SavedAdd your journal

Journals / Journal of the Turkish Chemical Society Section B: Chemical Engineering / 2026 / Volume: 7 Issue: 1

Optimization and PID Control of pH and Temperature in an Electrocoagulation Process

Şule Camcıoğlu(ANKARA ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ)0000-0002-8983-3193
Baran Özyurt(Ankara Üniversitesi Mühendislik Fakültesi)0000-0003-0011-8351
Pages
—
Publication Date
2024-04-01
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results show that 34.47% chemical oxygen demand (COD), 98.06% total suspended solids (TSS), 99.80% turbidity, 99.93% color, and 13.40% SO42- removal is achieved in 45 minutes of process operation under controlled conditions and COD, TSS, turbidity, color and SO42- removal are increased by 10.92, 2.97, 4.06, 2.89, 3.17 respectively in comparison with uncontrolled operation.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this work, effects of temperature and pH in batch treatment of pulp and paper mill wastewater using electrocoagulation has been investigated.
📊
Key Findings & Data:Conductivity, temperature, and pH are selected as controlled variables; supporting electrolyte, cooling water, acid and base flow rates are selected as manipulated variables, respectively.
💡
Conclusion & Impact:Results show that 34.47% chemical oxygen demand (COD), 98.06% total suspended solids (TSS), 99.80% turbidity, 99.93% color, and 13.40% SO42- removal is achieved in 45 minutes of process operation under controlled conditions and COD, TSS, turbidity, color and SO42- removal are increased by 10.92, 2.97, 4.06, 2.89, 3.17 respectively in comparison with uncontrolled operation.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Pulp and paper mill wastewater · temperature · electrocoagulation

Abstract

In this work, effects of temperature and pH in batch treatment of pulp and paper mill wastewater using electrocoagulation has been investigated. Conductivity, temperature, and pH are selected as controlled variables; supporting electrolyte, cooling water, acid and base flow rates are selected as manipulated variables, respectively. Real time experimental multi input-multi output (MIMO) control of conductivity, temperature, and pH under constant current conditions are achieved using MIMO Proportional Integral Derivative (PID) control algorithms coded in MATLAB™. A central composite design (CCD) has been applied to the system under controlled conditions and optimum pH and temperature values are obtained using response surface methodology (RSM). Both controlled and uncontrolled experiments are performed using optimum values and results are compared in terms of removal efficiencies of pollutants. Results show that 34.47% chemical oxygen demand (COD), 98.06% total suspended solids (TSS), 99.80% turbidity, 99.93% color, and 13.40% SO42- removal is achieved in 45 minutes of process operation under controlled conditions and COD, TSS, turbidity, color and SO42- removal are increased by 10.92, 2.97, 4.06, 2.89, 3.17 respectively in comparison with uncontrolled operation. The highest removal percentages are obtained under controlled operating conditions as 98.5% and 98.3% for turbidity and color, respectively, for 10 minutes operation. It is concluded that optimum process operating conditions for removal of turbidity and color of pulp and paper mill wastewater is obtained under constant 6.45 pH, 23.24 °C temperature, 1.78 mS/cm conductivity, and power consumption is reduced by 25.3% under controlled conditions.

🔖

Cite This Article

Camcıoğlu, Ş., Özyurt, B. (2024). Optimization and PID Control of pH and Temperature in an Electrocoagulation Process. Journal of the Turkish Chemical Society Section B: Chemical Engineering, Volume: 7 Issue: 1. https://doi.org/10.58692/jotcsb.1353347

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (27)

