SavedAdd your journal

Journals / Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi / 2026 / Cilt: 25 Sayı: 2

GÖZENEKLİ MALZEMELERİN ETKEN ISIL İLETKENLİKLERİ ÜZERİNE MEVCUT ÇALIŞMALAR

Numan Yüksel
Atakan Avcı
Pages
—
Publication Date
2013-02-15
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Sonuçlar tablo halinde verilmiş ve modeller,uygulanabilirlik aralığı, kullanım kolaylığı ile değişik parametrelerin etkileri açısından değerlendirilmiştir.Sonuçta genel olarak kullanılabilecek bağıntılar elde etmek yerine belirli yapılarda ve belirli gözeneklilikaralığında sınırlı bir hata töleransı ile kullanılabilecek bağıntıları seçmenin önem kazandığı ve özellikle yükseksıcaklığın etken ısıl iletkenliğine etkisinin çalışılması gerektiği sonucuna varılmıştır.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Bu çalışmada, gözenekli maddelerin etken ısıl iletkenliğinin modellenmesine ve/veya tahminine yönelikliteratürde mevcut çalışmalar incelenmiştir.
📊
Key Findings & Data:Bu çalışmalar, literatürde tespit edilen ve farklı uygulamalarıkapsayan bazı deneysel sonuçlar dikkate alınarak analiz edilmiştir.
💡
Conclusion & Impact:Sonuçlar tablo halinde verilmiş ve modeller,uygulanabilirlik aralığı, kullanım kolaylığı ile değişik parametrelerin etkileri açısından değerlendirilmiştir.Sonuçta genel olarak kullanılabilecek bağıntılar elde etmek yerine belirli yapılarda ve belirli gözeneklilikaralığında sınırlı bir hata töleransı ile kullanılabilecek bağıntıları seçmenin önem kazandığı ve özellikle yükseksıcaklığın etken ısıl iletkenliğine etkisinin çalışılması gerektiği sonucuna varılmıştır.
🔬Design:Review & Systematic Survey
📍Scope:Comprehensive Sample
⚙️Variables:Isıl iletkenlik · gözenekli malzeme · matematik model.

Özet

Bu çalışmada, gözenekli maddelerin etken ısıl iletkenliğinin modellenmesine ve/veya tahminine yönelikliteratürde mevcut çalışmalar incelenmiştir. Bu çalışmalar, literatürde tespit edilen ve farklı uygulamalarıkapsayan bazı deneysel sonuçlar dikkate alınarak analiz edilmiştir. Sonuçlar tablo halinde verilmiş ve modeller,uygulanabilirlik aralığı, kullanım kolaylığı ile değişik parametrelerin etkileri açısından değerlendirilmiştir.Sonuçta genel olarak kullanılabilecek bağıntılar elde etmek yerine belirli yapılarda ve belirli gözeneklilikaralığında sınırlı bir hata töleransı ile kullanılabilecek bağıntıları seçmenin önem kazandığı ve özellikle yükseksıcaklığın etken ısıl iletkenliğine etkisinin çalışılması gerektiği sonucuna varılmıştır.

🔖

Cite This Article

Yüksel, N., Avcı, A. (2013). GÖZENEKLİ MALZEMELERİN ETKEN ISIL İLETKENLİKLERİ ÜZERİNE MEVCUT ÇALIŞMALAR. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, Cilt: 25 Sayı: 2. https://ajindex.com/articles/1078607

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (408)

  1. KAYNAKLAR (REFERENCES)
  2. Bart, G. C. J., Thermal conduction in non
  3. homogeneous and phase change media,
  4. Doctoral Thesis, Delft University of Technology,
  5. The Netherlands, 1994.
  6. Pham, Q.T. ve Willix, J., “Thermal conductivity
  7. of fresh lamb meat, offal and fat in the range -40
  8. to +30 oC: measurements and correlations”, J.
