Journals / Mühendis ve Makina / 2026 / Cilt: 67 Sayı: 722

SURFACE ROUGHNESS OPTIMIZATION IN TURNİNG OF HARDENED AISI 4140 STEEL TAGUCHI L27 & EXCEL-BASED ANALYSIS

SERTLEŞTİRİLMİŞ AISI 4140 ÇELİĞİNİN TORNADA YÜZEY PÜRÜZLÜLÜĞÜ OPTİMİZASYONU TAGUCHİ L27 & EXCEL TABANLI ANALİZ

Pages
126–146
Publication Date
2026-03-30
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results indicate that feed rate has the greatest influence on surface roughness, contributing 66.46%.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study was carried out in the machining workshop of a company in Ankara that manufactures industrial and construction machinery.
📊
Key Findings & Data:It investigates the effects of cutting-parameter values on surface roughness during the turning of AISI 4140 steel.
💡
Conclusion & Impact:The results indicate that feed rate has the greatest influence on surface roughness, contributing 66.46%.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:AISI 4140 · Taguchi L27 · Üretimde İnovasyon Yönetimi

Abstract

This study was carried out in the machining workshop of a company in Ankara that manufactures industrial and construction machinery. It investigates the effects of cutting-parameter values on surface roughness during the turning of AISI 4140 steel. For the experimental procedure, the Taguchi L27 orthogonal array within the framework of Design of Experiments (DoE) was employed. The selected cutting parameters were cutting speed (60, 80, and 100 m/min), feed rate (0.18, 0.20, and 0.22 mm/rev), and depth of cut (1.00, 1.25, and 1.50 mm). To statistically analyze their effects on surface roughness (µm), tools such as Excel’s Data Analysis add-in and Solver were used. All tests were performed on a CNC lathe, and surface roughness measurements of the specimens—machined only by external turning—were taken with a Mitutoyo SJ-201 profilometer. The results indicate that feed rate has the greatest influence on surface roughness, contributing 66.46%. An optimization study showed that the best surface finish is achieved at a cutting speed of 100 m/min, a feed rate of 0.20 mm/rev, and a depth of cut of 1.00 mm.

Özet

Ankara’da iş ve inşaat makineleri üreten bir firmanın talaşlı imalat atölyesinde yapılan bu çalışma, AISI 4140 kalite çeliğinin torna operasyonu esnasında kesme parametreleri değerlerinin, yüzey pürüzlülüğüne etkilerini araştırmaktadır. Araştırma, deneysel yöntem için, Deneysel Tasarım (DoE) çerçevesinde Taguchi L27 ortogonal dizisini kullanmıştır. Kesme parametreleri olarak seçilen; kesme hızı (60, 80 ve 100 m/dk), ilerleme (0,18, 0,20 ve 0,22 mm/dev) ve kesme derinliğinin (1,00, 1,25 ve 1,50 mm), yüzey pürüzlülüğü (µm) üzerindeki etkilerini istatistiksel olarak analiz edebilmek için Excel Data Analysis ve Solver gibi araçlar kullanılmıştır. Deneyler CNC torna tezgahında yapılmıştır. Yalnızca dış çap tornalaması yapılan deney parçalarının yüzey pürüzlülük ölçümleri Mitutoyo SJ-201 model cihaz ile gerçekleştirilmiştir. Sonuçlar, ilerlemenin %66,46'lık bir katkı ile yüzey pürüzlülüğü üzerinde en önemli etkiye sahip olduğunu göstermektedir. Çalışmada, en iyi yüzey pürüzlülüğünü elde edebilmek için kesme hızının 100 m/dk, ilerlemenin 0,20 mm/dev ve kesme derinliğinin 1,00 mm olması gerektiğini gösterir bir optimizasyon çalışması yapılmıştır.