  1. Alinsafi, A., Khemis, M., Pons, M. N., Leclerc, J. P., Yaacoubi, A., Benhammou, A., & Nejmeddine, A. (2005). Electro-coagulation of reactive textile dyes and textile wastewater. Chemical Engineering and Processing: Process Intensification, 44(4), 461–470. https://doi.org/https://doi.org/10.1016/j.cep.2004.06.010
  2. Attour, A., Touati, M., Tlili, M., Ben Amor, M., Lapicque, F., & Leclerc, J.-P. (2014). Influence of operating parameters on phosphate removal from water by electrocoagulation using aluminum electrodes. Separation and Purification Technology, 123, 124–129. https://doi.org/https://doi.org/10.1016/j.seppur.2013.12.030
  3. Bayramoglu, M., Kobya, M., Can, O. T., & Sozbir, M. (2004). Operating cost analysis of electrocoagulation of textile dye wastewater. Separation and Purification Technology, 37(2), 117–125. https://doi.org/https://doi.org/10.1016/j.seppur.2003.09.002
  4. Bozoglu, M. D., Ertunc, S., Akay, B., Bursali, N., Vural, N., Hapoglu, H., & Demirci, Y. (2015). The effect of temperature, pH and SO2 on ethanol concentration and sugar consumption rate (SCR) in apple wine process. Journal of the Chemical Society of Pakistan, 37(3), 431–439.
  5. Camcioglu, S., Ozyurt, B., & Hapoglu, H. (2017a). Effect of process control on optimization of pulp and paper mill wastewater treatment by electrocoagulation. Process Safety and Environmental Protection, 111, 300–319. https://doi.org/https://doi.org/10.1016/j.psep.2017.07.014
  6. Camcioglu, S., Ozyurt, B., & Hapoglu, H. (2017b). MIMO control application for pulp and paper mill wastewater treatment by electrocoagulation. Desalination and Water Treatment, 93, 200–213.
  7. Camcıoğlu, Ş., Özyurt, B., Doğan, İ. C., & Hapoğlu, H. (2017). Application of response surface methodology as a new PID tuning method in an electrocoagulation process control case. Water Science and Technology, 76(12), 3410–3427. https://doi.org/10.2166/wst.2017.506
  8. Cañizares, P., Carmona, M., Lobato, J., Martínez, F., & Rodrigo, M. A. (2005). Electrodissolution of Aluminum Electrodes in Electrocoagulation Processes. Industrial & Engineering Chemistry Research, 44(12), 4178–4185. https://doi.org/10.1021/ie048858a
  9. Eaton, A. D., Clesceri, L. S., Franson, M. A. H., Association, A. P. H., Rice, E. W., Greenberg, A. E., Association, A. W. W., & Federation, W. E. (2005). Standard Methods for the Examination of Water & Wastewater (Issue 21. c.). American Public Health Association. https://books.google.com.tr/books?id=buTn1rmfSI4C
  10. El-Ashtoukhy, E.-S. Z., Amin, N. K., & Abdelwahab, O. (2009). Treatment of paper mill effluents in a batch-stirred electrochemical tank reactor. Chemical Engineering Journal, 146(2), 205–210. https://doi.org/https://doi.org/10.1016/j.cej.2008.05.037
  11. Kalyani, K. S. P., Balasubramanian, N., & Srinivasakannan, C. (2009). Decolorization and COD reduction of paper industrial effluent using electro-coagulation. Chemical Engineering Journal, 151(1), 97–104. https://doi.org/https://doi.org/10.1016/j.cej.2009.01.050
  12. Katal, R., & Pahlavanzadeh, H. (2011). Influence of different combinations of aluminum and iron electrode on electrocoagulation efficiency: Application to the treatment of paper mill wastewater. Desalination, 265(1), 199–205. https://doi.org/https://doi.org/10.1016/j.desal.2010.07.052
  13. Khansorthong, S., & Hunsom, M. (2009). Remediation of wastewater from pulp and paper mill industry by the electrochemical technique. Chemical Engineering Journal, 151(1), 228–234. https://doi.org/https://doi.org/10.1016/j.cej.2009.02.038
  14. Korkmaz, M., Özmetin, C., Cirtlik, A., & Siğirci, Ş. I. (2017). Full factorial design of experiments for boron removal from solutions by Purolite S 108 resin converted to hydroxyl form. Particulate Science and Technology, 35(6), 742–748. https://doi.org/10.1080/02726351.2016.1196277
