Journals / Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi / 2026 / Cilt: 22 Sayı: 1

The use of portable winch for forest harvesting operations in Pinus pinaster plantation areas

Sahilçamı (Pinus pinaster Ait.) plantasyon alanlarında el vincinin odun üretim çalışmalarında kullanımı

Tolga Öztürk(Istanbul University-Cerrahpaşa)0000-0002-3066-1788
Necmettin Şentürk(İstanbul Üniversitesi-Cerrahpaşa)0000-0002-6043-7488
Pages
1–8
Publication Date
2021-05-12
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Hourly fuel consumption of the hand winch was determined as 1.4 lt/h.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In parallel with the increase in the population in Turkey, there has been a significant increase in the amount of wood production in recent years.
📊
Key Findings & Data:This increase, which occurs in the amount of wood production, makes it imperative to innovate in production of forest products.
💡
Conclusion & Impact:Hourly fuel consumption of the hand winch was determined as 1.4 lt/h.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:El vinci · Sürütme · Odun üretimi

Abstract

In parallel with the increase in the population in Turkey, there has been a significant increase in the amount of wood production in recent years. This increase, which occurs in the amount of wood production, makes it imperative to innovate in production of forest products. Especially in wood production, the use of portable and low-cost new technologies and machines has become important. Among these machines, portable winches have been used in forest operations in the world and in Turkey as well in recent years. These winches are very useful machines in terms of installation and uninstallation. In this study, the use of portable winch in the Sahilçamı plantation areas within the boundaries of Sarıyer Forest Operation Directorate affiliated to the Istanbul Forest Regional Directorate has been examined. As a result of the studies, the hourly yield of the portable winch at an average skid distance of 50 meters was found as 1.110 m3/hr and the daily yield was found as 8.800 m3/day. Hourly fuel consumption of the hand winch was determined as 1.4 lt/h.

Özet

Ülke nüfusunun artışına paralel olarak odun üretim miktarlarında da son yıllarda önemli artışlar görülmektedir. Odun üretim miktarlarında ortaya çıkan bu artış üretim çalışmalarında da yeniliklere gitmeyi zorunlu kılmaktadır. Özellikle odun üretim çalışmalarında taşınabilir ve düşük maliyetli yeni teknolojilerin ve makinelerin kullanımı önemli bir durum almıştır. Bu makineler arasında el vinçleri son yıllarda ülkemizde ve dünya ormancılık çalışmalarında da kullanılmaya başlanmıştır. Bu vinçler kurulum ve sökülmesi yanında kullanım açısından da çok kullanışlı makinelerdir. Bu çalışmada, İstanbul Orman Bölge Müdürlüğü’ne bağlı Sarıyer Orman İşletme Şefliği sınırları içerisinde yer alan Sahilçamı plantasyon sahalarında el vincinin kullanımı incelenmiştir. Çalışmalar sonucunda el vincinin ortalama 50 metrelik sürütme mesafesinde saatlik verimi 1.10 m3/sa ve günlük verimi 8.80 m3/gün olarak bulunmuştur. El vincinin saatlik yakıt tüketimi ise 1.4 lt/sa olarak belirlenmiştir.

🔖

Cite This Article

Öztürk, T., Şentürk, N. (2021). The use of portable winch for forest harvesting operations in Pinus pinaster plantation areas. Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi, Cilt: 22 Sayı: 1, 1–8. https://doi.org/10.17474/artvinofd.774815

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Acar, H.H., Ünver-Okan, S., Üçüncü, K., 2015. Assessment on uphill yarding with the combination of log chute and portable winch. Eur. J. Forest Eng., 1(1): 34-40.
  2. Akay, A.E., Sert, M., Gülci, N., 2014. Hafif eğimli arazilerde benzinli el vinci ile bölmeden çıkarma çalışmalarının verim açısından değerlendirilmesi. II. Ulusal Akdeniz Orman ve Çevre Sempozyumu, 22-24 Ekim 2014, Isparta: 281-290. Aktekin, A.T., 2018. Odun üretim çalışmalarında verimlilik ve iş güvenliği üzerine teknik analizler. İstanbul Üniversitesi-Cerrahpaşa, Lisansüstü Eğitim Enstitüsü, Yüksek Lisans Tezi, İstanbul.
  3. Anonim, 2012. Sarıyer Orman İşletme Şefliği Amenajman Planı.
  4. Anonim, 2019. IBM SPSS istatistik programı (Kurulum CD’si).
  5. Gülci, N., Akay, A.E., Erdaş, O., 2014. Benzinli el vincinin odun hammaddesinin bölmeden çıkarılmasında kullanım imkanları. Orman Mühendisliği Dergisi, Ocak/Şubat/Mart Sayısı: 24-28.
  6. Gülci, N., Yüksel, K., Akay, A.E., 2017. Kar üzerinde odun hammaddesinin taşınabilir el vinci ile sürütülmesinin verim açısından değerlendirilmesi. Kastamonu Üniversitesi, Orman Fakültesi Dergisi, 17(1): 124-131.
  7. Gümüşay, O.O., 2006. Ekim Makinası İmalatında Zaman Etüdü. Ankara Üniversitesi Fen Bilimleri Enstitüsü, Yüksek Lisans Tezi, Ankara: 6-12.
  8. Hiesl, P., Benjamin, J.G., 2012. Cycle time analysis of harvesting equipment from an early commercial-thinning treatment in Maine. 35th Council on Forest Engineering Annual Meeting, New Bern, North Carolina, pp.1-14.
  9. LeDoux, C.B., Huyler, N.K., 2000. Cost comparisons for three harvesting systems operating in nrthern hardwood stands. USDA, Forest Services, Research Paper NE-715: 1-4.
  10. Mellgren, P.G., Claire, P., 1989. More reliable multi-function wood-harvesting machines in the future?. Journal of Forest Engineering, 1(1):17-22.
  11. McDonald, T.O., Fulton, J.P., 2005. Automated time study of skidder using global positioning system data. Computers and Electronics in Agriculture, 48: 19-37.
  12. Moskalik, T., Borz, S.A., Dvorak, J., Ferencik, M., Glushkov, S., Muiste, P., Lazdins, A., Styranivsky, O., 2017. Timber harvesting methods in eastern european countries: A review. Croat. J. For. Eng. 38(2): 231-241.
  13. Russell, F., Mortimer, D., 2005. A review of small-scale harvesting systems in use worldwide and their potential application in Irish forestry. National Council for Forest Research and Development, Ireland.
  14. Sticha, V., Holusa, J., Sloup, R., Macku, J., Trombik, J., 2018. A mobile hydraulic winch for use in small-scale forestry. Croat. J. For. Eng. 39(2): 205-212.