It was observed that water absorbency increased with the increase of PEDOT ratio of hydrogel composites.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:In this study, poly(acrylic acid) (PAA)/bentonite (BNT) composites were synthesized through chemical crosslinking by a chemical polymerization using ammonium persulfate as initiator and N,N’-methylenebisacrylamide as crosslinker.
📊
Key Findings & Data:Poly(3,4-ethylenedioxythiophene) (PEDOT) was synthesized by oxidative polymerization and then PEDOT/PAA/BNT composites were prepared by mixing PEDOT at 5%, 10% and 20% by mass into PAA/BNT composite.
💡
Conclusion & Impact:It was observed that water absorbency increased with the increase of PEDOT ratio of hydrogel composites.
In this study, poly(acrylic acid) (PAA)/bentonite (BNT) composites were synthesized through chemical crosslinking by a chemical polymerization using ammonium persulfate as initiator and N,N’-methylenebisacrylamide as crosslinker. Poly(3,4-ethylenedioxythiophene) (PEDOT) was synthesized by oxidative polymerization and then PEDOT/PAA/BNT composites were prepared by mixing PEDOT at 5%, 10% and 20% by mass into PAA/BNT composite. These hydrogel composites were characterized by FTIR, XRD and SEM. It was observed that water absorbency increased with the increase of PEDOT ratio of hydrogel composites.
Hüner, K. (2022). Preparation and Swelling Properties of Poly(3,4–Thylenedioxythiophene)/Poly(Acrylic Acid)/bentonite Composite Hydrogels. Journal of Engineering Technology and Applied Sciences, Cilt: 7 Sayı: 3, 177–183. https://doi.org/10.30931/jetas.1001134
Şen, M., Güven, O., "Prediction of the Swelling Behaviour of Amphiphilic Hydrogels and the Determination of Average Molecular Weight Between Cross-links", Computational and Theoretical Polymer Science 11 (2000): 475-482.
Huglin, M.B., Zakaria, M.B., "Swelling Properties of Copolymeric Hydrogels Prepared by Gamma Irradiation", Journal of Applied Polymer Science 31 (1986): 457-475.
Chirani, N., Yahia, L.H., Gritsch, L., Motta, F.L., Chirani, S., Farè, S., "History and applications of hydrogels", Journal of Biomedical Sciences (2015): 1-23.
Qui, Y., Park, K., "Environment-Sensitive Hydrogels for Drug Delivery", Advanced Drug Deliver Reviews 53 (2001): 321-339.
Gupta, P., Vermani, K., Garg, S., "Hydogels from Controlled Release to pH Responsive Drug Delivery", Drug Discovery Today 7 (2002): 569-578.
Jeang, B., Gutowska, A., "Lessons from Nature: Stimuli-Responsive Polymers and Their Biomedical Applications", Trends Biotechnology 20 (2002): 305-311.
Mantha, S., Pillai, S., Khayambashi, P., Upadhyay, A., Zhang, Y., Tao, O., Pham, P.H., Tran, S.D., "Smart hydrogels in tissue engineering and regenerative medicine", Materials 12(20) (2019): 3323.
Ilić-Stojanović, S., Nikolić, L., Nikolić, V., Petrović, S., Stanković, M., Mladenović-Ranisavljević, I., "Stimuli-sensitive hydrogels for pharmaceutical and medical applications", Facta universitatis-series: Physics, Chemistry and Technology 9(1) (2011): 37-56.
Deen, G.R., Loh, X.J., "Stimuli-responsive cationic hydrogels in drug delivery applications", Gels 4(1) (2018): 13.
Maiz-Fernandez, S., Pérez-Alvarez, L., Ruiz-Rubio, L., Vilas-Vilela, J.L., Lanceros-Méndez, S., "Multifunctional materials based on smart hydrogels for biomedical and 4D applications", Advanced Lightweight Multifunctional Materials (2020): 407.
Shi, Q., Liu, H., Tang, D., Li, Y., Li, X., Xu, F., "Bioactuators based on stimulus-responsive hydrogels and their emerging biomedical applications", NPG Asia Materials 11(1) (2019): 1-21.
