Dergiler / Journal of Engineering Technology and Applied Sciences / 2022 / Cilt: 7 Sayı: 3

Preparation and Swelling Properties of Poly(3,4–Thylenedioxythiophene)/Poly(Acrylic Acid)/bentonite Composite Hydrogels

Keziban Hüner(YILDIZ TEKNİK ÜNİVERSİTESİ)0000-0001-7235-6338
Sayfa
177–183
Yayın Tarihi
2022-12-30
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

It was observed that water absorbency increased with the increase of PEDOT ratio of hydrogel composites.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, poly(acrylic acid) (PAA)/bentonite (BNT) composites were synthesized through chemical crosslinking by a chemical polymerization using ammonium persulfate as initiator and N,N’-methylenebisacrylamide as crosslinker.
📊
Temel Bulgular & Veri:Poly(3,4-ethylenedioxythiophene) (PEDOT) was synthesized by oxidative polymerization and then PEDOT/PAA/BNT composites were prepared by mixing PEDOT at 5%, 10% and 20% by mass into PAA/BNT composite.
💡
Sonuç & Katkı:It was observed that water absorbency increased with the increase of PEDOT ratio of hydrogel composites.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Hydrogel · poly(3 · 4-ethylenedioxythiophene)

Abstract

In this study, poly(acrylic acid) (PAA)/bentonite (BNT) composites were synthesized through chemical crosslinking by a chemical polymerization using ammonium persulfate as initiator and N,N’-methylenebisacrylamide as crosslinker. Poly(3,4-ethylenedioxythiophene) (PEDOT) was synthesized by oxidative polymerization and then PEDOT/PAA/BNT composites were prepared by mixing PEDOT at 5%, 10% and 20% by mass into PAA/BNT composite. These hydrogel composites were characterized by FTIR, XRD and SEM. It was observed that water absorbency increased with the increase of PEDOT ratio of hydrogel composites.

🔖

Bu Makaleye Atıf Yap

Hüner, K. (2022). Preparation and Swelling Properties of Poly(3,4–Thylenedioxythiophene)/Poly(Acrylic Acid)/bentonite Composite Hydrogels. Journal of Engineering Technology and Applied Sciences, Cilt: 7 Sayı: 3, 177–183. https://doi.org/10.30931/jetas.1001134

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (54)