  15. Linares-Hernández, I., Barrera-Díaz, C., Roa-Morales, G., Bilyeu, B., & Ureña-Núñez, F. (2009). Influence of the anodic material on electrocoagulation performance. Chemical Engineering Journal, 148(1), 97–105. https://doi.org/https://doi.org/10.1016/j.cej.2008.08.007
  16. Merzouk, B., Gourich, B., Sekki, A., Madani, K., Vial, C., & Barkaoui, M. (2009). Studies on the decolorization of textile dye wastewater by continuous electrocoagulation process. Chemical Engineering Journal, 149(1), 207–214. https://doi.org/https://doi.org/10.1016/j.cej.2008.10.018
  17. Mollah, M. Y. A., Morkovsky, P., Gomes, J. A. G., Kesmez, M., Parga, J., & Cocke, D. L. (2004). Fundamentals, present and future perspectives of electrocoagulation. Journal of Hazardous Materials, 114(1), 199–210. https://doi.org/https://doi.org/10.1016/j.jhazmat.2004.08.009
  18. Özyurt, B., Camcıoğlu, Ş., Karatokuş, T., & Yüksek, C. (2021). Ayçiçek yağı endüstrisi atık sularının koagülasyon-flokülasyon ve elektro-Fenton yöntemleriyle arıtılması. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 36(1), 275–290. https://doi.org/10.17341/gazimmfd.553847
  19. Pokhrel, D., & Viraraghavan, T. (2004). Treatment of pulp and paper mill wastewater—a review. Science of The Total Environment, 333(1), 37–58. https://doi.org/https://doi.org/10.1016/j.scitotenv.2004.05.017
  20. Rai, A., Mohanty, B., & Bhargava, R. (2016). Supercritical extraction of sunflower oil: A central composite design for extraction variables. Food Chemistry, 192, 647–659. https://doi.org/https://doi.org/10.1016/j.foodchem.2015.07.070
  21. Soloman, P. A., Ahmed Basha, C., Velan, M., Balasubramanian, N., & Marimuthu, P. (2009). Augmentation of biodegradability of pulp and paper industry wastewater by electrochemical pre-treatment and optimization by RSM. Separation and Purification Technology, 69(1), 109–117. https://doi.org/https://doi.org/10.1016/j.seppur.2009.07.002
  22. Sridhar, R., Sivakumar, V., Prince Immanuel, V., & Prakash Maran, J. (2011). Treatment of pulp and paper industry bleaching effluent by electrocoagulant process. Journal of Hazardous Materials, 186(2), 1495–1502. https://doi.org/https://doi.org/10.1016/j.jhazmat.2010.12.028
  23. Terrazas, E., Vázquez, A., Briones, R., Lázaro, I., & Rodríguez, I. (2010). EC treatment for reuse of tissue paper wastewater: Aspects that affect energy consumption. Journal of Hazardous Materials, 181(1), 809–816. https://doi.org/https://doi.org/10.1016/j.jhazmat.2010.05.086
  24. Uğurlu, M., Gürses, A., Doğar, Ç., & Yalçın, M. (2008). The removal of lignin and phenol from paper mill effluents by electrocoagulation. Journal of Environmental Management, 87(3), 420–428. https://doi.org/https://doi.org/10.1016/j.jenvman.2007.01.007
  25. Vepsäläinen, M., Ghiasvand, M., Selin, J., Pienimaa, J., Repo, E., Pulliainen, M., & Sillanpää, M. (2009). Investigations of the effects of temperature and initial sample pH on natural organic matter (NOM) removal with electrocoagulation using response surface method (RSM). Separation and Purification Technology, 69(3), 255–261. https://doi.org/https://doi.org/10.1016/j.seppur.2009.08.001
  26. Zaied, M., & Bellakhal, N. (2009). Electrocoagulation treatment of black liquor from paper industry. Journal of Hazardous Materials, 163(2), 995–1000. https://doi.org/https://doi.org/10.1016/j.jhazmat.2008.07.115
  27. Özyurt, B., Camcıoğlu, Ş., Karatokuş, T., & Yüksek, C. (2021). Ayçiçek yağı endüstrisi atık sularının koagülasyon-flokülasyon ve elektro-Fenton yöntemleriyle arıtılması. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 36(1), 275–290. https://doi.org/10.17341/gazimmfd.553847