🔖

Cite This Article

Sarı, H. (2026). SURFACE ROUGHNESS OPTIMIZATION IN TURNİNG OF HARDENED AISI 4140 STEEL TAGUCHI L27 & EXCEL-BASED ANALYSIS. Mühendis ve Makina, Cilt: 67 Sayı: 722, 126–146. https://doi.org/10.46399/muhendismakina.1760886

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (29)

  1. Akyıl, H. H., & Bican, O. (2022). Talaşlı İmalatta Kesme Parametrelerinin Geometrik Toleranslar Üzerine Etkilerinin Deneysel Olarak İncelenmesi. Aksaray University Journal of Science and Engineering, 6(2), 107-122. Doi: https://doi.org/10.29002/asujse.1134933
  2. Asiltürk, İ., & Çunkaş, M. (2011). Modeling and prediction of surface roughness in turning operations using artificial neural network and multiple regression method. Expert Systems with Applications, 38(5), 5826–5832. Doi: https://doi.org/10.1016/j.eswa.2010.11.041
  3. Asiltürk, İ., Kuntoğlu, M., Binali, R., Akkuş, H. & Salur, E. (2023). A Comprehensive Analysis of Surface Roughness, Vibration, and Acoustic Emissions Based on Machine Learning during Hard Turning of AISI 4140 Steel. MDPI Metals, 13(437). Doi: https://doi.org/10.3390/met13020437
  4. Aydın, E. (2023). Taguchi Optimizasyon Metodunun İmalat Mühendisliği Alanında Kullanımı: Minitab Örneği. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 28(3). Doi: https://doi.org/10.17482/uumfd.1314990
  5. Erbaş, M. ve Güllü, A. (2025). AISI 4140 Malzemeye Uygulanan Kriyojenik İşlemin Sert Tornalama Operasyonunda Ayna ve Kater Titreşimi Üzerine Etkileri. Sinop Üniversitesi Fen Bilimleri Dergisi, 10(1), 134-148. Doi: https://doi.org/10.33484/sinopfbd.1672508
  6. Fedai, Y. (2022). AISI 4140 Çeliğinin Frezelemesinin Taguchi-DEAR Yöntemiyle Optimizasyonu. El-Cezerî Fen ve Mühendislik Dergisi, 9(2), 882-897. Doi: https://doi.org/10.31202/ecjse.1024895
  7. Gauri, S. K. & Pal, S. (2017). Optimization of multi-response dynamic systems using multiple regression-based weighted signal-to-noise ratio. SQC & OR Unit, Indian Statistical Institute. Doi: http://dx.doi.org/10.5267/j.ijiec.2016.6.001
  8. ISCAR ecatalog (2025). ISCAR Cutting Tools – WNMG-NR insert family. Erişim Adresi: https://www.iscar.com/eCatalog/Family.aspx?fnum=1009&mapp=IS&GFSTYP=M&srch=1.
  9. ISCAR ecatalog (2025). Grade IC 907–Carbide Cutting Tool Grade Data Sheet. Erişim Adresi: https://www.iscar.com/eCatalog/Grade.aspx?grade=IC907&item=5504877&fnum=869&mapp=IS&app=0.
  10. Kara, F., Özbek, O., Kam, M. ve Saruhan, H. (2017). AISI 4140 Islah Çeliğinin Tornalanmasında Yüzey Pürüzlülüğü ve Titreşimin Taguchi Metodu ile Optimizasyonu. Internatıonal Academıc Research Congress.
  11. Krishnaiah K. & Shahabudeen, P. (2012). Applied Design of Experiments and Taguchi Methods. New Delhi, India: PHI Learning Pvt. Ltd.
  12. Kumar, S. K., Senthilkumaar, J. S. & Srinivasan, A. (2013). Reducing Surface Roughness by Optimising the Turning Parameters. South African Journal of Industrial Engineering, 24(2), 78-87. Doi: https://doi.org/10.7166/24-2-593
  13. Kurt, M., Bağcı, E. & Kaynak, Y. (2009). Application of Taguchi methods in the optimization of cutting parameters for surface finish and hole diameter accuracy in dry drilling processes. The International Journal of Advanced Manufacturing Technology, 40, 458-469. Erişim Adresi: https://link.springer.com/article/10.1007/s00170-007-1368-2
  14. Loc, N. H. & Hung, T. Q. (2021). Optimization of Cutting Parameters on Surface Roughness and Productivity when Milling Wood Materials. Journal of Machine Engineering, 21(4), 72-89. Doi: https://doi.org/10.36897/jme/144426
  15. Nalbant, M., Gökkaya, H. ve Sur, G. (2007). Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning. Materials and Design, 28, 1379-1385. Doi: https://doi.org/10.1016/j.matdes.2006.01.008
