SavedAdd your journal

Journals / Fırat Üniversitesi Mühendislik Bilimleri Dergisi / 2026 / Cilt: 38 Sayı: 1

Numerical Assessment of Multi-Cell Thin-Walled Beams under Three-Point Bending for Automotive Safety

Otomotiv Güvenliği Açısından Çok Hücreli İnce Duvarlı Kirişlerin Üç Nokta Bükülme Altında Sayısal Değerlendirilmesi

Mehmet Kopar(OSTIM TECHNICAL UNIVERSITY)0000-0001-7347-4192
Medeni Sömer(HITIT UNIVERSITY)0000-0003-4411-3309
Ali Arı(OSTİM TEKNİK ÜNİVERSİTESİ, MESLEK YÜKSEKOKULU)0000-0003-2702-2982
Pages
201–212
Publication Date
2026-03-29
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The findings indicate that multicellular thin-walled structures offer significant advantages over traditional single-cell designs, providing up to 27-42% improvement in crash performance and are an effective design strategy for lightweight automotive safety components.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the impact strength of automotive side door beams reinforced with multi-cell thin-walled structures was investigated under three-point bending loads.
📊
Key Findings & Data:Six different configurations (cylindrical and square outer geometries with 3, 4, and 5 inner cells) made of AA6063-T1 aluminum alloy were analyzed using the finite element method.
💡
Conclusion & Impact:The findings indicate that multicellular thin-walled structures offer significant advantages over traditional single-cell designs, providing up to 27-42% improvement in crash performance and are an effective design strategy for lightweight automotive safety components.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Üç nokta eğme testi · enerji emilimi · çarpışma dayanıklılığı

Abstract

In this study, the impact strength of automotive side door beams reinforced with multi-cell thin-walled structures was investigated under three-point bending loads. Six different configurations (cylindrical and square outer geometries with 3, 4, and 5 inner cells) made of AA6063-T1 aluminum alloy were analyzed using the finite element method. The models developed in HyperMesh were validated with the experimental data of Zhang and Fu, and an error of less than 1.1% was achieved. The results revealed that increasing the number of inner cells significantly increased the energy absorption, average crushing force, and specific energy absorption. The square-profile K5 design achieved the best performance with 0.1617 kJ EA and 0.885 kJ/kg SEA, outperforming its cylindrical counterpart (S5) by 43% and 13%, respectively. The square geometries also exhibited a 69% higher peak crushing force due to their superior vertical load-carrying behavior. The findings indicate that multicellular thin-walled structures offer significant advantages over traditional single-cell designs, providing up to 27-42% improvement in crash performance and are an effective design strategy for lightweight automotive safety components.

Özet

Bu çalışmada, çok hücreli ince duvarlı yapılarla güçlendirilmiş otomotiv yan kapı kirişlerinin üç noktalı bükülme yükleri altında çarpma dayanıklılığı araştırılmıştır. AA6063-T1 alüminyum alaşımından yapılmış altı farklı konfigürasyon (3, 4 ve 5 iç hücreli silindirik ve kare dış geometriler) sonlu elemanlar yöntemi kullanılarak analiz edilmiştir. HyperMesh'te geliştirilen modeller, Zhang ve Fu'nun deneysel verileriyle doğrulanmış ve %1,1'den daha az hata elde edilmiştir. Sonuçlar, iç hücrelerin sayısının arttırılmasının enerji emilimini, ortalama kırma kuvvetini ve spesifik enerji emilimini önemli ölçüde arttırdığını ortaya çıkarmıştır. Kare profilli K5 tasarımı, 0,1617 kJ EA ve 0,885 kJ/kg SEA ile en iyi performansı elde ederek silindirik muadilini (S5) sırasıyla % 43 ve %13 oranında daha iyi değerlere sahip olduğu belirlenmiştir. Kare geometriler ayrıca üstün dikey yük taşıma davranışı nedeniyle % 69 daha yüksek tepe kırma kuvveti göstermiştir. Bulgular, çok hücreli güçlendirilmiş kare yapıların, geleneksel tek hücreli tasarımlara göre önemli avantajlar sunduğunu, çarpışma performansında %27-42'ye kadar iyileşme sağladığını ve hafif otomotiv güvenlik bileşenleri için etkili bir tasarım stratejisi olduğu belirlenmiştir.

