SavedAdd your journal

Journals / International Journal of Thermodynamics / 2026 / Volume: 29 Issue: 3

Comparative Evaluation of MCDM Methods and Weighting Techniques for Refrigerant Selection in Air-Source Heat Pump Systems

Hüsamettin Tan(Kırıkkale Üniversitesi)0000-0003-2576-8166
Ali Erişen(OSTIM TECHNICAL UNIVERSITY)0000-0001-7486-2357
Pages
—
Publication Date
2026-09-01
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The EDAS method reflects this trade-off more strongly than the other methods by effectively discriminating against alternatives with high GWP values, making it more suitable for identifying balanced working fluids within a candidate pool.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, alternative refrigerants are evaluated under a total of sixteen different operating conditions covering both heating and cooling modes by using multi-criteria decision-making methods.
📊
Key Findings & Data:Seven refrigerants are compared based on the coefficient of performance as the thermodynamic performance criterion, global warming potential as the environmental impact, and flammability classification as the safety criterion.
💡
Conclusion & Impact:The EDAS method reflects this trade-off more strongly than the other methods by effectively discriminating against alternatives with high GWP values, making it more suitable for identifying balanced working fluids within a candidate pool.
🔬Design:Lab & Field Experiment
📍Scope:Comprehensive Sample
⚙️Variables:Multi-criteria decision making · TOPSIS · VIKOR

Abstract

In this study, alternative refrigerants are evaluated under a total of sixteen different operating conditions covering both heating and cooling modes by using multi-criteria decision-making methods. Seven refrigerants are compared based on the coefficient of performance as the thermodynamic performance criterion, global warming potential as the environmental impact, and flammability classification as the safety criterion. Criterion weights are determined using the Shannon Entropy, CRITIC, and equal weighting methods, and the ranking procedures are carried out using the TOPSIS, VIKOR, and EDAS techniques. Based on the sixteen operating scenarios and the three evaluation criteria considered (COP, GWP, and flammability), R1234ze(E) is the most suitable alternative under all methods and operating conditions, achieving an average COP of approximately 3.28 together with a global warming potential of only 1 compared with 1430 for R134a, corresponding to a GWP reduction of more than 99%; R134a is consequently ranked among the least favorable options in most scenarios due to its high environmental impact, despite its competitive average COP of approximately 3.22. Despite its high global warming potential, R134a ranked among the top alternatives in some evaluation scenarios when entropy-based weighting and the TOPSIS method were applied. However, the EDAS method penalized R134a regardless of the weighting approach, indicating a higher sensitivity to unfavorable environmental indicators. The EDAS method reflects this trade-off more strongly than the other methods by effectively discriminating against alternatives with high GWP values, making it more suitable for identifying balanced working fluids within a candidate pool.

🔖

Cite This Article

Tan, H., Erişen, A. (2026). Comparative Evaluation of MCDM Methods and Weighting Techniques for Refrigerant Selection in Air-Source Heat Pump Systems. International Journal of Thermodynamics, Volume: 29 Issue: 3. https://doi.org/10.5541/ijot.1927650

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (43)