Chaterji, S., Kwon, I.K., Park, K., "Smart polymeric gels: redefining the limits of biomedical device", Progress in polymer science 32(8-9) (2007): 1083-1122.
Liu, F., Urban, M.W., "Recent advances and challenges in designing stimuli-responsive polymers", Progress in polymer science 35(1-2) (2010): 3-23.
Hüner, K., Ulutaş, K., Deligöz, H., Sartinska, L., Eren, T., "ROMP‐based boron nitride composites", Journal of Applied Polymer Science 135(2) (2018): 45658.
Huner, K., "Synthesis, characterization, and thermoelectric properties of poly(p‐phenylenediamine)/poly(sulfonic acid diphenyl aniline) composites", Polymer Engineering & Science 62(8) (2022): 2560-2568.
Groenendaal, L., Jonas, F., Freitag, D., Pielartzik, H., Reynolds, J.R., "Poly (3, 4‐ethylenedioxythiophene) and its derivatives: past, present, and future", Advanced materials 12(7) (2000): 481-494.
Huner, K., Karaman, F., "The effect of external magnetic field on the thermoelectric properties of polythiophene", Materials Research Express 6(1) (2018): 015302.
Hüner, K., "Thermoelectric Properties of ex-situ PTh/Pedot Composites", Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi 21(4) (2021): 783-791.
Yacob, N., Hashim, K., "Morphological effect on swelling behaviour of hydrogel", In AIP Conference Proceedings American Institute of Physics 1584(1) (2014): 153-159.
Kam, W., Liew, C.W., Lim, J.Y., Ramesh, S., "Electrical, structural, and thermal studies of antimony trioxide-doped poly(acrylic acid)-based composite polymer electrolytes", Ionics 20(5) (2014): 665-674.
Huner, K., Sarac, A.S., "Surface electrocoating of single carbon fibre with electroactive 3, 4-ethylenedioxythiophene/1‐p (tolylsulphonyl) pyrrole copolymer: effect of dielectric constant of solvent", Bulletin of Materials Science 44(4) (2021): 1-11.
Rafiei, H.R., Shirvani, M., Ogunseitan, O.A., "Removal of lead from aqueous solutions by a poly(acrylic acid)/bentonite nanocomposite", Applied water science 6(4) (2016): 331-338.
Yoon, D.H., Yoon, S.H., Ryu, K.S., Park, Y.J., "PEDOT: PSS as multi-functional composite material for enhanced Li-air-battery air electrodes", Scientific reports 6(1) (2016): 1-9.
Lv, Q., Wu, M., Shen, Y., "Enhanced swelling ratio and water retention capacity for novel super-absorbent hydrogel", Colloids and Surfaces A: Physicochemical and Engineering Aspects 583 (2019): 123972.
Astrini, N., Anah, L., Haryono, A., "Water absorbency of chitosan grafted acrylic acid hydrogels", IOP Conference Series: Materials Science and Engineering 223 (2017): 012045.
Şen, M., Güven, O., "Prediction of the Swelling Behaviour of Amphiphilic Hydrogels and the Determination of Average Molecular Weight Between Cross-links", Computational and Theoretical Polymer Science 11 (2000): 475-482.
Huglin, M.B., Zakaria, M.B., "Swelling Properties of Copolymeric Hydrogels Prepared by Gamma Irradiation", Journal of Applied Polymer Science 31 (1986): 457-475.
Chirani, N., Yahia, L.H., Gritsch, L., Motta, F.L., Chirani, S., Farè, S., "History and applications of hydrogels", Journal of Biomedical Sciences (2015): 1-23.
Qui, Y., Park, K., "Environment-Sensitive Hydrogels for Drug Delivery", Advanced Drug Deliver Reviews 53 (2001): 321-339.
Gupta, P., Vermani, K., Garg, S., "Hydogels from Controlled Release to pH Responsive Drug Delivery", Drug Discovery Today 7 (2002): 569-578.
Jeang, B., Gutowska, A., "Lessons from Nature: Stimuli-Responsive Polymers and Their Biomedical Applications", Trends Biotechnology 20 (2002): 305-311.
