Dergiler / Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2020 / Cilt: 10 - Sayı: 4

The effects of annealing temperature on optical properties of 2, 6-bis (3- (carbazol-9-yl) phenyl) pyridine films

Sayfa
2532–2540
Yayın Tarihi
2022-10-18
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Asa result, the optical properties of films (bandgap energy, absorption band edge energy, refractive index,refractive (%), and transmission (%), etc.) were measured and evaluated according to the annealingtemperature.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:: In this research, 2, 6-bis (3- (carbazol-9-yl) phenyl) pyridine films were synthesized usingspin coating to study changes in its optical properties for different annealing temperatures.
📊
Temel Bulgular & Veri:The filmswere annealed at 30, 50, 70, 90, 110, 120, 140 and 160 ℃ degrees in the presence of nitrogen.
💡
Sonuç & Katkı:Asa result, the optical properties of films (bandgap energy, absorption band edge energy, refractive index,refractive (%), and transmission (%), etc.) were measured and evaluated according to the annealingtemperature.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Abstract

: In this research, 2, 6-bis (3- (carbazol-9-yl) phenyl) pyridine films were synthesized usingspin coating to study changes in its optical properties for different annealing temperatures. The filmswere annealed at 30, 50, 70, 90, 110, 120, 140 and 160 ℃ degrees in the presence of nitrogen. Thematerial studied is one of the basic materials of the organic light emitting diode and forms the lightemitting layer. In the results obtained from the films, for UV ultraviolet region, the highest absorptionwas obtained at 50 ℃ annealing, while the lowest absorption was 160 ℃. Optical band gap energies offilms range from 3.35 to 3.43 eV. Refractive index distributions depending on the annealing temperatureof the films were studied in detail. The refractive indices of the films at 440 nm wavelength variedbetween 2.71 and 3.39 according to different annealing temperatures. It is observed that it varied between3.06 eV and 3.19 eV. It was observed that in the visible region of the spectrum, refractive index of thefilms increased in a sharp linear behavior at a wavelength of 350 nm. Annealing took place in tworegimes that increase and decrease the effect of the optical band gap energy of the film. It can be seenthat the percentage of reflection of all films at the wavelengths after 500 nm was almost constant. It hasbeen evaluated that the films had 70 % transmittance at 70 ℃ (up to 160 ℃) and after this point, theirtransmission (%) was above 70 % and films can be used in the permeability devices of this feature. Asa result, the optical properties of films (bandgap energy, absorption band edge energy, refractive index,refractive (%), and transmission (%), etc.) were measured and evaluated according to the annealingtemperature.

🔖

Bu Makaleye Atıf Yap

MANTARCI, A. (2022). The effects of annealing temperature on optical properties of 2, 6-bis (3- (carbazol-9-yl) phenyl) pyridine films. Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 10 - Sayı: 4, 2532–2540. https://ajindex.com/articles/538527

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (9)

  1. Cheah LB, Rozana AMO, Poopalan P, 2020. Ga2O3 thin films by sol-gel method its optical properties. AIP Conference Proceedings, 2203: 020028. Chen D, Wang Z, Wang D, Wu YC, Lo CC, Lien A, Cao Y, Su SJ, 2015. Efficient exciplex organic light-emitting diodes with a bipolar acceptor. Organic Electronics, 25: 79-84.
  2. Guo R, Zhang S, Yue S, Yan P, Wu Y, Qu D, Zhao Y, 2016. High efficiency and simplified white organic lightemitting diode based on a single-host emission layer. Synthetic Metals, 220: 329-333
  3. Guo X, Yuan P, Qiao X, Yang D, Dai Y, Sun O, Qin A, Tang B, Ma D 2020. Mechanistic Study on High Efficiency Deep Blue AIE-Based Organic Light-Emitting Diodes by Magneto-Electroluminescence. Advanced Functional Materials, 30: 1908704. Keshav B, Amit J, 2020. Fabricating gold nanorattles impregnated chitosan film for catalytic application. Materials Science for Energy Technologies, 3: 167-173.
  4. Kim M, Lim C, Jeong D, Nam HS, Kim J, Lee J, 2016. Design of a MoOx/Au/MoOx transparent electrode for high-performance OLEDs. Organic Electronics, 36: 61-67.
  5. Koh T, Cho W, Yun HC, Yoo S, 2012. ITO-free down-conversion white organic light-emitting diodes with structured color conversion layers for enhanced optical efficiency and color rendering. Organic Electronics, 13: 3145-3153.
  6. Liang X, Wang K, Zhang LR, Guo K, Lu X, Wang K, Miao H, Xu H, Wang Z, 2017. Tetra-carbazole substituted spiro[fluorene-9,9′-xanthene]-based hole-transporting materials with high thermal stability and mobility for efficient OLEDs. Dyes and Pigments, 139: 764-771. Lee Y, 1996. A Compact and Transmissive Device for Dispersion-Compensation of Ultra-short Optical Pulses. OPT REV, 3: 303–305.
  7. Liu J, Li M, Lu Z, Huang Y, Pu X, Zhou L, 2020. Color tuning of iridium(III) complexes containing 2- phenylbenzothiazole-based cyclometalated ligands for application in highly efficient organic light-emitting diodes. Dyes and Pigments, 175: 108145.Mullemwar S.Y, Zade GD, Kalyani NT, Dhoble SJ, 2016. Blue light emitting P-Hydroxy DPQ phosphor for OLEDs. Optik - International Journal for Light and Electron Optics, 127: 10546-10553.
  8. Skuodis E, Tomkeviciene A, Reghu R, Peciulyte L, Ivaniuk K, Volyniuk D, Bezvikonnyi O, Bagdziunas G, Gudeika D, Grazulevicius JV, 2017. OLEDs based on the emission of interface and bulk exciplexes formed by cyano-substituted carbazole derivative. Dyes and Pigments, 139: 795-807.
  9. Tsai YS, Hong LA, Juang FS, Chen CY, 2014. Blue and white phosphorescent organic light emitting diode performance