Dergiler / Politeknik Dergisi / 2023 / Cilt: 26 - Sayı: 1

Vişne Çekirdeği İçi ile Hazırlanmış Biyokompozit Filmler ve Bazı Özelliklerinin İncelenmesi

Biocomposite Films Prepared with Sour Cherry Kernel and Investigation of Some Properties

Sayfa
469–476
Yayın Tarihi
2023-03-27
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

AESO’nun suda çözünürlük oranı kütlece %0.1103 olarak tespit edilmiştir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Bu çalışmanın temel amacı, doğal bir atık olan vişne çekirdeği içi (VSK) ile yenilenebilir doğal bir biyokompozit film elde etmektir.
📊
Temel Bulgular & Veri:Elde edilen AESO/SCK kompozit filmlerin antibakteriyel aktivite testleri, şişme-çözünürlük-su içeriği ve pH özelliklerine katkı maddesi oranının etkisi incelenmiştir.
💡
Sonuç & Katkı:AESO’nun suda çözünürlük oranı kütlece %0.1103 olarak tespit edilmiştir.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Antibakteriyel aktivite · Biyokompozit film · Vişne çekirdeği içi.

Özet

Bu çalışmanın temel amacı, doğal bir atık olan vişne çekirdeği içi (VSK) ile yenilenebilir doğal bir biyokompozit film elde etmektir. Matris olarak akrilatlanmış epoksitlenmiş soya yağı(AESO) kullanılmıştır. Elde edilen AESO/SCK kompozit filmlerin antibakteriyel aktivite testleri, şişme-çözünürlük-su içeriği ve pH özelliklerine katkı maddesi oranının etkisi incelenmiştir. Ayrıca film numunelerinin SEM ile yüzey morfolojileri incelenmiştir. AESO/SCK filmlerinin antibakteriyel özelliğe sahip olduğu gözlenmiştir. Ayrıca, AESO/SCK kompozit filmlerin şişme oranı %0.2433 ile %4.6343 arasında bulunmuştur. AESO’nun suda çözünürlük oranı kütlece %0.1103 olarak tespit edilmiştir. Bu oran SCK oranı arttıkça artmış ve %50 SCK oranı ile %0.7380’e ulaşmıştır. AESO/SCK kompozit filmlerinin su içeriği %0.660-2.1203 aralığında değer almıştır. Hazırlanan tüm biyokompozit filmlerin, pH'ı 72 saat sonunda 7.18-7.33 aralığında olup bu değerlerin cilt pH'ı ile uyumlu olduğu görülmüştür. AESO’nun su buharı geçirgenliği ortalama 1.382x10-07 g.m/(m2*Pa*s) olarak ölçülmüştür. Kütlece %50 SCK oranı ile bu değer 5.025x10-10 g.m/(m2*Pa*s)’ne düşmüştür

Abstract

The main purpose of this study is to obtain a renewable natural biocomposite film with the sour cherry kernel (SCK), a natural waste. Biobased acrylated epoxidized soybean oil (AESO) resin was used as a composite matrix. The effect of additive ratio on antibacterial activity tests, swelling-solubility-water content, and pH properties of the obtained AESO/SCK composite films were investigated. In addition, the surface morphologies of the film samples were examined by SEM. It has been observed that AESO/SCK films have antibacterial properties. In addition, the swelling ratio of AESO/SCK composite films was found to be between 0.2433% and 4.6343%. The water solubility rate of AESO was determined as 0.1103% by weight. This ratio increased as the SCK ratio increased and reached 0.7380% with a 50% SCK ratio. The water content of AESO/SCK composite films was in the range of 0.660-2.1203%. The pH of all prepared biocomposite films was between 7.18-7.33 after 72 hours, and these values were found to be compatible with skin pH. The water vapor permeability of AESO was measured as 1.382x10-07 g.m/(m2*Pa*s) on average. With 50% SCK by weight, this value decreased to 5.025x10-10 g.m/(m2*Pa*s).

🔖

Bu Makaleye Atıf Yap

SOYDAL, Ü., BUL, M. M., YILDIRIM, M. (2023). Vişne Çekirdeği İçi ile Hazırlanmış Biyokompozit Filmler ve Bazı Özelliklerinin İncelenmesi. Politeknik Dergisi, Cilt: 26 - Sayı: 1, 469–476. https://ajindex.com/articles/888312

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (12)

  1. Salam, H., Dong, Y., “Theoretical modeling analysis on tensile properties of bioepoxy/clay nanocomposites using epoxidised soybean oils,” Journal of Nanomaterials, 2019, 1-20.(2019
  2. Işıtan, A., Gök, C., Sulak, M., Kırmızı, F., Onar, V., Kutlubay, R.Ç., “Bioplastics / biopolymers: How aware are we?, ”European Journal of Science and Technology, Özel Sayı, 37, 36, 41, (2022)
  3. Ammar, A., Iling, A.W.M., Ramesh, K., Ramesh, S., “Development of fully organic coating system modified with epoxidized soybean oil with superior corrosion protection performance,” Progress in Organic Coatings, 140, 105523, (2020)
  4. Park, S. J., Jin, F. L., Lee, J. R., “Synthesis and thermal properties of epoxidized vegetable oil,” Macromolecular Rapid Communications, 25(6), 724- 727, (2004)
  5. Uyama, H., Kuwabara, M., Tsujimoto, T., Nakano, M., Usuki A., Kobayashi, S., “Organic-inorganic hybrids from renewable plant oils and clay,” Macromolecular Bioscience, 4, 3, 354-360, (2004)
  6. Ge, X., Yu, L., Liu, Z., Liu, H., Chen, Y., Chen, L., “Developing acrylated epoxidized soybean oil coating for improving moisture sensitivity and permeability of starch-based film,” International Journal of Biological Macromolecules, 125, 370-375, (2019)
  7. Tanrattanakul, V., Saithai, P., “Mechanical properties of bioplastics and bioplastic-organoclay nanocomposites prepared from epoxidized soybean oil with different epoxide contents,” Journal of Applied Polymer Science,114(5), 3057-3067, (2009)
  8. Zhang, C., Yan, M., Cochran, E.W., Kessler, M.R., “Biorenewable polymers based on acrylated epoxidized soybean oil and methacrylated vanillin,” Materials Today Communications, 5, 18-22, (2015)
  9. Baştürk, E., Inan, T., Güngör, A., “Flame retardant uvcurable acrylated epoxidized soybean oil based organic– inorganic hybrid coating,” Progress in Organic Coatings, 76, 985-992, (2013)
  10. Carrillo, L.Q., Duart, S., Montanes, N., Giner, S. T., Balart, R., “Enhancement of the mechanical and thermal properties of injection-molded polylactide parts by the addition of acrylated epoxidized soybean oil,” Materials and Design, 140, 54-63, (2018)
  11. Hu, Y., Jla, P., Shanq, Q., Zhang, M., Feng, G., Lıu, C., Zhou, Y., “Synthesis and application of UV-curable phosphorous-containing acrylated epoxidized soybean oil-based resins,” Journal of Bioresources and Bioproducts,4(3), 183-191, (2019)
  12. Geethamma, V. G., Kalaprasad, G., Groeninckx, G., Thomas, S., “Dynamic mechanical behavior of short coir f