Mantha, S., Pillai, S., Khayambashi, P., Upadhyay, A., Zhang, Y., Tao, O., Pham, P.H., Tran, S.D., "Smart hydrogels in tissue engineering and regenerative medicine", Materials 12(20) (2019): 3323.
Ilić-Stojanović, S., Nikolić, L., Nikolić, V., Petrović, S., Stanković, M., Mladenović-Ranisavljević, I., "Stimuli-sensitive hydrogels for pharmaceutical and medical applications", Facta universitatis-series: Physics, Chemistry and Technology 9(1) (2011): 37-56.
Deen, G.R., Loh, X.J., "Stimuli-responsive cationic hydrogels in drug delivery applications", Gels 4(1) (2018): 13.
Maiz-Fernandez, S., Pérez-Alvarez, L., Ruiz-Rubio, L., Vilas-Vilela, J.L., Lanceros-Méndez, S., "Multifunctional materials based on smart hydrogels for biomedical and 4D applications", Advanced Lightweight Multifunctional Materials (2020): 407.
Shi, Q., Liu, H., Tang, D., Li, Y., Li, X., Xu, F., "Bioactuators based on stimulus-responsive hydrogels and their emerging biomedical applications", NPG Asia Materials 11(1) (2019): 1-21.
Chaterji, S., Kwon, I.K., Park, K., "Smart polymeric gels: redefining the limits of biomedical device", Progress in polymer science 32(8-9) (2007): 1083-1122.
Liu, F., Urban, M.W., "Recent advances and challenges in designing stimuli-responsive polymers", Progress in polymer science 35(1-2) (2010): 3-23.
Hüner, K., Ulutaş, K., Deligöz, H., Sartinska, L., Eren, T., "ROMP‐based boron nitride composites", Journal of Applied Polymer Science 135(2) (2018): 45658.
Huner, K., "Synthesis, characterization, and thermoelectric properties of poly(p‐phenylenediamine)/poly(sulfonic acid diphenyl aniline) composites", Polymer Engineering & Science 62(8) (2022): 2560-2568.
Groenendaal, L., Jonas, F., Freitag, D., Pielartzik, H., Reynolds, J.R., "Poly (3, 4‐ethylenedioxythiophene) and its derivatives: past, present, and future", Advanced materials 12(7) (2000): 481-494.
Huner, K., Karaman, F., "The effect of external magnetic field on the thermoelectric properties of polythiophene", Materials Research Express 6(1) (2018): 015302.
Hüner, K., "Thermoelectric Properties of ex-situ PTh/Pedot Composites", Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi 21(4) (2021): 783-791.
Yacob, N., Hashim, K., "Morphological effect on swelling behaviour of hydrogel", In AIP Conference Proceedings American Institute of Physics 1584(1) (2014): 153-159.
Kam, W., Liew, C.W., Lim, J.Y., Ramesh, S., "Electrical, structural, and thermal studies of antimony trioxide-doped poly(acrylic acid)-based composite polymer electrolytes", Ionics 20(5) (2014): 665-674.
Huner, K., Sarac, A.S., "Surface electrocoating of single carbon fibre with electroactive 3, 4-ethylenedioxythiophene/1‐p (tolylsulphonyl) pyrrole copolymer: effect of dielectric constant of solvent", Bulletin of Materials Science 44(4) (2021): 1-11.
Rafiei, H.R., Shirvani, M., Ogunseitan, O.A., "Removal of lead from aqueous solutions by a poly(acrylic acid)/bentonite nanocomposite", Applied water science 6(4) (2016): 331-338.
Yoon, D.H., Yoon, S.H., Ryu, K.S., Park, Y.J., "PEDOT: PSS as multi-functional composite material for enhanced Li-air-battery air electrodes", Scientific reports 6(1) (2016): 1-9.
Lv, Q., Wu, M., Shen, Y., "Enhanced swelling ratio and water retention capacity for novel super-absorbent hydrogel", Colloids and Surfaces A: Physicochemical and Engineering Aspects 583 (2019): 123972.
Astrini, N., Anah, L., Haryono, A., "Water absorbency of chitosan grafted acrylic acid hydrogels", IOP Conference Series: Materials Science and Engineering 223 (2017): 012045.