Dergiler / Journal of Engineering Technology and Applied Sciences / 2016 / Cilt: 1 Sayı: 3

An Sem Study of Pp/Pet Blends

Sayfa
127–131
Yayın Tarihi
2016-12-27
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

In the PP + 40% PET mixture, the transition from droplet form to fibril form appears clearly in the structure.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, the morphology and spectroscopic properties of polypropylene (PP)/ polyethyleneterephthalate (PET) blends were investigated by PET addition to improve the mechanical properties of polypropylene.
📊
Temel Bulgular & Veri:As the percentage of the mixture increases in the SEM images, there is a gap between the PET and the structure depending on the addition ratio.
💡
Sonuç & Katkı:In the PP + 40% PET mixture, the transition from droplet form to fibril form appears clearly in the structure.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Polymer · PP/PET blends · morphology

Abstract

In this study, the morphology and spectroscopic properties of polypropylene (PP)/ polyethyleneterephthalate (PET) blends were investigated by PET addition to improve the mechanical properties of polypropylene. For the morphological characteristics of the PP + PET blends, SEM analysis for the spectroscopic properties and FT-IR analysis were performed. As the percentage of the mixture increases in the SEM images, there is a gap between the PET and the structure depending on the addition ratio. In the PP + 40% PET mixture, the transition from droplet form to fibril form appears clearly in the structure.

🔖

Bu Makaleye Atıf Yap

Çavuş, F. K., Beken, M., Özcanlı, Y. (2016). An Sem Study of Pp/Pet Blends. Journal of Engineering Technology and Applied Sciences, Cilt: 1 Sayı: 3, 127–131. https://doi.org/10.30931/jetas.297612

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (7)

  1. Si X., “Preparation and study of polypropylene/polyethyleneterephthalate composite fibres.”, Composites Science and Technology 68 (2008): 2943–2947
  2. Torunoğlu Turan G., “Preparation and characterization of poly(ethyleneterephthalate) – polypropylene blends”(PhD Diss., University of Istanbul Technical, 2012).
  3. Mirjalili, F., “Enhancing the Dyeability of Polypropylene Fibers by Melt Blending with Polyethylene Terephthalate.”, The Scientific World Journal, 2013.
  4. Çam, Ç., “Productıon Of Surface Coatıng Materıals From Post-Consumer Pet Bottles ”, (M.Sc. Diss., University of Instanbul, 2015).
  5. Gartner, C., et al. ”Grafting of Maleic Anhyride on Polyproplene and ıts effect on blending with poly(ethylene terephthalate.” 48(2008):1910-1916.
  6. Kosovalı Çavuş F., “Modelling of Mechanical Properties of PP/PET Blends with Artificial Neural Networks” (paper presented at 9th International Physics Conference of the Balkan Physical Union – BPU9, Istanbul, Turkey, August 24 – 27, 2015)
  7. Torunoğlu Turan G., “Preparation and characterization of poly(ethyleneterephthalate) – polypropylene blends”(PhD Diss., University of Istanbul Technical, 2012).