİP ÇELEBİ ÜNİVERSİTESİ, ORMAN FAKÜLTESİ, ORMAN ENDÜSTRİSİ MÜHENDİSLİĞİ BÖLÜMÜ)0009-0008-7295-2314
Arif Çağlar Konukçu(İZMİR KATİP ÇELEBİ ÜNİVERSİTESİ, ORMAN FAKÜLTESİ, ORMAN ENDÜSTRİSİ MÜHENDİSLİĞİ BÖLÜMÜ)0000-0002-7955-7172
Pages
107–114
Publication Date
2025-12-17
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The findings indicate that the increase in density resulting from the densification process enhances the mechanical properties of poplar wood.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the changes in the mechanical properties (flexural strength (MOR), modulus of elasticity (MOE), and Brinell hardness) of poplar wood (I-214 Populus × euramericana), a species naturally distributed in Türkiye, were investigated following thermo-mechanical densification under two different boiling times (30 and 60 minutes), two different pressing times (30 and 60 minutes), and two different compression ratios (20% and 40%).
📊
Key Findings & Data:Regardless of the boiling and pressing times, it was determined that there was no significant difference in MOE, MOR, and Brinell hardness values after 20% compression compared to the control samples, but when the compression ratio was increased to 40% of the sample thickness, it was determined that significant increases in mechanical properties occurred compared to the control samples.
💡
Conclusion & Impact:The findings indicate that the increase in density resulting from the densification process enhances the mechanical properties of poplar wood.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Kavak · kaynatma · Termo-mekanik yoğunlaştırma

Abstract

In this study, the changes in the mechanical properties (flexural strength (MOR), modulus of elasticity (MOE), and Brinell hardness) of poplar wood (I-214 Populus × euramericana), a species naturally distributed in Türkiye, were investigated following thermo-mechanical densification under two different boiling times (30 and 60 minutes), two different pressing times (30 and 60 minutes), and two different compression ratios (20% and 40%). Regardless of the boiling and pressing times, it was determined that there was no significant difference in MOE, MOR, and Brinell hardness values after 20% compression compared to the control samples, but when the compression ratio was increased to 40% of the sample thickness, it was determined that significant increases in mechanical properties occurred compared to the control samples. According to the obtained results, poplar wood densified by boiling for 60 minutes and subsequently pressing for 60 minutes to achieve a 40% compression ratio exhibited a 59% increase in MOE compared to the control samples. Furthermore, under the same conditions (60 minutes of boiling, 60 minutes of pressing, and 40% compression), the densified poplar wood showed increases of 54% and 330% in MOR and Brinell hardness values, respectively, relative to the control samples. The findings indicate that the increase in density resulting from the densification process enhances the mechanical properties of poplar wood. This suggests that poplar wood has the potential to be used as an alternative material to other commonly utilized wood species in the furniture and construction industries.

Özet

Bu çalışmada, ülkemizde doğal yayılış gösteren kavak (I-214 Populus × euramericana) odununun, iki farklı kaynatma süresi (30 ve 60 dakika), iki farklı pres süresi (30 ve 60 dakika) ve iki farklı sıkıştırma oranı (%20 ve %40) ile termo-mekanik yoğunlaştırma işlemine tabi tutulması sonrasında mekanik özelliklerinde (eğilme direnci (MOR), elastikiyet modülü (MOE) ve Brinell sertlik) meydana gelen değişim incelenmiştir. Kaynatma ve pres sürelerinden bağımsız olarak %20 sıkıştırma sonrası MOE, MOR ve Brinell sertlik değerlerinde kontrol örneklerine kıyasla önemli bir fark olmadığı tespit edilirken, sıkıştırma oranı örnek kalınlığının %40’ına çıkarıldığında, mekanik özelliklerde kontrol örneklerine kıyasla önemli artışların meydana geldiği belirlenmiştir. Elde edilen sonuçlara göre 60 dakika kaynatma ön işlemi sonrasında 60 dakika preslenerek %40 oranında yoğunlaştırılan kavak odununun kontrol örneklerine kıyasla MOE değerinde %59 oranında artış olduğu belirlenmiştir. Ayrıca, yine aynı parametrelerde (60 dakika kaynatma, 60 dakika pres ve %40 sıkıştırma oranı) yoğunlaştırılan kavak odununda MOR ve Brinell sertlik değerlerinin de kontrol örneklerine kıyasla sırasıyla %54 ve %330 oranında artışın meydana geldiği tespit edilmiştir. Elde edilen bulgular, yoğunlaştırma işlemiyle birlikte artan yoğunluğun kavak odununun mekanik özelliklerini iyileştirdiğini göstermektedir. Bu durum, kavak odununun mobilya ve yapı endüstrilerinde yaygın olarak kullanılan diğer ağaç türlerine alternatif bir malzeme olarak kullanılabilme potansiyelini ortaya koymaktadır.