🔖

Cite This Article

Kopar, M., Sömer, M., Arı, A. (2026). Numerical Assessment of Multi-Cell Thin-Walled Beams under Three-Point Bending for Automotive Safety. Fırat Üniversitesi Mühendislik Bilimleri Dergisi, Cilt: 38 Sayı: 1, 201–212. https://doi.org/10.35234/fumbd.1790146

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (40)

  1. Tarlochan F. Sandwich structures for energy absorption applications: A review. Materials 2021;14(16):Article 16. doi:10.3390/ma14164731
  2. Yang J, et al. Laser additive manufacturing of bio-inspired metallic structures. Chin J Mech Eng Addit Manuf Front 2022;1(1):100013. doi:10.1016/j.cjmeam.2022.100013
  3. Zhang W, Xu J, Yu TX. Dynamic behaviors of bio-inspired structures: Design, mechanisms, and models. Eng Struct 2022;265:114490. doi:10.1016/j.engstruct.2022.114490
  4. Zou Y, Fu J, Chen Z, Ren L. The effect of microstructure on mechanical properties of corn cob. Micron 2021;146:103070. doi:10.1016/j.micron.2021.103070
  5. Yao SN. Equalization in ambisonics. Appl Acoust 2018;139:129–139. doi:10.1016/j.apacoust.2018.04.027
  6. Yao S, Li Z, Ma W, Xu P. Crashworthiness analysis of a straight-tapered shrink tube. Int J Mech Sci 2019;157–158:512–527. doi:10.1016/j.ijmecsci.2019.04.058
  7. Andrews KRF, England GL, Ghani E. Classification of the axial collapse of cylindrical tubes under quasi-static loading. Int J Mech Sci 1983;25(9):687–696. doi:10.1016/0020-7403(83)90076-0
  8. Kopar M, Yıldız AR. Experimental and numerical investigation of crash performances of additively manufactured novel multi-cell crash box made with CF15PET, PLA, and ABS. Mater Test 2024;66(9):1510–1518. doi:10.1515/mt-2024-0100
  9. Xie S, Jing K, Zhou H, Liu X. Mechanical properties of Nomex honeycomb sandwich panels under dynamic impact. Compos Struct 2020;235:111814. doi:10.1016/j.compstruct.2019.111814
  10. Xu X, Zhang Y, Chen X, Liu Z, Xu Y, Gao Y. Crash behaviors of hierarchical sandwich-walled columns. Int J Mech Sci 2019;161–162:105021. doi:10.1016/j.ijmecsci.2019.105021
  11. Li QQ, Li E, Chen T, Wu L, Wang GQ, He ZC. Improve the frontal crashworthiness of vehicle through the design of front rail. Thin-Walled Struct 2021;162:107588. doi:10.1016/j.tws.2021.107588
  12. Huang Z, Zhang X. Crashworthiness and optimization design of quadruple-cell aluminum/CFRP hybrid tubes under transverse bending. Compos Struct 2020;235:111753. doi:10.1016/j.compstruct.2019.111753
  13. Wang H, Tan D, Liu Z, Yin H, Wen G. On crashworthiness of novel porous structure based on composite TPMS structures. Eng Struct 2022;252:113640. doi:10.1016/j.engstruct.2021.113640
  14. Zhang XW, Zhang QM, Ren XJ. Theoretical study on the dynamic compression and energy absorption of porous materials filled with magneto-rheological fluid. Int J Impact Eng 2022;161:104105. doi:10.1016/j.ijimpeng.2021.104105
  15. Huang L, et al. Bionic composite metamaterials for harvesting of microwave and integration of multifunctionality. Compos Sci Technol 2021;204:108640. doi:10.1016/j.compscitech.2020.108640
  16. Ha NS, Pham TM, Chen W, Hao H, Lu G. Crashworthiness analysis of bio-inspired fractal tree-like multi-cell circular tubes under axial crash. Thin-Walled Struct 2021;169:108315. doi:10.1016/j.tws.2021.108315
  17. Hu J, Luo Y, Liu S. Two-scale concurrent topology optimization method of hierarchical structures with self-connected multiple lattice-material domains. Compos Struct 2021;272:114224. doi:10.1016/j.compstruct.2021.114224
  18. Lucarini S, Cobian L, Voitus A, Segurado J. Adaptation and validation of FFT methods for homogenization of lattice based materials. Comput Methods Appl Mech Eng 2022;388:114223. doi:10.1016/j.cma.2021.114223
  19. Ma W, Li Z, Xie S. Crashworthiness analysis of thin-walled bio-inspired multi-cell corrugated tubes under quasi-static axial loading. Eng Struct 2020;204:110069. doi:10.1016/j.engstruct.2019.110069
  20. Tran T, Hou S, Han X, Chau M. Crash analysis and numerical optimization of angle element structures under axial impact loading. Compos Struct 2015;119:422–435. doi:10.1016/j.compstruct.2014.09.019