  9. Food Sci., 54 (3), 508–515,1989.
  10. Singh, R.ve Kasana, H.S., “Computational aspects of
  11. effective thermal conductivity of highly porous metal
  12. foams”, Applied Thermal Engineering, 24, 1841–, 2004
  13. Tavman, I.H., “Effective Thermal Conductivity
  14. of Isotropic Polymer Composites”, Int. Comm.
  15. Heat Mass Transfer, 25(5), 723-732, 1998.
  16. Belova, I.V. ve Murch, G.E., “Monte Carlo
  17. Simulation of the Effective Thermal Conductivity
  18. in Two-Pase Material”, Journal of Materials
  19. Processing Technology, 153-154, 741-745,
  20. Ochs, F., Heidemann, W. ve Müller-Steinhagen,
  21. H., “Effective Thermal Conductivity of
  22. Moistened Insulation Materials As A Function of
  23. Temperature”, International Journal of Heat
  24. and Mass Transfer, 51, 539–552, 2008.
  25. Maqsood, A. ve Kamran, K., “Thermophysical
  26. properties of porous sandstones: measurements
  27. and comparative study of some representative
  28. thermal conductivity models”, International
  29. Journal of Thermophysics,; 26 (5), 1617-1631,
  30. Cernuschi, F., Ahmaniemi, S., Vuoristo, P. ve
  31. Mäntylä, T., “Modelling of thermal conductivity
  32. of porous materials: application to thick thermal
  33. barrier coatings”, Journal of the European
  34. Ceramic Society, 24, 2657-2667, 2004.
  35. Singh, K.J., Singh, R. ve Chaudhary, D.R., “Heat
  36. conduction and a porosity correction term for
  37. spherical and cubic particles in a simple cubic
  38. packing”, J. Phys. D: Appl. Phys., 31, 1681–, 1998.
  39. Kohout, M., Collier, A.P. ve Štĕpánek, F.,
  40. “Effective thermal conductivity of wet particle
  41. assemblies”, International Journal of Heat and
  42. Mass Transfer, 47, 5565–5574, 2004.
  43. Chaudhary, D. R. ve Bhandari, R. C., “Heat transfer
  44. through a three-phase porous medium”, Journal of
  45. Physics D, British Journal of Applied Physics, 1,
  46. 817, 1968.
  47. Maxwell, J.C., A Treatise on Electricity and
  48. Magnetism, third ed, Dover Publications Inc.,
  49. New York, A.B.D., 1954.
  50. Beck, A.E., “An improved method of computing
  51. the thermal conductivity of fluid-filled
  52. sedimentary rocks'”, Geophysics, 41, 133-144,
  53. Carson, J. K., Lovatt, S. J., Tanner, D. J. ve
  54. Cleland, A.C., “Thermal Conductivity Bounds for
  55. Isotropic Porous Materials”, International
  56. Journal of Heat and Mass Transfer,48, 2150-, 2005.
  57. Brailsford, A.D. ve Major, K.G., “The thermal
  58. conductivity of aggregates of several phases,
  59. including porous materials”, Br. J. Appl. Phys.,, 313–319, 1964.
  60. Carson, J. K., Lovatt, S.J., Tanner, D.J. ve
  61. Cleland, A.C., “Predicting the effective thermal
  62. conductivity of unfrozen, porous foods”, Journal
  63. of Food Engineering, 75, 297–307, 2006.
  64. Carson, J. K., “Review of effective thermal
  65. conductivity models for foods”, International
  66. Journal of Refrigeration, 29, 958-967, 2006.
  67. Carson, J. K., Prediction of the thermal
  68. conductivity of porous foods, PhD Thesis,
  69. Massey University, Palmerston North, New
  70. Zealand, 2002.
  71. Carson, J. K., Lovatt, S. J., Taner, D.J. ve
  72. Cleland, A.C., “An analysis of the influence of
  73. material structure on the effective thermal
  74. conductivity of theoretical porous materials using
  75. finite element simulations”, International
  76. Journal of Refrigeration, 26, 873–880, 2003.
  77. Nielsen, L.E., Mechanical Properties of
  78. Polymers and Composites, Vol. 2., Marcel
  79. Dekker, New York, 1974.
  80. Nielsen, L. E., “Thermal conductivity of
  81. particulate-filled polymers”, J. Appl. Polym.