  1. S. Dong, X. Meng, X. Hu, Z. Sun, H. Wang, and Y. Luo, “Investigation of cascade high temperature heat pump optimal design theory based on experiment supporting multi-objective optimization,” Energy Conversion and Management, vol. 267, Sep. 2022, Art. no. 115873, doi: 10.1016/j.enconman.2022.115873.
  2. M. Mohanraj, C. Muraleedharan, and S. Jayaraj, “A review on recent developments in new refrigerant mixtures for vapour compression-based refrigeration, air-conditioning and heat pump units,” Int. J. Energy Res., vol. 35, no. 8, pp. 647–669, Jun. 2011, doi: 10.1002/er.1736.
  3. B. Yu, H. Ouyang, J. Shi, W. Liu, and J. Chen, “Evaluation of low-GWP and mildly flammable mixtures as new alternatives for R410A in air-conditioning and heat pump system,” International Journal of Refrigeration, vol. 121, pp. 95–104, Jan. 2021, doi: 10.1016/j.ijrefrig.2020.09.018.
  4. Y. Cao, L. W. W. Mihardjo, and T. Parikhani, “Thermal performance, parametric analysis, and multi-objective optimization of a direct-expansion solar-assisted heat pump water heater using NSGA-II and decision makings,” Applied Thermal Engineering, vol. 181, Nov. 2020, Art. no. 115892, doi: 10.1016/j.applthermaleng.2020.115892.
  5. P. N. Reddy and S. Thangavel, “Optimum Eco-friendly Refrigerant Selection Using Multi-criteria Decision-Making Methods - Engineering, Technology and Management: Practices for Sustainable Manufacturing Industry, Volume 1,” K. C. Rath, A. Rocha, S. S. Mahapatra, A. K. Sood, and A. Kumar, Eds., Cham: Springer Nature Switzerland, 2025, pp. 175–201. doi: 10.1007/978-3-031-93654-8_8.
  6. D. Staubach, B. Michel, and R. Revellin, “Refrigerant selection from an economic and TEWI analysis of cascade refrigeration systems in Europe based on annual weather data,” Applied Thermal Engineering, vol. 230, Jul. 2023, Art. no. 120747, doi: 10.1016/j.applthermaleng.2023.120747.
  7. G. Ginda, N. Iwaszczuk, and M. Dudek, “Supporting Multi-Attribute, Non-Compensating Selection of the Right Heat Pump Device for a Residential Building, Considering the Limited Availability of the Necessary Resources,” Energies, vol. 15, no. 15, p. 5478, Jul. 2022, doi: 10.3390/en15155478.
  8. M. Deymi-Dashtebayaz, V. Davoodi, J. Khutornaya, and O. Sergienko, “Parametric analysis and multi-objective optimization of a heat pump dryer based on working conditions and using different refrigerants,” Energy, vol. 284, Dec. 2023, Art. no. 129231, doi: 10.1016/j.energy.2023.129231.
  9. N. Aisyah, M. I. Alhamid, and Nasruddin, “Exergy and exergoenvironmental assessment and optimization of low GWP refrigerant for vapor compression heat pump system,” International Journal of Technology, vol. 9, no. 6, pp. 1256–1265, 2018, doi: 10.14716/ijtech.v9i6.2369.
  10. G. Poongavanam, V. Sivalingam, R. Prabakaran, M. Salman, and S. C. Kim, “Selection of the best refrigerant for replacing R134a in automobile air conditioning system using different MCDM methods: A comparative study,” Case Studies in Thermal Engineering, vol. 27, Oct. 2021, Art. no. 101344, doi: 10.1016/j.csite.2021.101344.
  11. R. Prabakaran, V. Sivalingam, S. C. Kim, P. Ganesh Kumar, and G. Praveen Kumar, “Future refrigerants with low global warming potential for residential air conditioning system: a thermodynamic analysis and MCDM tool optimization,” Environmental Science and Pollution Research, vol. 29, no. 52, pp. 78414–78428, 2022, doi: 10.1007/s11356-022-21263-1.
  12. K. Hu et al., “Multi-objective (Carbon-Exergy) optimization study of CO2 cascade systems using multiple refrigerant pairs,” International Journal of Refrigeration, vol. 164, pp. 143–153, Aug. 2024, doi: 10.1016/j.ijrefrig.2024.05.015.
