Frequency-Domain Ship Motion Code with Python Programming Language

Temel Bulgular & Veri:A container ship was selected as an example to demonstrate the outputs of the code in different headings, ranging from the beam to head waves.

💡

Sonuç & Katkı:The entire procedure is implemented using Python code.

🔬Tür:Araştırma Makalesi

📍Kapsam:Genişletilmiş Akademik Örneklem

⚙️Değişkenler:Alan Parametreleri

Özet

In this study, a frequency-domain seakeeping code is established. A container ship was selected as an example to demonstrate the outputs of the code in different headings, ranging from the beam to head waves. Tasai’s method is used to obtain two-dimensional hydrodynamic added mass and damping coefficients. For different loading conditions, the damping values for the roll motion can be obtained using Ikeda’s method. Froude Krylov and Diffraction terms for pitch and heave motions are computed using the head seas approximation. A user-friendly interface is designed for presenting frequency-domain analyses. Vertical motions, vertical accelerations, and some derived motion characteristics, such as deck wetness, slamming, and absolute vertical accelerations are plotted as transfer functions. The entire procedure is implemented using Python code.

🔖

Bu Makaleye Atıf Yap

ARSLAN, S. N., YAVUZ, A., ÇAKICI, F. (2021). Frequency-Domain Ship Motion Code with Python Programming Language. Journal of Eta Maritime Science, Cilt: 9 - Sayı: 4, 283–291. https://ajindex.com/articles/401499

📄 Tam Metin PDF Okuyucu

Yeni Sekmede Aç ↗

↗Yeni Sekme

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (11)

F. Ursell, “On the heaving motion of a circular cylinder on the surface of a fluid,” The Quarterly Journal of Mechanics and Applied Mathematics, vol. 2, pp. 218-231, Jan 1949
F. M. Lewis, “The inertia of the water surrounding a vibrating ship,” The Society of Naval Architects and Marine Engineers, vol. 27, pp. 1-20, Jun 1929
F. Tasai, “On the damping force and added mass of ships heaving and pitching,” Tech. Rep. Research Institute for Applied Mechanics, Kyushu University, Japan, vol. 7, pp. 131- 152, 1969
W. Frank, “Oscillation of cylinders in or below the free surface of deep fluids,” Tech. Rep. 2375, Naval Ship Research and Development Centre, Washington DC, USA, 1967. 5] B. V. Korvin-Kroukovsky, and W. R. Jacobs, “Pitching and heaving motions of a ship in regular waves,” Transactions SNAME, vol. 65, pp. 590-632, Nov 1957
N. Salvesen, E. O. Tuck, and O. Faltinsen, “Ship motions and sea loads.” The Society of Naval Architects and Marine Engineers, vol. 78, pp. 250-287, Dec 1970
M. St Denis, and W. Pierson, “On the motions of ships in confused seas,” The Society of Naval Architects and Marine Engineers, vol. 61, pp. 280-354, 1953
Y. Ikeda, “A study on roll damping of ships,” Ph. D. dissertation, Osaka Prefecture University, Japan, 1979
MAXSURF Connect Edition V21 Maxsurf User Manuel, Maxsurf Modeler, Maxsurf Motions, 2017
North Atlantic Treaty Organization (2000). Standardization Agreement (STANAG): Common Procedures for Seakeeping in the Ship Design Process. Brussels: North Atlantic Treaty Organization, Military Agency for Standardization
J. M. J. Journée, Theoretical manuel of seaway. Delft University of Technology Ship hydromechanics Laboratory, Netherlands, 2001
W. R. Porter, “Pressure distribution, added-mass and damping coefficients for cylinders oscillating in a free surface,” Tech. Rep. 82, University of California, Institute of Engineering Research, Berkeley, California, USA, 1960.