Dergiler / Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji / 2018 / Cilt: 6 - Sayı: 3

Metal-Gözenekli Silisyum Direkt Hidrojen Pili Üretim Parametrelerinin Geliştirilmesi

Development of Metal-Porous Silicon Direct Hydrogen Fuel-Cell Production Parameters

Sayfa
544–557
Yayın Tarihi
2022-11-04
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Deneysonuçlarından anlaşılacağı üzere Metal-GS-DHP elektriksel pil parametreleri anodizasyonkoşullarına direkt bağlıdır.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Gözenekli silisyum (GS) üretim yöntemi olan, elektrokimyasal aşındırma (anodizasyon)koşullarının, Metal-Gözenekli Silisyum Direkt Hidrojen Pili (Metal-GS-DHP) elektrikselparametrelerine etkisi oldukça yüksektir.
📊
Temel Bulgular & Veri:Bu çalışmada üretilen, n tipi, (111) yönelimli, tekkristal silisyumdan GS’nin 4 temel anodizasyon koşulu vardır (zaman, akım yoğunluğu, HForanı ve Işık aydınlatma).
💡
Sonuç & Katkı:Deneysonuçlarından anlaşılacağı üzere Metal-GS-DHP elektriksel pil parametreleri anodizasyonkoşullarına direkt bağlıdır.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Gözenekli silisyum (GS) üretim yöntemi olan, elektrokimyasal aşındırma (anodizasyon)koşullarının, Metal-Gözenekli Silisyum Direkt Hidrojen Pili (Metal-GS-DHP) elektrikselparametrelerine etkisi oldukça yüksektir. Bu çalışmada üretilen, n tipi, (111) yönelimli, tekkristal silisyumdan GS’nin 4 temel anodizasyon koşulu vardır (zaman, akım yoğunluğu, HForanı ve Işık aydınlatma). Anodizasyon zamanı 5-100 dakika, akım yoğunluğu 5-75 mA/cm2,HF:deiyonize H2O oranı 1:1- 1:11 ve ışık aydınlatma şiddeti 1000-7000 lüx aralıklarındauygulanmıştır .En iyi anodizasyon zamanı 40 dakika ve buna karşılık gelen Metal-GS-DHPelektriksel pil parametreleri, Voc= 590 mV Isc=30 µA’dir. En iyi akım yoğunluğu 20 mA/cm2ve buna karşılık gelen Metal-GS-DHP elektriksel pil parametreleri, Voc= 700 mV, Isc=15µA’dir. En iyi HF:H2O oranı 1:3 ve buna karşılık gelen Metal-GS-DHP elektriksel pilparametreleri, Voc= 420 mV, Isc=10 µA’dir. En iyi ışık aydınlatma şiddeti 4000 lüx ve bunakarşılık gelen Metal-GS-DHP elektriksel pil parametreleri, Voc= 540 mV Isc=18 µA’dir. Deneysonuçlarından anlaşılacağı üzere Metal-GS-DHP elektriksel pil parametreleri anodizasyonkoşullarına direkt bağlıdır.

Abstract

Effect of the electrochemical etching (anodization) that is one of the manufacturing process of porous silicon (PS) on the electrical parameters of metal-porous silicon direct hydrogen cell (Metal-PS-DHC) is considerably high. There is 4 basic anodization parameters of n-type, (111) oriented, single crystal PS fabricated in this study (time, current density, HF ratio and light). 5- 100 Min. of anodization time, 5-75 mA/cm2 of current density, 1:1- 1:11 of HF:deionized H2O ratio and 1000-7000 lux light intensity is applied. The best anodization time is 40 minutes and corresponding Metal-PS-DHC electrical cell parameters are Voc= 590 mV and Isc=30 µA. The best HF: H2O ratio is 1:3 and the corresponding Metal-GS-DHP electrical cell parameters are Voc= 540 mV and Isc=18 µA. The best light intensity is 4000 lux and the corresponding MetalGS-DHP electrical cell parameters are Voc= 540 mV and Isc=18 µA. As the experimental results show, Metal-GS-DHP electrical cell parameters are directly related to the anodization conditions.

