Dergiler / Yerbilimleri / 2021 / Cilt: 42 - Sayı: 1

Silt türü bir Zeminin Gerilme Rahatlaması üzerine Deneysel bir Çalışma

An Experimental Study on Stress Relaxation of a Silt-type Soil

Sayfa
70–84
Yayın Tarihi
2022-11-06
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Elde edilen bulgular, gerilme rahatlamasının tek eksenli sıkışma dayanımı (TESD) değerleri üzerinde önemli etkisi olduğunu göstermektedir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Bu çalışmada, farklı birim deformasyon seviyelerine tabi tutulan silt türü zemin numuneleri üzerine gerilme rahatlaması testleri gerçekleştirilmiştir.
📊
Temel Bulgular & Veri:Gerilme değerlerinin zamana bağlı değişimleri ile farklı birim deformasyon değerlerinin gerilme rahatlaması üzerine etkileri incelenmiştir.
💡
Sonuç & Katkı:Elde edilen bulgular, gerilme rahatlamasının tek eksenli sıkışma dayanımı (TESD) değerleri üzerinde önemli etkisi olduğunu göstermektedir.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Gerilme rahatlaması · Zamana bağlı davranış · Siltlerin sıkışma dayanımı

Özet

Bu çalışmada, farklı birim deformasyon seviyelerine tabi tutulan silt türü zemin numuneleri üzerine gerilme rahatlaması testleri gerçekleştirilmiştir. Gerilme değerlerinin zamana bağlı değişimleri ile farklı birim deformasyon değerlerinin gerilme rahatlaması üzerine etkileri incelenmiştir. Ayrıca, gerilme rahatlamasının tek eksenli sıkışma dayanımı (serbest basınç mukavemeti) değerleri üzerindeki etkileri bir dizi deneysel çalışma ile belirlenmiştir. Elde edilen bulgular, gerilme rahatlamasının tek eksenli sıkışma dayanımı (TESD) değerleri üzerinde önemli etkisi olduğunu göstermektedir. TESD değerleri belirli bir seviyeye kadar gerilme rahatlaması yaşanan birim deformasyon miktarı arttıkça yükselmiştir. Ancak, dayanım değerlerine yakın yüksek gerilme seviyelerinde başlayan rahatlamaların TESD değerlerini olumsuz etkilediği görülmüştür.

Abstract

In this study, stress relaxation tests were carried out by keeping specimens of a silt type soil under different strain levels. Decreases in the stress values with time data was collected to better understand the effect of the strain level on the relaxation properties of soil specimens. In addition, the stress relaxation effect on the uniaxial compressive strength (UCS) values of the specimens was investigated with a series of tests. According to the results obtained from this study, the UCS values of the silt specimens significantly vary as a result of the stress relaxation effect. The UCS values were determined to increase with an increase of relaxation strain level to a threshold value. On the other hand, the UCS values were found to be affected adversely in case of high stress levels at the initiation of the relaxation, which are close to the peak level.

🔖

Bu Makaleye Atıf Yap

KÖMÜRLÜ, E. (2022). Silt türü bir Zeminin Gerilme Rahatlaması üzerine Deneysel bir Çalışma. Yerbilimleri, Cilt: 42 - Sayı: 1, 70–84. https://ajindex.com/articles/647076

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (11)

  1. ASTM International, 2010. ASTM D4318-10: Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. 2010
  2. Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA Augustesen, A., Liingaard, M. and Lade P.V., 2004. Evaluation of Time-Dependent Behavior of Soils. International Journal of Geomechanics, 4(3), 137-156.
  3. Bagheri, M., Rezania, M. and Nezhad, M.M., 2019. Rate Dependency and Stress Relaxation of Unsaturated Clays. International Journal of Geomechanics, 19(12), 04019128. Bock, R.G., Puri, V.M. and Manbeck, H.B., 1991. Triaxial test sample size effect on stress relaxation of wheat en masse. Transactions of the ASAE, 34(3), 966-971.
  4. Chegenizadeh, A., Keramatikerman, M., Nikraz, H., 2020. Effect of loading strain rate on creep and stress-relaxation characteristics of sandy silt. Results in Engineering, 7, 100143. Dijkstra, J., Andò, E. and Dano, C., 2019. Grain kinematics during stress relaxation in sand: not a problem for X-ray imaging. E3S Web of Conferences, 92, 01001. Dob, H., Messast, S., Boulon, M. and Flavigny, E., 2016. Treatment of the High Number of Cycles as a Pseudo-Cyclic Creep by Analogy with the Soft Soil Creep Model. Geotechnical and Geological Engineering, 34, 1985–1993.
  5. Hanley, K.J., O'Sullivan, C., Wadee, M.A. and Huang, X., 2015. Use of elastic stability analysis to explain the stress-dependent nature of soil strength. Royal Society Open Science, 2(4), 150038. Kamao, S., 2016. Creep And Relaxation Behavior of Highly Organic Soil. International Journal of Geomate, 11(25), 2506-2511
  6. Komurlu, E. and Kesimal, A., 2015. Experimental study of polyurethane foam reinforced soil used as a rock-like material. Journal of Rock Mechanics and Geotechnical Engineering, 7(5), 566-572.
  7. Kutergin, V.N., Kalbergenov, R.G., Karpenko, F.S., Leonov, A.R. and Merzlyakov, V.P., 2013. Determination of Rheological Properties of Clayey Soils by the Relaxation Method. Soil Mechanics and Foundation Engineering, 50, 1–6.
  8. Kwok, C.Y. and Bolton, M.D., 2013. DEM simulations of soil creep due to particle crushing. Géotechnique, 63(16), 1365-1376.
  9. Lade, P.V., Nam, J. and Liggio, C.D.J., 2010. Effects of Particle Crushing in Stress Drop-Relaxation Experiments on Crushed Coral Sand. Journal of Geotechnical and Geoenvironmental Engineering, 136(3), 500-509.
  10. Lade, P.V. and Karimpour, H., 2015. Stress relaxation behavior in Virginia Beach sand. Canadian Geotechnical Journal, 52(7), 813-835.
  11. Lade, P.V. and Karimpour, H., 2016. Stress