  1. Şen, M., Güven, O., "Prediction of the Swelling Behaviour of Amphiphilic Hydrogels and the Determination of Average Molecular Weight Between Cross-links", Computational and Theoretical Polymer Science 11 (2000): 475-482.
  2. Huglin, M.B., Zakaria, M.B., "Swelling Properties of Copolymeric Hydrogels Prepared by Gamma Irradiation", Journal of Applied Polymer Science 31 (1986): 457-475.
  3. Chirani, N., Yahia, L.H., Gritsch, L., Motta, F.L., Chirani, S., Farè, S., "History and applications of hydrogels", Journal of Biomedical Sciences (2015): 1-23.
  4. Qui, Y., Park, K., "Environment-Sensitive Hydrogels for Drug Delivery", Advanced Drug Deliver Reviews 53 (2001): 321-339.
  5. Gupta, P., Vermani, K., Garg, S., "Hydogels from Controlled Release to pH Responsive Drug Delivery", Drug Discovery Today 7 (2002): 569-578.
  6. Jeang, B., Gutowska, A., "Lessons from Nature: Stimuli-Responsive Polymers and Their Biomedical Applications", Trends Biotechnology 20 (2002): 305-311.
  7. Mantha, S., Pillai, S., Khayambashi, P., Upadhyay, A., Zhang, Y., Tao, O., Pham, P.H., Tran, S.D., "Smart hydrogels in tissue engineering and regenerative medicine", Materials 12(20) (2019): 3323.
  8. Ilić-Stojanović, S., Nikolić, L., Nikolić, V., Petrović, S., Stanković, M., Mladenović-Ranisavljević, I., "Stimuli-sensitive hydrogels for pharmaceutical and medical applications", Facta universitatis-series: Physics, Chemistry and Technology 9(1) (2011): 37-56.
  9. Deen, G.R., Loh, X.J., "Stimuli-responsive cationic hydrogels in drug delivery applications", Gels 4(1) (2018): 13.
  10. Maiz-Fernandez, S., Pérez-Alvarez, L., Ruiz-Rubio, L., Vilas-Vilela, J.L., Lanceros-Méndez, S., "Multifunctional materials based on smart hydrogels for biomedical and 4D applications", Advanced Lightweight Multifunctional Materials (2020): 407.
  11. Shi, Q., Liu, H., Tang, D., Li, Y., Li, X., Xu, F., "Bioactuators based on stimulus-responsive hydrogels and their emerging biomedical applications", NPG Asia Materials 11(1) (2019): 1-21.
  12. Chaterji, S., Kwon, I.K., Park, K., "Smart polymeric gels: redefining the limits of biomedical device", Progress in polymer science 32(8-9) (2007): 1083-1122.
  13. Liu, F., Urban, M.W., "Recent advances and challenges in designing stimuli-responsive polymers", Progress in polymer science 35(1-2) (2010): 3-23.
  14. Hüner, K., Ulutaş, K., Deligöz, H., Sartinska, L., Eren, T., "ROMP‐based boron nitride composites", Journal of Applied Polymer Science 135(2) (2018): 45658.
  15. Huner, K., "Synthesis, characterization, and thermoelectric properties of poly(p‐phenylenediamine)/poly(sulfonic acid diphenyl aniline) composites", Polymer Engineering & Science 62(8) (2022): 2560-2568.
  16. Groenendaal, L., Jonas, F., Freitag, D., Pielartzik, H., Reynolds, J.R., "Poly (3, 4‐ethylenedioxythiophene) and its derivatives: past, present, and future", Advanced materials 12(7) (2000): 481-494.
  17. Huner, K., Karaman, F., "The effect of external magnetic field on the thermoelectric properties of polythiophene", Materials Research Express 6(1) (2018): 015302.
  18. Hüner, K., "Thermoelectric Properties of ex-situ PTh/Pedot Composites", Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi 21(4) (2021): 783-791.
  19. Yacob, N., Hashim, K., "Morphological effect on swelling behaviour of hydrogel", In AIP Conference Proceedings American Institute of Physics 1584(1) (2014): 153-159.
  20. Kam, W., Liew, C.W., Lim, J.Y., Ramesh, S., "Electrical, structural, and thermal studies of antimony trioxide-doped poly(acrylic acid)-based composite polymer electrolytes", Ionics 20(5) (2014): 665-674.
  21. Xu, H., Cui, J., Pan, C., Yu, G., Hong, S., Wang, X., Yao, Z., "Conductance investigation of p‐MIECs fabricated by poly (3, 4‐ethylenedioxy thiophene), polyacrylic acid, polyethylene oxide, and lithium‐ion salt", Polymer Composites 36(11) (2015): 2076-2083.
  22. Huner, K., Sarac, A.S., "Surface electrocoating of single carbon fibre with electroactive 3, 4-ethylenedioxythiophene/1‐p (tolylsulphonyl) pyrrole copolymer: effect of dielectric constant of solvent", Bulletin of Materials Science 44(4) (2021): 1-11.
  23. Cheng, W.M., Hu, X.M., Zhao, Y.Y., Wu, M.Y., Hu, Z.X., Yu, X.T., "Preparation and swelling properties of poly(acrylic acid-co-acrylamide) composite hydrogels", e-Polymers 17(1) (2017): 95-106.
  24. Rafiei, H.R., Shirvani, M., Ogunseitan, O.A., "Removal of lead from aqueous solutions by a poly(acrylic acid)/bentonite nanocomposite", Applied water science 6(4) (2016): 331-338.
  25. Yoon, D.H., Yoon, S.H., Ryu, K.S., Park, Y.J., "PEDOT: PSS as multi-functional composite material for enhanced Li-air-battery air electrodes", Scientific reports 6(1) (2016): 1-9.
  26. Lv, Q., Wu, M., Shen, Y., "Enhanced swelling ratio and water retention capacity for novel super-absorbent hydrogel", Colloids and Surfaces A: Physicochemical and Engineering Aspects 583 (2019): 123972.
  27. Astrini, N., Anah, L., Haryono, A., "Water absorbency of chitosan grafted acrylic acid hydrogels", IOP Conference Series: Materials Science and Engineering 223 (2017): 012045.