  82. Sci., 17, 3819-3825, 1973.
  83. Pezzotti, G., Kamada, I. ve Miki, S., “Thermal
  84. conductivity of AlN/polystyrene interpenetrating
  85. Networks”, Journal of the European Ceramic
  86. Society, 20, 1197-1203, 2000.
  87. Gonzo, E. E., “Estimating correlations for the
  88. effective thermal conductivity of granular
  89. materials”, Short communication, Chemical
  90. Engineering Journal, 90, 299–302, 2002.
  91. Ghodoossi, L., Hava Boşluklu Yapı
  92. Elemanlarında Isı Geçişi, Master Tezi, İstanbul
  93. Teknik Üniversitesi, Fen Bilimleri Enstitüsü,
  94. Makine Mühendisliği Ana Bilimdalı, İstanbul,, 1988.
  95. Fu, S.-Y. ve Mai, Y.-W., “Thermal Conductivity
  96. of Misaligned Short-Fiber-Reinforced Polymer
  97. Composites”, Journal of Applied Polymer
  98. Science, 88, 1497–1505, 2003.
  99. Halpin, J.C., “Stiffness and expansion estimates
  100. for oriented short fiber composites”, Journal of
  101. Composite Materials, 3, 732–734, 1969.
  102. Gemci, R., Lif takviyeli polimer kompozit
  103. malzemelerde aşınma ve ısı iletimlerinin
  104. iyileştirilmesi, Doktora Tezi, Uludağ
  105. Üniversitesi, Fen Bilimleri Enstitüsü, Tekstil
  106. Mühendisliği Anabilim dalı, Bursa, 102, 1996.
  107. Agarwal, B.D., Broutman L.J. Analysis and
  108. Performance of Fiber Composites, John Wiley
  109. and Sons, U.S.A., 1980.
  110. Levy, F.L., “A modified Maxwell–Eucken
  111. equation for calculating the thermal conductivity of two-component solutions or mixtures”,
  112. International Journal of Refrigeration, 4(4),
  113. 225, 1981.
  114. Becker, B.R. ve Fricke, B.A., “Food
  115. thermophysical property models”, Int. Comm.
  116. Heat Mass Transfer, 26 (5), 627-636, 1999.
  117. Wang, J., Carson, J.K., North, M.K. ve Cleland
  118. D.J., “A New Approach to Modelling The
  119. Effective Thermal Conductivity of
  120. Heterogeneous Materials”, International
  121. Journal of Heat and Mass Transfer, 49, 3075-, 2006.
  122. Landauer, R., “The electrical resistance of binary
  123. metallic mixtures”, J. Appl. Phys., 23, 779–784,
  124. Kirkpatrick, S., “Percolation and conduction”,
  125. Reviews of Modern Physics, 45, 574–588, 1973.
  126. Davis, H.T., Valencourt, L.R. ve Johnson, C.E.,
  127. “Transport processes in composite media”, J.
  128. Am. Ceram. Soc., 58, 446-452, 1975.
  129. Xue, Q. ve Xu, W.-M., “A Model of Thermal
  130. Conductivity of Nanofluids with Interfacial
  131. Shells”, Materials Chemistry and Physics, 90,
  132. 301, 2005.
  133. Krischer, O., The scientific fundamentals of drying
  134. technology, Springer-Verlag, Berlin, 1963.
  135. Hamdami, N., Monteau, J.-Y. ve Le Bail, A.,
  136. “Effective thermal conductivity of a high porosity
  137. model food at above and sub-freezing
  138. temperatures”, International Journal of
  139. Refrigeration, 26, 809–816, 2003.
  140. Maroulis, Z.B., Krokida, M.K. ve Rahman, M.S.,
  141. “Astructural generic model to predict the
  142. effective thermal conductivity of fruits and
  143. vegetables during drying”, J. Food Eng., 52, 47–, 2002.