  13. T. Bernat and K. Bieńczak, “Methodology of Multiple-Criteria Decision Making for Selecting a Refrigerant to Be Used in Commercial Refrigeration Equipment,” Energies, vol. 17, no. 20, Art. no. 5150, 2024, doi: 10.3390/en17205150.
  14. R. V. Rao and R. J. Lakshmi, “Refrigerant Selection in Air Conditioning Systems Considering Thermodynamic, Environmental, and Economic Performance Using the BHARAT-II Multi-Attribute Decision-Making Method,” Qeios, Jul. 2024, doi: 10.32388/94AKJ7.2.
  15. A. Ustaoglu, B. Kursuncu, A. M. Kaya, and H. Caliskan, “Analysis of vapor compression refrigeration cycle using advanced exergetic approach with Taguchi and ANOVA optimization and refrigerant selection with enviroeconomic concerns by TOPSIS analysis,” Sustainable Energy Technologies and Assessments, vol. 52, 2022, doi: 10.1016/j.seta.2022.102182.
  16. M. Yazdani, A. E. Torkayesh, E. D. R. Santibanez-Gonzalez, and S. K. Otaghsara, “Evaluation of renewable energy resources using integrated Shannon Entropy — EDAS model,” Sustain. Oper. Comput., vol. 1, pp. 35–42, 2021, doi: 10.1016/j.susoc.2020.12.002.
  17. K. Sezen, “Operation parameters variation of air source heat pump according to the outdoor temperature,” Journal of Polytechnic, vol. 26, no. 3, pp. 1179–1184, 2023, doi: 10.2339/politeknik.1240323.
  18. Vocale, G. L. Morini, and M. Spiga, “Influence of outdoor air conditions on the air source heat pumps performance,” Energy Procedia, vol. 45, pp. 653–662, 2014, doi: 10.1016/j.egypro.2014.01.070.
  19. H. Tan and Z. O. Pehlivanlı, “Thermodynamic Analysis of an Air Source Heat Pump for Kırıkkale Province,” Afyon Kocatepe University International Journal of Engineering Technology and Applied Sciences, vol. 7, no. 1, pp. 1–8, 2024, doi: 10.53448/akuumubd.1411727.
  20. I. Dinçer and M. A. Rosen, Exergy: Energy, Environment and Sustainable Development, 2nd Ed. Elsevier, 2013.
  21. M. J. Moran, H. N. Shapiro, D. D. Boettner, and M. B. Bailey, Fundamentals of Engineering Thermodynamics, 8th ed. Hoboken, NJ, USA: Wiley, 2014.
  22. Y. A. Çengel and M. A. Boles, Thermodynamics: An Engineering Approach, 8th ed. New York, USA: McGraw-Hill Education, 2015.
  23. A. Bejan, Advanced Engineering Thermodynamics, 4th ed. Hoboken, NJ, USA: Wiley, 2016.
  24. R. Brignoli, J. S. Brown, H. M. Skye, and P. A. Domanski, “Refrigerant performance evaluation including effects of transport properties and optimized heat exchangers,” International Journal of Refrigeration, vol. 80, pp. 52–65, 2017, doi:10.1016/j.ijrefrig.2017.05.014.
  25. S. Bobbo, G. Di Nicola, C. Zilio, J. S. Brown, and L. Fedele, “Low GWP halocarbon refrigerants: A review of thermophysical properties,” International Journal of Refrigeration, vol. 90, pp. 181–201, 2018, doi: 10.1016/j.ijrefrig.2018.03.027.
  26. C. Höges et al., “Low-GWP refrigerants in heat pumps: An experimental investigation of the influence of an internal heat exchanger,” Energy Convers. Manag.: X, vol. 24, Art. no. 100704, 2024, doi: 10.1016/j.ecmx.2024.100704.
  27. Intergovernmental Panel on Climate Change (IPCC), Climate Change 2013: The Physical Science Basis. Contribution of Working Group I to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change [T. F. Stocker et al., Eds.]. Cambridge, United Kingdom: Cambridge University Press, 2013. doi: 10.1017/CBO9781107415324.
  28. United Nations Environment Programme (UNEP), “The Montreal Protocol on Substances that Deplete the Ozone Layer,” Nairobi, Kenya, 1987.
