In the PP + 40% PET mixture, the transition from droplet form to fibril form appears clearly in the structure.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:In this study, the morphology and spectroscopic properties of polypropylene (PP)/ polyethyleneterephthalate (PET) blends were investigated by PET addition to improve the mechanical properties of polypropylene.
📊
Temel Bulgular & Veri:As the percentage of the mixture increases in the SEM images, there is a gap between the PET and the structure depending on the addition ratio.
💡
Sonuç & Katkı:In the PP + 40% PET mixture, the transition from droplet form to fibril form appears clearly in the structure.
In this study, the morphology and spectroscopic properties of polypropylene (PP)/ polyethyleneterephthalate (PET) blends were investigated by PET addition to improve the mechanical properties of polypropylene. For the morphological characteristics of the PP + PET blends, SEM analysis for the spectroscopic properties and FT-IR analysis were performed. As the percentage of the mixture increases in the SEM images, there is a gap between the PET and the structure depending on the addition ratio. In the PP + 40% PET mixture, the transition from droplet form to fibril form appears clearly in the structure.
ÇAVUŞ, F. K., BEKEN, M., ÖZCANLI, Y. (2016). An Sem Study of Pp/Pet Blends. Journal of Engineering Technology and Applied Sciences, Cilt: 1 - Sayı: 3, 127–131. https://ajindex.com/articles/677523
Si X., “Preparation and study of polypropylene/polyethyleneterephthalate composite fibres.”, Composites Science and Technology 68 (2008): 2943–2947 [2] Torunoğlu Turan G., “Preparation and characterization of poly(ethyleneterephthalate) – polypropylene blends”(PhD Diss., University of Istanbul Technical, 2012). [3] Mirjalili, F., “Enhancing the Dyeability of Polypropylene Fibers by Melt Blending with Polyethylene Terephthalate.”, The Scientific World Journal, 2013. [4] Çam, Ç., “Productıon Of Surface Coatıng Materıals From Post-Consumer Pet Bottles ”, (M.Sc. Diss., University of Instanbul, 2015). [5] Gartner, C., et al. ”Grafting of Maleic Anhyride on Polyproplene and ıts effect on blending with poly(ethylene terephthalate.” 48(2008):1910-1916. [6] Kosovalı Çavuş F., “Modelling of Mechanical Properties of PP/PET Blends with Artificial Neural Networks” (paper presented at 9th International Physics Conference of the Balkan Physical Union – BPU9, Istanbul, Turkey, August 24 – 27, 2015)