  144. De Vries, U., Sluimer, P.ve Bloksma, A.H., “A
  145. quantitative model for heat transport in dough and
  146. crumb during baking”, International Symposium
  147. on Cereal Science and Technology, Lund
  148. University, Ystad, Sweden, 174–88, 13–16 June
  149. Russell, H.W., “Principles of Heat Flow in
  150. Porous Insulators”, J. Am. Ceram. Soc., 18, 1-5,
  151. Tseng, C., Yamaguchit, M.ve Ohmorit, T.,
  152. “Thermal Conductivity of Polyurethane Foams
  153. from Room Temperature to 20 K”, Cryogenics,, 305-312, 1997.
  154. Chiew, Y.C. ve Glandt, E., “The effect of
  155. structure on the conductivity of a dispersion”, J.
  156. Coll. Interf. Sci., 94, 90–104, 1983.
  157. Francl, J. ve Kingery, W.D., “Thermal conductivity:
  158. IX, Experimental investigation of effect of porosity
  159. on thermal conductivity”, J. Am. Ceram. Soc., 37,
  160. 107, 1954.
  161. Sheldon, R.P., Composite polymeric materials,
  162. Applied Science Publishers, London and New
  163. York, 86-88, 1982.
  164. Chawla, K.K., Composite Materials-Science and
  165. Engineering, Springer-Verlag, 1987.
  166. Ozilgen, M., Food Process Modeling and
  167. Control: Chemical Engineering Applications,
  168. CRC Press, 518, 1998.
  169. Hill, J.E., Leitman, J.D. ve Sunderland, J.E.,
  170. “Thermal conductivity of various meats”, Food
  171. Technology, 21, 1143–1148, 1967.
  172. Rizvi, S.S.H., Thermodynamic Properties in
  173. Dehydration, Editör: Rao, M.A. ve Rizvi, S.S.H.,
  174. Engineering Properties of Foods, Marcel Dekker,
  175. Newyork, 531, 1994.
  176. Ashrae Handbook, Refrigeration, American
  177. Society of Heating, Refrigeration and Airconditioning
  178. Engineers Inc., GA, Atlanta, 2002.
  179. Rahman, M.S., Thermophysical properties of
  180. foods, Editör: Sun, D.-W., Advances in food
  181. refrigeration, Leatherhead Publishing, Surrey,
  182. England, 2001.
  183. Kopelman, I. J., Transient heat transfer and
  184. thermal properties in food systems, Doktora
  185. Tezi, Food Science Departmant, Michigan State
  186. University, East Lansing, MI, U.S.A., 1966.
  187. Jeffrey, D.J., “Conduction through a random
  188. suspension of spheres”, Proc. R. Soc. Lond. A,, 355–367, 1973.
  189. Xue, Q.-Z., “Model for effective thermal
  190. conductivity of nanofluids”, Physics Letters
  191. A,307 (5-6), 313–317, 2003.
  192. Bauer, T.H., “A general analytical approach
  193. toward the thermal conductivity of porous
  194. media”, Int. J. Heat Mass Transfer, 36, 4181–, 1993.
  195. Babanov, A.A., “Method of calculation of
  196. thermal conduction coefficient of capillary
  197. porous material”, Sov. Phys. Technol. Phys., 2,
  198. 484, 1957.
