SavedAdd your journal

Journals / Black Sea Journal of Engineering and Science / 2026 / Cilt: 9 Sayı: 3

Numerical Investigation of Natural and Forced Convection Effects on the Thermal Performance of a Finned Heat Sink inside a Rectangular Duct

Bekir Doğan(TOKAT GAZİOSMANPAŞA ÜNİVERSİTESİ, TOKAT MESLEK YÜKSEKOKULU, MAKİNE VE METAL TEKNOLOJİLERİ BÖLÜMÜ)0000-0002-8986-7174
Pages
1101–1110
Publication Date
2026-05-15
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results show that natural convection leads to weak airflow and localized heat accumulation, resulting in the highest heat sink temperatures.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Efficient thermal management is essential for electronic systems operating under high power densities and confined conditions.
📊
Key Findings & Data:The effects of heat dissipation rate (100–150 W) and inlet air temperature (25–50 °C) on thermal performance are systematically analyzed.
💡
Conclusion & Impact:The results show that natural convection leads to weak airflow and localized heat accumulation, resulting in the highest heat sink temperatures.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Computational fluid dynamics · Electronic cooling · Finned heat sink

Abstract

Efficient thermal management is essential for electronic systems operating under high power densities and confined conditions. This study presents a three-dimensional numerical investigation of a finned heat sink mounted inside a rectangular duct under different convection modes and operating parameters. Natural and forced convection are examined together with laminar and turbulent flow regimes. The effects of heat dissipation rate (100–150 W) and inlet air temperature (25–50 °C) on thermal performance are systematically analyzed. The steady-state governing equations of mass, momentum, and energy are solved using the finite volume method, with turbulence modeled by the k–ω SST model. Flow structures and temperature fields are evaluated, and maximum and volume-averaged heat sink temperatures are used as performance indicators. The results show that natural convection leads to weak airflow and localized heat accumulation, resulting in the highest heat sink temperatures. Forced convection significantly improves cooling performance, while turbulent flow provides the lowest temperatures and the most uniform thermal distribution. Increasing heat dissipation rate raises heat sink temperature in all cases, whereas higher inlet air temperature degrades cooling effectiveness. Overall, forced turbulent convection is identified as the most effective cooling strategy for duct-based air-cooled electronic systems.

Özet

Efficient thermal management is essential for electronic systems operating under high power densities and confined conditions. This study presents a three-dimensional numerical investigation of a finned heat sink mounted inside a rectangular duct under different convection modes and operating parameters. Natural and forced convection are examined together with laminar and turbulent flow regimes. The effects of heat dissipation rate (100–150 W) and inlet air temperature (25–50 °C) on thermal performance are systematically analyzed. The steady-state governing equations of mass, momentum, and energy are solved using the finite volume method, with turbulence modeled by the k–ω SST model. Flow structures and temperature fields are evaluated, and maximum and volume-averaged heat sink temperatures are used as performance indicators. The results show that natural convection leads to weak airflow and localized heat accumulation, resulting in the highest heat sink temperatures. Forced convection significantly improves cooling performance, while turbulent flow provides the lowest temperatures and the most uniform thermal distribution. Increasing heat dissipation rate raises heat sink temperature in all cases, whereas higher inlet air temperature degrades cooling effectiveness. Overall, forced turbulent convection is identified as the most effective cooling strategy for duct-based air-cooled electronic systems.

🔖

Cite This Article

Doğan, B. (2026). Numerical Investigation of Natural and Forced Convection Effects on the Thermal Performance of a Finned Heat Sink inside a Rectangular Duct. Black Sea Journal of Engineering and Science, Cilt: 9 Sayı: 3, 1101–1110. https://doi.org/10.34248/bsengineering.1883247

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (17)

  1. Amer, M., & Abbas, N. (2025). Advancements in electronics cooling techniques: focus on graphene’s prospects, challenges, and future directions. Journal of Thermal Analysis and Calorimetry, 150(4), 2407-2457.
  2. Dogan, B. (2026). Numerical investigation of conjugate heat transfer in circular pipes considering wall thickness, material conductivity, and external convection. Results in Engineering, 29, 109236.
  3. Freegah, B., Hussain, A. A., Falih, A. H., & Towsyfyan, H. (2020). CFD analysis of heat transfer enhancement in plate-fin heat sinks with fillet profile: Investigation of new designs. Thermal Science and Engineering Progress, 17, 100458.
  4. Hu, M., Deng, J., Li, C., Li, D., Li, S., Shen, B.,. & Fan, M. (2025). Thermal performance optimization of air-cooled electronic equipment arrangement under uniform and non-uniform heat flux conditions. Applied Thermal Engineering, 128646.
  5. Huang, S., Long, C., Hu, Z., Xu, Y., Zhang, B., & Zhi, C. (2024). Thermal Performance of Heat Sink Filled with Double-Porosity Porous Aluminum Skeleton/Paraffin Phase Change Material. Micromachines, 15(6), 806.
  6. Hussein, H. A. (2023). Numerical hydrothermal evaluation of heat transfer in a multi-mini-channel heat sink: effect of square pin fins. Results in Engineering, 20, 101403.
  7. Kirchhofer, M., Krieger, M., & Hofer, D. (2023). A comparative study on numerical flow simulations of a centrifugal electronic cooling fan using four different turbulence models. Energies, 16(23), 7864.
  8. Kumar, A., Dutt, N., & Awasthi, M. K. (Eds.). (2024). Heat Transfer Enhancement Techniques: Thermal Performance, Optimization and Applications. John Wiley & Sons.
  9. Kumar, A., Kumar, R., & Behura, A. K. (2017). A review of electro thermal cooling systems with heat sink. Int. J. Eng. Res. Manag.(IJERM), 4(8), 19-23.
  10. Lakshminarasimha, N. (2015). Numerical Investigation of forced convection cooling of Electrical enclosure using CFD. Journal of Engineering Research and Applications, 5(11-5), 62-66.
  11. Lee, J., Darges, S. J., & Mudawar, I. (2021). Experimental investigation and analysis of parametric trends of instability in two-phase micro-channel heat sinks. International Journal of Heat and Mass Transfer, 170, 120980.
  12. Mokhtari, M., Gerdroodbary, M. B., Yeganeh, R., & Fallah, K. (2017). Numerical study of mixed convection heat transfer of various fin arrangements in a horizontal channel. Engineering science and technology, an international journal, 20(3), 1106-1114.
  13. Nair, V., Baby, A., Murali, M., & Nair, M. B. (2024). A comprehensive review of air-cooled heat sinks for thermal management of electronic devices. International Communications in Heat and Mass Transfer, 159, 108055.
  14. Pua, S. W., Ong, K. S., Lai, K. C., & Naghavi, M. S. (2019). Natural and forced convection heat transfer coefficients of various finned heat sinks for miniature electronic systems. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 233(2), 249-261.
  15. Versteeg, H. K. (2007). An introduction to computational fluid dynamics the finite volume method, 2/E. Pearson Education India.
  16. Zhang, Z., Wang, X., & Yan, Y. (2021). A review of the state-of-the-art in electronic cooling. e-Prime-Advances in Electrical Engineering, Electronics and Energy, 1, 100009.
  17. Hu, M., Deng, J., Li, C., Li, D., Li, S., Shen, B.,. & Fan, M. (2025). Thermal performance optimization of air-cooled electronic equipment arrangement under uniform and non-uniform heat flux conditions. Applied Thermal Engineering, 128646.