Journals / Turkish Neurosurgery / 2019 / Cilt: 29 - Sayı: 1

Customised Cranioplasty Implant for Decompressive Craniectomy Patients – A Technical Note

Pages
148–150
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The authors present an easy and low costtechnique for making a customised cranioplasty implant by polymethylmethacrylate using the craniotomy bone flap of the patientas a template.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Cranioplasty is a commonly performed procedure following decompressive craniectomy.
📊
Key Findings & Data:Custom made titanium implants and polyetheretherketone implants, which are manufactured using 3Dprinting technologies, are also being used.
💡
Conclusion & Impact:The authors present an easy and low costtechnique for making a customised cranioplasty implant by polymethylmethacrylate using the craniotomy bone flap of the patientas a template.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Cranioplasty is a commonly performed procedure following decompressive craniectomy. The patients are usually young earningpersons and increasing cost of treatment is difficult to bear especially in low and middle income countries. A variety of optionsare available for cranioplasty ranging from autologus bone graft to xenograft and synthetic materials. Presently the autologouscryopreserved or subcutaneously preserved bone graft is considered as the preferred choice, but it has the drawbacks of boneresorption and infection. Custom made titanium implants and polyetheretherketone implants, which are manufactured using 3Dprinting technologies, are also being used. However, their use is limited because of high cost and lack of availability of thesetechnologies in the developing world, which have the maximum number of such cases. The authors present an easy and low costtechnique for making a customised cranioplasty implant by polymethylmethacrylate using the craniotomy bone flap of the patientas a template.

🔖

Cite This Article

MOHAMMAD, K. (2019). Customised Cranioplasty Implant for Decompressive Craniectomy Patients – A Technical Note. Turkish Neurosurgery, Cilt: 29 - Sayı: 1, 148–150. https://ajindex.com/articles/404430

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Höhne J, Brawanski A, Gassner HG, Schebesch KM: Feasibility of the custom-made titanium cranioplasty CRANIOTOP®. Surg Neurol Int 4: 88, 2013 2. Kim BJ, Hong KS, Park KJ, Park DH, Chung YG, Kang SH: Customized cranioplasty implants using three-dimensional printers and polymethyl-methacrylate casting. J Korean Neurosurg Soc 52: 541-546, 2012 3. Ng ZY, Nawaz I: Computer-designed PEEK implants: A peek into the future of cranioplasty. J Craniofac Surg 25(1): e55-e58, 2014 4. Shah AM, Jung H, Skirboll S: Materials used in cranioplasty: A history and analysis Neurosurg Focus 36 (4): E19, 2014 5. Sinha S, Raheja A, Garg M, Moorthy S, Agrawal D, Gupta DK, Satyarthee GD, Singh PK, Borkar SA, Gurjar H, Tandon V, Pandey RM, Sharma BS: Decompressive craniectomy in traumatic brain injury: A single center, multivariate analysis of 1,236 patients at a tertiary care hospital in India. Neurol India 63(2): 175-182, 2015