  199. Ye, Z., Wells, C.M., Carrington, C.G. ve Hewitt,
  200. N.J., “Thermal Conductivity of Wool and Wool-Hemp
  201. Insulation”, International Journal of Energy
  202. Research, 30, 37-49, 2006.
  203. Symons, J.G., Clarke, R.E. ve Pierce, J.V.,
  204. “Thermal performance of several Australian
  205. fibrous insulating materials”, Journal of
  206. Thermal Insulation and Building
  207. Envelopes,19, 72–88, 1995.
  208. “Microstructure and transport properties of wet
  209. poly-disperse particle assemblies”, Powder
  210. Technology, 156, 120–128, 2005.
  211. Cheng, S.C. ve Vachon, R.I., "The Prediction of the
  212. Thermal Conductivity of Two and Three Phase Solid
  213. Heterogeneous Mixtures”, Int.J. Heat Mass
  214. Transfer, 12, 249, 1969.
  215. Agari, Y., Uno, T., “Estimation on Thermal
  216. Conductivities of Filled Polymers”, J. Appl.
  217. Polym. Sci., 32, 5705-5712, 1986.
  218. Gori, F., “A Theoretical Model for Predicting the
  219. Effective Thermal Conductivity of Unsaturated
  220. Frozen Soils”, Proceedings of The 4th International Conference on Permafrost, vol., Editör: Péwé, T. L., Washington DC: National
  221. Academy Press, Fairbanks, U.S.A., 363-368,
  222. Gori, F., Marino, C. ve Pietrafesa, M., “Experimental
  223. measurements and theoretical predictions of the
  224. thermal conductivity of two phases glass beads”,
  225. International communications in heat and mass
  226. transfer, 28 (8), 1091-1102 (17), 2001.
  227. Barea, R., Osendi, M.I., Ferreira, J.M.F. ve
  228. Miranzo, P. “Thermal conductivity of highly
  229. porous mullite material”, Acta Materialia, 53,
  230. 3318, 2005.
  231. Singh, J. R., “Effective thermal conductivity of
  232. highly porous two-phase systems”, Applied
  233. Thermal Engineering, 24, 2727–2735, 2004.
  234. Argento, C. ve Bouvard, D., “Modeling the
  235. effective thermal conductivity of random packing
  236. of spheres through densification”, Int. J. Heat
  237. Mass Transfer, 39, 1343–1350, 1996.
  238. Tichá, G., Pabst, W. ve Smith, D.S., “Predictive
  239. model for the thermal conductivity of porous
  240. materials with matrix-inclusion type
  241. microstructure”, Journal of Materials Science
  242. (Letters), 40 (18), 5045-5047, 2005.
  243. Baschirow, A.B. ve Selenew, J.W., “Thermal
  244. Conductivity of Composites”, Plaste Kaut, 23,, 1976.
  245. Bruggeman, D.A.G., “Calculation of physical
  246. constants from heterogeneous substances”,
  247. Annals of Physics, 24, 636, 1935.
  248. Schulz, B., “Thermal conductivity of porous and
  249. highly porous materials”, High Temperature-
  250. High Pressures., 13, 649-660, 1981.
  251. Meredith, R.E. ve Tobias, C.W., Conduction in
  252. heterogeneous systems, Editör: Tobias, C.W.,
  253. Advances in Electrochemistry and
  254. Electrochemical Engineering, vol. 2, Interscience
  255. Publisher, Newyork, 15-47, 1962.
  256. Coble, R.L., Kingery, W.D., “Effect of porosity
  257. on physical properties of sintered alumina”, J.
  258. Am. Ceram. Soc., 39, 377–384, 1956.
  259. Pabst, W., “Simple second-order expression: For the
  260. porosity dependence of thermal conductivity”,
  261. Journal of Materials Science, 40 (9-10), 2667-
  262. , 2005.