🔖

Cite This Article

Aydoğmuş, A., Taniş, A., Yildizhan, A. V., Konukçu, A. Ç. (2025). Effect of Boiling and Pressing Time on Some Mechanical Properties of Densified Poplar Wood (I-214 Populus × euramericana). Ağaç ve Orman, Cilt: 6 Sayı: 2, 107–114. https://doi.org/10.59751/agacorman.1759405

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (25)

  1. Blomberg, J., Persson, B., & Blomberg, A. (2005). Effects of semi-isostatic densification of wood on the variation in strength properties with density. Wood Science and Technology, 39(5), 339–350.
  2. Cabral, J. P., Kafle, B., Subhani, M., Reiner, J., & Ashraf, M. (2022). Densification of timber: a review on the process, material properties, and application. Journal of Wood Science, Springer Singapore, 68(1), 1–25.
  3. Damlayıcı, Ö., & Arslan, İ. K. (2024). Dünya ve Türkiye ekonomisinde mobilya sektörü. Mecmua, (17), 81–91.
  4. Gasson, P., Baas, P., & Wheeler, E. (2011). Wood anatomy of CITES-listed tree species. IAWA Journal, 32(2), 155–198.
  5. Haines, D. W., Leban, J. M., & Herbé, C. (1996). Determination of Young’s modulus for spruce, fir and isotropic materials by the resonance flexure method with comparisons to static flexure and other dynamic methods. Wood Science and Technology, 30(4), 253–263.
  6. Kollman, F. F. P., & Côté, W. A. (1968). Principles of wood science and technology: I solid wood, principles of wood science and technology, Springer – Verlag.
  7. Kutnar, A., Kamke, F. A., & Sernek, M. (2009). Density profile and morphology of viscoelastic thermal compressed wood. Wood Science and Technology, 43(1–2), 57–68.
  8. Lei, Y. C., Zhang, S. Y., & Jiang, Z. (2005). Models for predicting lumber bending MOR and MOE based on tree and stand characteristics in black spruce. Wood Science and Technology, 39(1), 37–47.
  9. Li, H., Jiang, X., Ramaswamy, H. S., Zhu, S., & Yu, Y. (2018). High-pressure treatment effects on density profile, surface roughness, hardness, and abrasion resistance of paulownia wood boards. Transactions of the ASABE, 61(3), 1181–1188.
  10. Li, S. N., Zhang, Y. M., Yu, Y. L., Yu, W. J. (2021). Effect of boiling treatment on physical and mechanical properties of moso bamboo. Chinese Journal of Wood Science and Technology, 35(3), 59–64.
  11. Özkan, U., Aykanat, O., & Ermeydan, A. (2020). Yoğunlaştırılmış çam ve kavak ahşabının fiziksel ve mekanik özelliklerinin kayın ahşabı ile karşılaştırılması. Ağaç ve Orman, 1(2), 13–19.
  12. Pelit, H., & Yorulmaz, R. (2019). Influence of densification on mechanical properties of thermally pretreated spruce and poplar wood. BioResources, 14(4), 9739–9754.
  13. Pelit, H., Sönmez, A., & Budakçi, M. (2015). Effects of thermomechanical densification and heat treatment on density and Brinell hardness of scots pine (Pinus sylvestris L.) and Eastern beech (Fagus orientalis L.). BioResources, 10(2), 3097–3111.
  14. Saranpää P. (2003). Wood density and growth. In J. R. Barnett, & G. Jeronimidis (Eds.), Wood quality and its biological basis (pp. 87–117). Blackwell Publishing Ltd, CRC Press.
  15. Smith, M. J., Benítez-Díaz, H., Clemente-Muñoz, M. Á., Donaldson, J., Hutton, J. M., Noel McGough, H., Medellin, R. A., Morgan, D. H. W., O’Criodain, C., Oldfield, T. E. E., Schippmann, U., & Williams, R. J. (2011). Assessing the impacts of international trade on CITES-listed species: Current practices and opportunities for scientific research. Biological Conservation, 144(1), 82–91.
  16. Somadona, S., Sribudiani, E., & Rahmawati, A. (2019). The physical properties of densified Terentang wood (Campnosperma auriculatum (blume) hook. f) on various steaming and pressing time. IOP Conference Series: Earth and Environmental Science, 374(1), 1–7.
  17. Sribudiani, E., Somadona, S., & Manalu, G. P. (2019). The physical properties of densified Terentang wood (Campnosperma auriculatum (blume) hook. f) on various boiling and pressing time. IOP Conference Series: Earth and Environmental Science, 374(1), 1–7.
  18. TS ISO 13061-12. (2014). Physical and mechanical properties of wood – Test methods for small clear wood specimens – Part 12: Determination of static hardness. International Organization for Standardization.
  19. TS ISO 13061-3. (2014). Physical and mechanical properties of wood – Test methods for small clear wood specimens – Part 3: Determination of ultimate strength in static bending. International Organization for Standardization.
  20. TS ISO 3129. (2019). Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens. International Organization for Standardization.
  21. Ülker, O., Imirzi, O., & Burdurlu, E. (2012). The effect of densification temperature on some physical and mechanical properties of scots pine (Pinus sylvestris), BioResources, 7(4), 5581–5592.
  22. Varga, D., & Van Der Zee, M. E. (2008). Einfluss der dämpfung auf verschiedene eigenschaften von vier laubholzarten. Holz als Roh - und Werkstoff, 66(1), 11–18.
  23. Verkasalo, E., & Leban, J. M. (2002). MOE and MOR in static bending of small clear specimens of Scots pine, Norway spruce and European fir from Finland and France and their prediction for the comparison of wood quality. Paperi ja Puu/Paper and Timber, 84(5), 332–340.
  24. Xu, B. H., Wang, T. T., Yu, K. Bin, Zhao, Y. H., & Zhang, B. (2023). Physical and mechanical properties of densified poplar by partial delignification. Wood Material Science and Engineering, 18(4), 1285–1290.
  25. Xu, B. H., Yu, K. Bin, Wu, H. C., & Bouchaïr, A. (2022). Mechanical properties and engineering application potential of the densified poplar. Wood Material Science and Engineering, Taylor & Francis, 17(6), 659–667.