Journals / Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji / 2018 / Cilt: 6 - Sayı: 3

Development of Metal-Porous Silicon Direct Hydrogen Fuel-Cell Production Parameters

Metal-Gözenekli Silisyum Direkt Hidrojen Pili Üretim Parametrelerinin Geliştirilmesi

Pages
544–557
Publication Date
2022-11-04
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As the experimental results show, Metal-GS-DHP electrical cell parameters are directly related to the anodization conditions.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Effect of the electrochemical etching (anodization) that is one of the manufacturing process of porous silicon (PS) on the electrical parameters of metal-porous silicon direct hydrogen cell (Metal-PS-DHC) is considerably high.
📊
Key Findings & Data:There is 4 basic anodization parameters of n-type, (111) oriented, single crystal PS fabricated in this study (time, current density, HF ratio and light). 5- 100 Min. of anodization time, 5-75 mA/cm2 of current density, 1:1- 1:11 of HF:deionized H2O ratio and 1000-7000 lux light intensity is applied.
💡
Conclusion & Impact:As the experimental results show, Metal-GS-DHP electrical cell parameters are directly related to the anodization conditions.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Effect of the electrochemical etching (anodization) that is one of the manufacturing process of porous silicon (PS) on the electrical parameters of metal-porous silicon direct hydrogen cell (Metal-PS-DHC) is considerably high. There is 4 basic anodization parameters of n-type, (111) oriented, single crystal PS fabricated in this study (time, current density, HF ratio and light). 5- 100 Min. of anodization time, 5-75 mA/cm2 of current density, 1:1- 1:11 of HF:deionized H2O ratio and 1000-7000 lux light intensity is applied. The best anodization time is 40 minutes and corresponding Metal-PS-DHC electrical cell parameters are Voc= 590 mV and Isc=30 µA. The best HF: H2O ratio is 1:3 and the corresponding Metal-GS-DHP electrical cell parameters are Voc= 540 mV and Isc=18 µA. The best light intensity is 4000 lux and the corresponding MetalGS-DHP electrical cell parameters are Voc= 540 mV and Isc=18 µA. As the experimental results show, Metal-GS-DHP electrical cell parameters are directly related to the anodization conditions.

Özet

Gözenekli silisyum (GS) üretim yöntemi olan, elektrokimyasal aşındırma (anodizasyon)koşullarının, Metal-Gözenekli Silisyum Direkt Hidrojen Pili (Metal-GS-DHP) elektrikselparametrelerine etkisi oldukça yüksektir. Bu çalışmada üretilen, n tipi, (111) yönelimli, tekkristal silisyumdan GS’nin 4 temel anodizasyon koşulu vardır (zaman, akım yoğunluğu, HForanı ve Işık aydınlatma). Anodizasyon zamanı 5-100 dakika, akım yoğunluğu 5-75 mA/cm2,HF:deiyonize H2O oranı 1:1- 1:11 ve ışık aydınlatma şiddeti 1000-7000 lüx aralıklarındauygulanmıştır .En iyi anodizasyon zamanı 40 dakika ve buna karşılık gelen Metal-GS-DHPelektriksel pil parametreleri, Voc= 590 mV Isc=30 µA’dir. En iyi akım yoğunluğu 20 mA/cm2ve buna karşılık gelen Metal-GS-DHP elektriksel pil parametreleri, Voc= 700 mV, Isc=15µA’dir. En iyi HF:H2O oranı 1:3 ve buna karşılık gelen Metal-GS-DHP elektriksel pilparametreleri, Voc= 420 mV, Isc=10 µA’dir. En iyi ışık aydınlatma şiddeti 4000 lüx ve bunakarşılık gelen Metal-GS-DHP elektriksel pil parametreleri, Voc= 540 mV Isc=18 µA’dir. Deneysonuçlarından anlaşılacağı üzere Metal-GS-DHP elektriksel pil parametreleri anodizasyonkoşullarına direkt bağlıdır.

🔖

Cite This Article

ORUÇ, Ç., GÜLER, S., LUŞ, H. M. (2022). Development of Metal-Porous Silicon Direct Hydrogen Fuel-Cell Production Parameters. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, Cilt: 6 - Sayı: 3, 544–557. https://ajindex.com/articles/651005

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. A. Uhlir, Electrolytic Shaping of Germanium and Silicon. Bell System Tech. J. 35: (1956) 33-347.
  2. L.T. Canham, Quantum Wire Array Fabrication by Electrochemical and Chemical Dissolution of Wafers. Appl. Phys. Lett. 57:10 (1990) 1046-1048.
  3. R.L. Smith, S.D. Collins, Porous Silicon Formaton Mechanisms. Journal Appl. Phys. 71:R (1992) 1- 21. A. Faucaran, F. Paskal-Delnnoy, A. Giani, A. Sackda, P. Combette, A. Boyer, Porous Silicon Layers Used for Gas Sensor Applications. Thin Solid Films. 297: (1997) 317-320.
  4. L.A. Balagurov, S.C. Bayliss, A.F. Orlov, E.A. Petrova, B. Unal, D.G. Yarkin, Electrical Properties of Metal/Porous Silicon/p-Si Structures Whit Thin Porous Silicon Layer., Journal of Appl. Phys. 90:8 (2001) 4184-4190. D. G. Yarkin, (2003), Impedance of Humidity Sensitive Metal/Porous Silicon/n-Si Structures. Sensors and Actuators B. 107: (2003)1-6.
  5. T.D. Dzhafarov, C. Oruc, ve S. Aydin, Humidity-Voltaic Characteristics of Au Porous Silicon Interfaces. J. Phys. D: Appl. Phys. 37, 3: (2004) 404-408.
  6. D. B. Dimitrov, Current-Voltage Characteristics of Porous-Silicon Layers. Physical Review B. 51,3: (1995) 1562-1566.
  7. P.M.Z. Hasan, V.K. Sajith, M. Shahnawaze Ansari, J. Iqbal, A. Alshahrie, Influence of HF Concantration of Current Density of Characteristic Morphological Features of Mezoporous Silicon. Micropororus And Mezoporous Materials. 249: (2017) 176-190.
  8. M. Das, P. Nath, D. Sarkar, Influence of Etching Current Density on Microstructural Optical and Electrical Properties of Porous Silicon (PS):n-Si Heterostructure. Superlattices and Microstuctures. 90: (2016) 77-86.
  9. M. Ramesh, H.S. Nagaraja, Effect of Current Density on Morphological Structural and Optical Properties of Porous Silicon. Materials Today Chemistry. 3: (2017) 10-14.
  10. F. S. Gill, V. Panvar, H. Gupta, G. S. Kalra, S. Chawla, R. Kumar, R. M. Mehra, Study of Growth Dot and Column inPorous Silicon Samples of Various Thicnesses Prepared at a Costant Current Density. Physica E. 73: (2015) 110-115.
  11. M. Ramesh, H.S. Nagaraja, The Effect of Ethcing Time on Structural Properties of Porous Siliconat The Room Temperature. Material Today: Proseeding. 3: (2016) 2085-2090.
  12. A.S. Khaldun, O. Khalid, Z. Hassan, The Effect of Ethcing Time of Porous Silicon Solar Cell Performance. Superlattices and Microstuctures. 50: (2011) 647-658.
  13. T. D. Dzhafarov, B. Can Omur, C. Oruc. Z.A. Allahverdiev, Hydrojen Sensing Characteristics of CuPS-Si Structures. J. Phys. D: Appl. Phys. 35: (2002) 3122-3126.
  14. C. Oruc, S. Guler, Effect o