  263. Boomsma, K. ve Poulikakos, D., “On the
  264. effective thermal conductivity of a threedimensionally
  265. structured fluid-saturated metal
  266. foam”, International Journal of Heat and Mass
  267. Transfer, 44, 827-836, 2001.
  268. Sugawara, A. ve Yoshizawa, Y., “An
  269. Investigation on the Thermal Conductivity of
  270. Porous Materials and its Application to Porous
  271. Rock”, Australian J. Phys., 14, 468-469, 1961.
  272. Fan, L.-W., Hu, Y.-C., Tian, T. ve Yu, Z.-T.,
  273. “The prediction of effective thermal
  274. conductivities perpendicular to the fibres of wood
  275. using a fractal model and an improved transient
  276. measurement technique”, International Journal
  277. of Heat and Mass Transfer, 49, 4116–4123,
  278. Peitgen, H.O. ve Saupe, D., The Science of
  279. Fractal Images, Springer-Verlag Newyork Inc,
  280. New York, U.S.A., 1988.
  281. Hamilton, R.L. ve Crosser, O.K., “Thermal
  282. conductivity of heterogeneous two-component
  283. systems”, Industrial and Engineering
  284. Chemistry Fundamentals, 1(3), 187–191, 1962.
  285. Davis, R.H., “Thermal conductivity of mixture
  286. with spherical inclusions”, Int. J. Thermophys.,, 609-620, 1986.
  287. Lu, S.-Y. ve Lin, H.-C., “Effective conductivity of
  288. composites containing aligned spheroidal inclusions of
  289. finite conductivity”, Journal of Applied Physics, 79,, 1996.
  290. Bhattacharya, A., Calmidi, V.V. ve Mahajan,
  291. R.L., “Thermophysical properties of high
  292. porosity metal foams”, International Journal of
  293. Heat and Mass Transfer, 45, 1017-1031, 2002.
  294. Kalaprasad, G., Pradeep, P., Mathew, G.,
  295. Pavithran, C. ve Thomas, S., “Thermal
  296. conductivity and thermal diffusivity analyses of
  297. low-density polyethylene composites reinforced
  298. with sisal, glass and intimately mixed sisal/glass
  299. fibres”, Composites Science and Technology,, 2967-2977, 2000.
  300. Springer, G.S., Tsai, S.W., “Thermal
  301. conductivities of unidirectional materials”, J.
  302. Compos. Mater, 1, 166-173, 1967.
  303. Verma, L.S., Shrotriya, A.K., Singh, R. ve
  304. Chaudhary, D.R., “Thermal conduction in twophase
  305. materials with spherical and non-spherical
  306. inclusions”, J. Phys. D: Appl. Phys., 24, 1729–, 1991.
  307. Druma, A.M., Alam, M.K. ve Druma, C.,
  308. “Analysis of Thermal Conduction in Carbon
  309. Foams”, International Journal of Thermal
  310. Sciences, 43, 689-695, 2004.
  311. Gibson, P.W., “Multiphase heat and mass transfer
  312. through hygroscopic porous media with
  313. applications to clothing materials”, Technical
  314. Report Natick/TR-97/005, U.S. Army Natick
  315. Research, Development, and Engineering Center,
  316. MA, Natick, U.S.A., 1996.
  317. Patirop, C., Modeling of Thermal Performance of
  318. Firefighter Protective Clothing During The
  319. Intense Heat Exposure, Doktora Tezi, North
  320. Carolina State University, Mechanical Engineering
  321. Departmant, Raleigh, North Carolina, 2004.
  322. Rahman, M.S. ve Chen, X.D., “A general form of
  323. thermal conductivity equation as applied to an
  324. apple: effects of moisture, temperature and
  325. porosity”, Drying Technol., 13, 1-18, 1995.
  326. Rahman, M.S., Chen, X.D. ve Perera, C.O., “An
  327. improved thermal conductivity prediction model
  328. for fruits and vegetables as a function of
  329. temperature, water content and porosity”,
  330. Journal of Food Engineering, 31, 163–170,
  331. Rahman, M.S., “Thermal conductivity of four
  332. food materials as a single function of porosity
  333. and water content”, J. Food Eng., 15, 261-268,
  334. Gupta, M., Yang, J. ve Roy, C., “Modelling the
  335. Effective Thermal Conductivity in Polydispersed Bed
  336. Systems: A Unified Approach using the Linear
  337. Packing Theory and Unit Cell Model”, The Canadian
  338. Journal of Chemical Engineering, 80, 830-839,
  339. Gupta, M., Yang, J. ve Roy, C., “Predicting the Effective
  340. Thermal Conductivity of Polydispersed Beds of Softwood
  341. Bark and Softwood Char”, Fuel, 82, 395-404, 2003.
  342. Tsotsas, E. ve Martin, H., “Thermal Conductivity
  343. of Packed Beds: A Review”, Chem. Eng.