  29. European Commission, “Regulation (EU) No 517/2014 of the European Parliament and of the Council on fluorinated greenhouse gases,” Brussels, Belgium, 2014.
  30. ASHRAE, “ANSI/ASHRAE Standard 34-2019: Designation and safety classification of refrigerants,” 2019.
  31. E. W. Lemmon, I. H. Bell, M. L. Huber, and M. O. McLinden, “NIST Standard Reference Database 23: Reference Fluid Thermodynamic and Transport Properties-REFPROP, Version 10.0,” National Institute of Standards and Technology, Gaithersburg, MD, 2018. doi: 10.18434/T4/1502528.
  32. C. Höges, L. Wissing, C. Vering, and D. Müller, “Choosing the optimal refrigerant in heat pumps: Influence of the ecologic evaluation method,” Appl. Therm. Eng., vol. 263, Art. no. 125313, 2025, doi: 10.1016/j.applthermaleng.2024.125313.
  33. H. Deng, C.-H. Yeh, and R. J. Willis, “Inter-company comparison using modified TOPSIS with objective weights,” Computers & Operations Research, vol. 27, no. 10, pp. 963–973, 2000, doi:10.1016/S0305-0548(99)00069-6.
  34. D. Diakoulaki, G. Mavrotas, and L. Papayannakis, “Determining objective weights in multiple criteria problems: The CRITIC method,” Computers & Operations Research, vol. 22, no. 7, pp. 763–770, 1995, doi: 10.1016/0305-0548(94)00059-H.
  35. O. T. Amusan, N. I. Nwulu, and S. L. Gbadamosi, “Multi-criteria decision-based hybrid energy selection system using CRITIC weighted CODAS approach,” Sci. Afr., vol. 26, 2024, Art. no. e02372, doi: 10.1016/j.sciaf.2024.e02372.
  36. C.-L. Hwang and K. Yoon, Multiple Attribute Decision Making: Methods and Applications — A State-of-the-Art Survey (Lecture Notes in Economics and Mathematical Systems, vol. 186). Berlin, Heidelberg, Germany: Springer-Verlag, 1981.
  37. P. Yang, M. Yuan, Z. Liu, N. Xie, Y. Liu, and S. Yang, “Multi-objective optimization and life cycle assessment of a cascade system integrating LiBr/H2O absorption refrigeration with transcritical CO2 power cycle,” Energy Conversion and Management, vol. 244, Art. no. 114453, 2021, doi: 10.1016/j.enconman.2021.114453.
  38. P. Cui, M. Yu, Z. Liu, Z. Zhu, and S. Yang, “Energy, exergy, and economic (3E) analyses and multi-objective optimization of a cascade absorption refrigeration system for low-grade waste heat recovery,” Energy Conversion and Management, vol. 184, pp. 249–261, 2019, doi: 10.1016/j.enconman.2019.01.047.
  39. M. S. Turgut and O. E. Turgut, “Comparative investigation and multi objective design optimization of R744/R717, R744/R134a and R744/R1234yf cascade rerfigeration systems,” Heat and Mass Transfer, vol. 55, pp. 445–465, 2019, doi: 10.1007/s00231-018-2435-y.
  40. S. Opricović, "Multicriteria optimization of civil engineering systems,” Ph.D. dissertation, Faculty of Civil Eng., Univ. of Belgrade, Belgrade, Serbia, 1998.
  41. H. Taherdoost and M. Madanchian, “VIKOR Method—An Effective Compromising Ranking Technique for Decision Making,” Macro Management & Public Policies, vol. 5, no. 2, pp. 27–33, 2023, doi: 10.30564/mmpp.v5i2.5578.
  42. M. Keshavarz Ghorabaee, E. K. Zavadskas, L. Olfat, and Z. Turskis, “Multi-criteria inventory classification using a new method of evaluation based on distance from average solution (EDAS),” Informatica, vol. 26, no. 3, pp. 435–451, 2015, doi: 10.15388/Informatica.2015.57.
  43. M. Keshavarz Ghorabaee, E. K. Zavadskas, M. Amiri, and Z. Turskis, “Extended EDAS method for fuzzy multi-criteria decision-making: An application to supplier selection,” International Journal of Computers, Communications and Control, vol. 11, no. 3, pp. 358–371, 2016, doi: 10.15837/ijccc.2016.3.2557.