  16. Özbek, O. ve Altan Özbek, N. (2016). Sertleştirilmiş AISI 4140 Çeliğinin Tornalanmasında Taguchi Yöntemi Kullanılarak Yüzey Pürüzlülüğü için Kesme Parametrelerinin Optimizasyonu. Journal of Advanced Technology Sciences.
  17. Özdemir, M., Şahinoğlu, A., Rafighi, M. & Yılmaz, V. (2022). Analysis and optimisation of the cutting parameters based on machinability factors in turning AISI 4140 steel. Canadian Metallurgical Quarterly. Doi: https://doi.org/10.1080/00084433.2022.2058154
  18. Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., Rafighi, M. & Sharma, P. (2023). Investigation on Surface Integrity in Hard Turning of AISI 4140 Steel with SPPP-AlTiSiN Coated Carbide Insert under Nano-MQL. MDPI Lubricants, 11(49). Doi: https://doi.org/10.3390/lubricants11020049
  19. Pınar, A. M. ve Fırat, K. (2016). AISI 4140 Çeliğin Çok Yönlü Takımla Tornalanmasında Yüzey Pürüzlülük Performansının Optimizasyonu. Journal of Polytechnic, 19(4), 491-498. Erişim Adresi: https://dergipark.org.tr/en/pub/politeknik/article/368276
  20. Ranganath M. S. (2013). Optimization of Process Parameters in Turning Operation Using Taguchi Method and Anova: A Review. International Journal of Advance Research and Innovation, 1, 31-45. Doi: https://doi.org/10.51976/ijari.111306
  21. Ranganath, M. S., Vipin & Mishra, R. S. (2013). Application of ANN for Prediction of Surface Roughness in Turning Process: A Review. International Journal of Advance Research and Innovation, 1(3), 118-123. Erişim Adresi: https://www.journalpressindia.com/download_article.php?jid=49&aid=1590
  22. Rathod, S. G., Mohite, S.S. & Yadav, M. H. (2017). Effects of Cutting Parameters on Cutting Force, Surface Roughness and MRR in Hard Turning of AISI 4140 Alloy Steel. Journal of Advances in Science and Technology, 13(1). Erişim Adresi: https://ignited.in/index.php/jast/article/view/2350/4518
  23. Roy, R., Ghosh, S. K., Kaisar, T. I., Ahmed, T., Hossain, S., Aslam, M., Kaseem, M. & Rahman, Md M. (2022). Multi-Response Optimization of Surface Grinding Process Parameters of AISI 4140 Alloy Steel Using Response Surface Methodology and Desirability Function under Dry and Wet Conditions. MDPI Coatings, 12(104). Doi: https://doi.org/10.3390/coatings12010104
  24. Sahoo, P. (2011). Optimization of Turning Parameters for Surface Rougness Using RSM and GA. Advances in Production Engineering & Management, 6(3), 197-208. Erişim Adresi: https://apem-journal.org/Archives/2011/APEM6-3_197-208.pdf
  25. Saidat, S., Junoh, A. K., Muhamad, W. Z. A. W & Yahya, Z. (2020). Determination of flexibility of workers working time through Taguchi method approach. TELKOMNIKA Telecommunication, Computing, Electronics and Control, 18(5), 2764-2771. Erişim Adresi: https://www.telkomnika.uad.ac.id/index.php/TELKOMNIKA/article/viewFile/13979/8963
  26. Tan, N. N., Viet, P. T. & Minh, N. N. (2023). Optimization of Cutting Parameters in Turning Operation Using RSM. International Journal of Scientific Engineering and Science, 7(5), 66-70. Erişim Adresi: https://ijses.com/wp-content/uploads/2023/05/163-IJSES-V7N5.pdf
  27. Yaka, H., Uğur, L ve Akkuş, H. (2016). AISI 1040 Çeliğinin Tornalanmasında Yüzey Pürüzlülüğünün Çoklu Regresyon ile İncelenmesi. Afyon Kocatepe University Journal of Science and Engineering, 16, 770-775. Erişim Adresi: https://fenbildergi.aku.edu.tr/wp-content/uploads/2016/12/035901-770-775.pdf
  28. Zhang, W. (2025). Research on Industrial Production Process Optimization and Quality Control Methods Based on Intelligent Manufacturing Technology. Techforum Journal, (3), 52-67. Doi: https://doi.org/10.71448/tk202535
  29. Zhujani, F., Todorov, G., Kamberov, K. & Abdullahu, F. (2023). Mathematical modeling and optimization of machining parameters in CNC turning process of Inconel 718 using the Taguchi method. Elsevier B.V. on behalf of Kuwait University. Doi: https://doi.org/10.1016/j.jer.2023.10.029