  344. Process, 22, 19–37, 1987.
  345. Zehner, P. ve Schlunder, E.U., “Thermal
  346. Conductivity of Granular Materials at Moderate
  347. Temperatures”, Chemie Ingr Tech., 42, 933-, 1970.
  348. Fu, X., Viskanta, R. ve Gore, J.P., “Prediction of
  349. Effective Thermal Conductivity of Cellular
  350. Ceramics”, Int. Comm. Heat Mass Transfer, 25
  351. , 151-160, 1998.
  352. Lee, S.L. ve Yang, J.H., “Modelling of Effective
  353. Thermal Conductivity for A Nonhomogeneous
  354. Anistropic Porous Medium”, Int. J. Heat Mass
  355. Transfer, 41 (6-7), 931-937, 1997.
  356. Park, J., Thermal/Fluid Characteristics of
  357. Isotropic Plain-Weave Screen Laminates as
  358. Heat Exchange Surfaces, Master Thesis,
  359. University of Nevada, Mechanical Engineering
  360. Departmant, Reno, Nevada, U.S.A., 2001.
  361. Xu, J. ve Wirtz, R.A., “In-Plane Effective
  362. Thermal Conductivity of Plain-Weave Screen
  363. Laminates”, IEEE Transactions on components
  364. and packaging Technologies, 25 (4), 615-620,
  365. Hu, X.-J., Du, J.-H., Lei, S.-Y. ve Wang, B.-X.,
  366. “Technical Note:A model for the thermal
  367. conductivity of unconsolidated porous media
  368. based on capillary pressure±saturation relation”,
  369. International Journal of Heat and Mass
  370. Transfer, 44, 247-251, 2001.
  371. Liang, X.-G.ve Qu, W. “Effective thermal
  372. conductivity of gas-solid composite materials and
  373. the temperature difference effect at high
  374. temperature”, International Journal of Heat
  375. and Mass Transfer, 42 (10), 1885-1893(9),
  376. Soma Shekar, S., Thermal performance of
  377. plain weave screen as a heater surface in
  378. paralel plate free convection, Master Tezi,
  379. University of Nevada, Mechanical Engineering,
  380. Reno, Nevada, 94, 2006.
  381. Seo, B.H., Cho, Y.J., Youn, J.R., Chung, K.,
  382. Kang, T.J. ve Park, J.K. “Model for Thermal
  383. Conductivities in Spun Yarn Carbon Fabric
  384. Composites”, Polymer Composites, 26, 791-
  385. Carson, J.K., Lovatt, S. J., Tanner, D.J. ve
  386. Cleland, A.C., “Experimental measurements of
  387. the effective thermal conductivity of a pseudoporous
  388. food analogue over a range of porosities
  389. and mean pore sizes”, Journal of Food
  390. Engineering, 63, 87–95, 2004.
  391. Jiang, P., Li, M., Lu, T., Yu, L. ve Ren, Z.,
  392. “Experimental Research on Convection Heat
  393. Transfer in Sintered Porous Plate Channels”,
  394. Transfer, 47, 2085-2096, 2004.
  395. Jang, B.K. ve Matsubara, H., “Influence of
  396. rotation speed on microstructure and thermal
  397. conductivity of nano-porous zirconia layers
  398. fabricated by EB-PVD”, Scripta Materialia,52,
  399. 558, 2005.
  400. Fu, X. ve Chung, D.D.L., “Effects silica fume
  401. latex methycellulose and carbon fibers on the
  402. thermal conductivity and specific heat of cement
  403. paste”, Cement and Concrete Research, 27
  404. , 1799-1804(6), 1997.
  405. Levine, I.N., Physical chemistry, McGraw-Hill
  406. Education, Maidenhead, England, 2001.
  407. Lide, D.R., CRC Handbook of chemistry and
  408. physics, CRC Press, Boca Raton (FL), U.S.A,