In the PP + 40% PET mixture, the transition from droplet form to fibril form appears clearly in the structure.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:In this study, the morphology and spectroscopic properties of polypropylene (PP)/ polyethyleneterephthalate (PET) blends were investigated by PET addition to improve the mechanical properties of polypropylene.
📊
Key Findings & Data:As the percentage of the mixture increases in the SEM images, there is a gap between the PET and the structure depending on the addition ratio.
💡
Conclusion & Impact:In the PP + 40% PET mixture, the transition from droplet form to fibril form appears clearly in the structure.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Polymer · PP/PET blends · morphology
Abstract
In this study, the morphology and spectroscopic properties of polypropylene (PP)/ polyethyleneterephthalate (PET) blends were investigated by PET addition to improve the mechanical properties of polypropylene. For the morphological characteristics of the PP + PET blends, SEM analysis for the spectroscopic properties and FT-IR analysis were performed. As the percentage of the mixture increases in the SEM images, there is a gap between the PET and the structure depending on the addition ratio. In the PP + 40% PET mixture, the transition from droplet form to fibril form appears clearly in the structure.
Çavuş, F. K., Beken, M., Özcanlı, Y. (2016). An Sem Study of Pp/Pet Blends. Journal of Engineering Technology and Applied Sciences, Cilt: 1 Sayı: 3, 127–131. https://doi.org/10.30931/jetas.297612
Si X., “Preparation and study of polypropylene/polyethyleneterephthalate composite fibres.”, Composites Science and Technology 68 (2008): 2943–2947
Torunoğlu Turan G., “Preparation and characterization of poly(ethyleneterephthalate) – polypropylene blends”(PhD Diss., University of Istanbul Technical, 2012).
Mirjalili, F., “Enhancing the Dyeability of Polypropylene Fibers by Melt Blending with Polyethylene Terephthalate.”, The Scientific World Journal, 2013.
Çam, Ç., “Productıon Of Surface Coatıng Materıals From Post-Consumer Pet Bottles ”, (M.Sc. Diss., University of Instanbul, 2015).
Gartner, C., et al. ”Grafting of Maleic Anhyride on Polyproplene and ıts effect on blending with poly(ethylene terephthalate.” 48(2008):1910-1916.
Kosovalı Çavuş F., “Modelling of Mechanical Properties of PP/PET Blends with Artificial Neural Networks” (paper presented at 9th International Physics Conference of the Balkan Physical Union – BPU9, Istanbul, Turkey, August 24 – 27, 2015)
Torunoğlu Turan G., “Preparation and characterization of poly(ethyleneterephthalate) – polypropylene blends”(PhD Diss., University of Istanbul Technical, 2012).