  21. Fan Z, Lu G, Liu K. Quasi-static axial compression of thin-walled tubes with different cross-sectional shapes. Eng Struct 2013;55:80–89. doi:10.1016/j.engstruct.2011.09.020
  22. Xiang J, Du J, Li D, Scarpa F. Numerical analysis of the impact resistance in aluminum alloy bi-tubular thin-walled structures designs inspired by beetle elytra. J Mater Sci 2017;52(22):13247–13260. doi:10.1007/s10853-017-1420-z
  23. Kim TH, Reid SR. Bending collapse of thin-walled rectangular section columns. Comput Struct 2001;79(20):1897–1911. doi:10.1016/S0045-7949(01)00089-X
  24. Huang Z, Zhang X. Three-point bending collapse of thin-walled rectangular beams. Int J Mech Sci 2018;144:461–479. doi:10.1016/j.ijmecsci.2018.06.001
  25. Jiang P, Wang Q, Yin A, Hu J, Gu X. Optimization design for foam-filled double cylindrical tubes under multiple lateral impacts. Adv Mech Eng 2018;10(12):1687814018811239. doi:10.1177/1687814018811239
  26. Hwang YH, Han JH. Crashworthiness of energy absorbing structures under combined shear-compression loading: Effects of materials and geometries. Int J Aeronaut Space Sci 2025;26(2):615–628. doi:10.1007/s42405-024-00779-5
  27. H. Taghipoor, A. Eyvazian, F. Musharavati, T. A. Sebaey, ve A. Ghiaskar, “Experimental investigation of the three-point bending properties of sandwich beams with polyurethane foam-filled lattice cores”, Structures, c. 28, ss. 424-432, Ara. 2020, doi: 10.1016/j.istruc.2020.08.082.
  28. Gong C, Bai Z, Lv J, Zhang L. Crashworthiness analysis of bionic thin-walled tubes inspired by the evolution laws of plant stems. Thin-Walled Struct 2020;157:107081. doi:10.1016/j.tws.2020.107081
  29. Halis S, Altın M. Numerical investigation of energy absorption performance in thin-walled structure under three-point bending test. Int J Automot Sci Technol 2024;8(1):Article 1. doi:10.30939/ijastech.1434645
  30. Albak Eİ. Optimization for multi-cell thin-walled tubes under quasi-static three-point bending. J Braz Soc Mech Sci Eng 2022;44(5):207. doi:10.1007/s40430-022-03525-8
  31. Zheng D, Zhang J, Lu B, Zhang T. Energy absorption of fully clamped multi-cell square tubes under transverse loading. Thin-Walled Struct 2021;169:108334. doi:10.1016/j.tws.2021.108334
  32. Gliszczyński A, Czechowski L. Collapse of channel section composite profile subjected to bending. Part I: Numerical investigations. Compos Struct 2017;178:383–394. doi:10.1016/j.compstruct.2017.07.033
  33. Zhang X, Fu X. New theoretical models for the bending moment of thin-walled beams under three-point bending. Appl Math Model 2023;121:21–42. doi:10.1016/j.apm.2023.04.015
  34. Huang Z, Li Y, Zhang X, Chen W, Fang D. A comparative study on the energy absorption mechanism of aluminum/CFRP hybrid beams under quasi-static and dynamic bending. Thin-Walled Struct 2021;163:107772. doi:10.1016/j.tws.2021.107772
  35. Kim HC, Shin DK, Lee JJ. Characteristics of aluminum/CFRP short square hollow section beam under transverse quasi-static loading. Compos Part B Eng 2013;51:345–358. doi:10.1016/j.compositesb.2013.03.020
  36. Tang Z, Liu S, Zhang Z. Analysis of energy absorption characteristics of cylindrical multi-cell columns. Thin-Walled Struct 2013;62:75–84. doi:10.1016/j.tws.2012.05.019
  37. Chen T, Zhang Y, Lin J, Lu Y. Theoretical analysis and crashworthiness optimization of hybrid multi-cell structures. Thin-Walled Struct 2019;142:116–131. doi:10.1016/j.tws.2019.05.002
  38. Papaiya V, Schuster J, Shaik YP. Development of a side door composite impact beam for the automotive industry. Open J Compos Mater 2024;14(1):Article 1. doi:10.4236/ojcm.2024.141001
  39. O. Gülcan, “Crashworthiness of laser powder bed fusion processed In718 auxetic metamaterials”, J. Braz. Soc. Mech. Sci. Eng., c. 46, sy 7, s. 414, Haz. 2024, doi: 10.1007/s40430-024-04927-6.
  40. Halis S, Altın M. Numerical investigation of energy absorption performance in thin-walled structure under three-point bending test. Int J Automot Sci Technol 2024;8(1):Article 1. doi:10.30939/ijastech.1434645