Dergiler / Turkish Neurosurgery / 2019 / Cilt: 29 - Sayı: 1

Customised Cranioplasty Implant for Decompressive Craniectomy Patients – A Technical Note

Sayfa
148–150
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The authors present an easy and low costtechnique for making a customised cranioplasty implant by polymethylmethacrylate using the craniotomy bone flap of the patientas a template.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Cranioplasty is a commonly performed procedure following decompressive craniectomy.
📊
Temel Bulgular & Veri:Custom made titanium implants and polyetheretherketone implants, which are manufactured using 3Dprinting technologies, are also being used.
💡
Sonuç & Katkı:The authors present an easy and low costtechnique for making a customised cranioplasty implant by polymethylmethacrylate using the craniotomy bone flap of the patientas a template.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Cranioplasty is a commonly performed procedure following decompressive craniectomy. The patients are usually young earningpersons and increasing cost of treatment is difficult to bear especially in low and middle income countries. A variety of optionsare available for cranioplasty ranging from autologus bone graft to xenograft and synthetic materials. Presently the autologouscryopreserved or subcutaneously preserved bone graft is considered as the preferred choice, but it has the drawbacks of boneresorption and infection. Custom made titanium implants and polyetheretherketone implants, which are manufactured using 3Dprinting technologies, are also being used. However, their use is limited because of high cost and lack of availability of thesetechnologies in the developing world, which have the maximum number of such cases. The authors present an easy and low costtechnique for making a customised cranioplasty implant by polymethylmethacrylate using the craniotomy bone flap of the patientas a template.

🔖

Bu Makaleye Atıf Yap

MOHAMMAD, K. (2019). Customised Cranioplasty Implant for Decompressive Craniectomy Patients – A Technical Note. Turkish Neurosurgery, Cilt: 29 - Sayı: 1, 148–150. https://ajindex.com/articles/404430

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (1)

  1. Höhne J, Brawanski A, Gassner HG, Schebesch KM: Feasibility of the custom-made titanium cranioplasty CRANIOTOP®. Surg Neurol Int 4: 88, 2013 2. Kim BJ, Hong KS, Park KJ, Park DH, Chung YG, Kang SH: Customized cranioplasty implants using three-dimensional printers and polymethyl-methacrylate casting. J Korean Neurosurg Soc 52: 541-546, 2012 3. Ng ZY, Nawaz I: Computer-designed PEEK implants: A peek into the future of cranioplasty. J Craniofac Surg 25(1): e55-e58, 2014 4. Shah AM, Jung H, Skirboll S: Materials used in cranioplasty: A history and analysis Neurosurg Focus 36 (4): E19, 2014 5. Sinha S, Raheja A, Garg M, Moorthy S, Agrawal D, Gupta DK, Satyarthee GD, Singh PK, Borkar SA, Gurjar H, Tandon V, Pandey RM, Sharma BS: Decompressive craniectomy in traumatic brain injury: A single center, multivariate analysis of 1,236 patients at a tertiary care hospital in India. Neurol India 63(2): 175-182, 2015