🔖

Bu Makaleye Atıf Yap

ORUÇ, Ç., GÜLER, S., LUŞ, H. M. (2022). Metal-Gözenekli Silisyum Direkt Hidrojen Pili Üretim Parametrelerinin Geliştirilmesi. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, Cilt: 6 - Sayı: 3, 544–557. https://ajindex.com/articles/651005

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (14)

  1. A. Uhlir, Electrolytic Shaping of Germanium and Silicon. Bell System Tech. J. 35: (1956) 33-347.
  2. L.T. Canham, Quantum Wire Array Fabrication by Electrochemical and Chemical Dissolution of Wafers. Appl. Phys. Lett. 57:10 (1990) 1046-1048.
  3. R.L. Smith, S.D. Collins, Porous Silicon Formaton Mechanisms. Journal Appl. Phys. 71:R (1992) 1- 21. A. Faucaran, F. Paskal-Delnnoy, A. Giani, A. Sackda, P. Combette, A. Boyer, Porous Silicon Layers Used for Gas Sensor Applications. Thin Solid Films. 297: (1997) 317-320.
  4. L.A. Balagurov, S.C. Bayliss, A.F. Orlov, E.A. Petrova, B. Unal, D.G. Yarkin, Electrical Properties of Metal/Porous Silicon/p-Si Structures Whit Thin Porous Silicon Layer., Journal of Appl. Phys. 90:8 (2001) 4184-4190. D. G. Yarkin, (2003), Impedance of Humidity Sensitive Metal/Porous Silicon/n-Si Structures. Sensors and Actuators B. 107: (2003)1-6.
  5. T.D. Dzhafarov, C. Oruc, ve S. Aydin, Humidity-Voltaic Characteristics of Au Porous Silicon Interfaces. J. Phys. D: Appl. Phys. 37, 3: (2004) 404-408.
  6. D. B. Dimitrov, Current-Voltage Characteristics of Porous-Silicon Layers. Physical Review B. 51,3: (1995) 1562-1566.
  7. P.M.Z. Hasan, V.K. Sajith, M. Shahnawaze Ansari, J. Iqbal, A. Alshahrie, Influence of HF Concantration of Current Density of Characteristic Morphological Features of Mezoporous Silicon. Micropororus And Mezoporous Materials. 249: (2017) 176-190.
  8. M. Das, P. Nath, D. Sarkar, Influence of Etching Current Density on Microstructural Optical and Electrical Properties of Porous Silicon (PS):n-Si Heterostructure. Superlattices and Microstuctures. 90: (2016) 77-86.
  9. M. Ramesh, H.S. Nagaraja, Effect of Current Density on Morphological Structural and Optical Properties of Porous Silicon. Materials Today Chemistry. 3: (2017) 10-14.
  10. F. S. Gill, V. Panvar, H. Gupta, G. S. Kalra, S. Chawla, R. Kumar, R. M. Mehra, Study of Growth Dot and Column inPorous Silicon Samples of Various Thicnesses Prepared at a Costant Current Density. Physica E. 73: (2015) 110-115.
  11. M. Ramesh, H.S. Nagaraja, The Effect of Ethcing Time on Structural Properties of Porous Siliconat The Room Temperature. Material Today: Proseeding. 3: (2016) 2085-2090.
  12. A.S. Khaldun, O. Khalid, Z. Hassan, The Effect of Ethcing Time of Porous Silicon Solar Cell Performance. Superlattices and Microstuctures. 50: (2011) 647-658.
  13. T. D. Dzhafarov, B. Can Omur, C. Oruc. Z.A. Allahverdiev, Hydrojen Sensing Characteristics of CuPS-Si Structures. J. Phys. D: Appl. Phys. 35: (2002) 3122-3126.
  14. C. Oruc, S. Guler, Effect o