  28. Şen, M., Güven, O., "Prediction of the Swelling Behaviour of Amphiphilic Hydrogels and the Determination of Average Molecular Weight Between Cross-links", Computational and Theoretical Polymer Science 11 (2000): 475-482.
  29. Huglin, M.B., Zakaria, M.B., "Swelling Properties of Copolymeric Hydrogels Prepared by Gamma Irradiation", Journal of Applied Polymer Science 31 (1986): 457-475.
  30. Chirani, N., Yahia, L.H., Gritsch, L., Motta, F.L., Chirani, S., Farè, S., "History and applications of hydrogels", Journal of Biomedical Sciences (2015): 1-23.
  31. Qui, Y., Park, K., "Environment-Sensitive Hydrogels for Drug Delivery", Advanced Drug Deliver Reviews 53 (2001): 321-339.
  32. Gupta, P., Vermani, K., Garg, S., "Hydogels from Controlled Release to pH Responsive Drug Delivery", Drug Discovery Today 7 (2002): 569-578.
  33. Jeang, B., Gutowska, A., "Lessons from Nature: Stimuli-Responsive Polymers and Their Biomedical Applications", Trends Biotechnology 20 (2002): 305-311.
  34. Mantha, S., Pillai, S., Khayambashi, P., Upadhyay, A., Zhang, Y., Tao, O., Pham, P.H., Tran, S.D., "Smart hydrogels in tissue engineering and regenerative medicine", Materials 12(20) (2019): 3323.
  35. Ilić-Stojanović, S., Nikolić, L., Nikolić, V., Petrović, S., Stanković, M., Mladenović-Ranisavljević, I., "Stimuli-sensitive hydrogels for pharmaceutical and medical applications", Facta universitatis-series: Physics, Chemistry and Technology 9(1) (2011): 37-56.
  36. Deen, G.R., Loh, X.J., "Stimuli-responsive cationic hydrogels in drug delivery applications", Gels 4(1) (2018): 13.
  37. Maiz-Fernandez, S., Pérez-Alvarez, L., Ruiz-Rubio, L., Vilas-Vilela, J.L., Lanceros-Méndez, S., "Multifunctional materials based on smart hydrogels for biomedical and 4D applications", Advanced Lightweight Multifunctional Materials (2020): 407.
  38. Shi, Q., Liu, H., Tang, D., Li, Y., Li, X., Xu, F., "Bioactuators based on stimulus-responsive hydrogels and their emerging biomedical applications", NPG Asia Materials 11(1) (2019): 1-21.
  39. Chaterji, S., Kwon, I.K., Park, K., "Smart polymeric gels: redefining the limits of biomedical device", Progress in polymer science 32(8-9) (2007): 1083-1122.
  40. Liu, F., Urban, M.W., "Recent advances and challenges in designing stimuli-responsive polymers", Progress in polymer science 35(1-2) (2010): 3-23.
  41. Hüner, K., Ulutaş, K., Deligöz, H., Sartinska, L., Eren, T., "ROMP‐based boron nitride composites", Journal of Applied Polymer Science 135(2) (2018): 45658.
  42. Huner, K., "Synthesis, characterization, and thermoelectric properties of poly(p‐phenylenediamine)/poly(sulfonic acid diphenyl aniline) composites", Polymer Engineering & Science 62(8) (2022): 2560-2568.
  43. Groenendaal, L., Jonas, F., Freitag, D., Pielartzik, H., Reynolds, J.R., "Poly (3, 4‐ethylenedioxythiophene) and its derivatives: past, present, and future", Advanced materials 12(7) (2000): 481-494.
  44. Huner, K., Karaman, F., "The effect of external magnetic field on the thermoelectric properties of polythiophene", Materials Research Express 6(1) (2018): 015302.
  45. Hüner, K., "Thermoelectric Properties of ex-situ PTh/Pedot Composites", Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi 21(4) (2021): 783-791.
  46. Yacob, N., Hashim, K., "Morphological effect on swelling behaviour of hydrogel", In AIP Conference Proceedings American Institute of Physics 1584(1) (2014): 153-159.
  47. Kam, W., Liew, C.W., Lim, J.Y., Ramesh, S., "Electrical, structural, and thermal studies of antimony trioxide-doped poly(acrylic acid)-based composite polymer electrolytes", Ionics 20(5) (2014): 665-674.
  48. Xu, H., Cui, J., Pan, C., Yu, G., Hong, S., Wang, X., Yao, Z., "Conductance investigation of p‐MIECs fabricated by poly (3, 4‐ethylenedioxy thiophene), polyacrylic acid, polyethylene oxide, and lithium‐ion salt", Polymer Composites 36(11) (2015): 2076-2083.
  49. Huner, K., Sarac, A.S., "Surface electrocoating of single carbon fibre with electroactive 3, 4-ethylenedioxythiophene/1‐p (tolylsulphonyl) pyrrole copolymer: effect of dielectric constant of solvent", Bulletin of Materials Science 44(4) (2021): 1-11.
  50. Cheng, W.M., Hu, X.M., Zhao, Y.Y., Wu, M.Y., Hu, Z.X., Yu, X.T., "Preparation and swelling properties of poly(acrylic acid-co-acrylamide) composite hydrogels", e-Polymers 17(1) (2017): 95-106.
  51. Rafiei, H.R., Shirvani, M., Ogunseitan, O.A., "Removal of lead from aqueous solutions by a poly(acrylic acid)/bentonite nanocomposite", Applied water science 6(4) (2016): 331-338.
  52. Yoon, D.H., Yoon, S.H., Ryu, K.S., Park, Y.J., "PEDOT: PSS as multi-functional composite material for enhanced Li-air-battery air electrodes", Scientific reports 6(1) (2016): 1-9.
  53. Lv, Q., Wu, M., Shen, Y., "Enhanced swelling ratio and water retention capacity for novel super-absorbent hydrogel", Colloids and Surfaces A: Physicochemical and Engineering Aspects 583 (2019): 123972.
  54. Astrini, N., Anah, L., Haryono, A., "Water absorbency of chitosan grafted acrylic acid hydrogels", IOP Conference Series: Materials Science and Engineering 223 (2017): 012045.