Dergiler / Yerbilimleri / 2017 / Cilt: 38 - Sayı: 2

Assessment of Rockfall Hazard on Steep Slopes: Ermenek (Karaman, Turkey)

Sayfa
161–178
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

For these reasons, hanging blocks in the reachable locations can be removed, the total evacuation of the danger zone may applied, and then taking safety measures in this area to make it safer for the residents.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Ermenek is a extraordinary settlement area due to its topographical features in Karaman (Turkey).
📊
Temel Bulgular & Veri:The city is located in the northern side of the steep cliffs, which are formed of jointed limestone that abruptly increases from 1250 m to 1850 m.
💡
Sonuç & Katkı:For these reasons, hanging blocks in the reachable locations can be removed, the total evacuation of the danger zone may applied, and then taking safety measures in this area to make it safer for the residents.
🔬Tür:Uygulamalı Anket & Alan Araştırması
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Ermenek · hazard · limestone

Özet

Ermenek is a extraordinary settlement area due to its topographical features in Karaman (Turkey). The city is located in the northern side of the steep cliffs, which are formed of jointed limestone that abruptly increases from 1250 m to 1850 m. Moreover, these cliffs, having a slope dip of nearly 90°, are the main rockfall source areas due to their lithological characteristics, climatic effects and the engineering properties of rock units. Up to now, depending on the rockfall event, nearly 500 residences have been severely damaged, and the loss of life has occurred in Ermenek. The rockfall phenomenon is initiated by discontinuities, lithological changes, weathering and the freeze-thaw process in the study area. In this study, extensive fieldwork including the determination of locations and dimensions of hanging, detached and fallen blocks; a detailed discontinuity survey; and the description of geological, morphological and topographical characteristics was performed. Additionally, rockfall hazard has been evaluated by two-dimensional rockfall analysis involving 10 profiles. While these profiles were determined, the locations where the most of the fallen blocks are observed are selected in the field study. During the rockfall analysis, run-out distance, bounce height, kinetic energy and the velocities of various sizes of blocks for each profile were determined through the use of RocFall v4.0 software. The results obtained from the rockfall analysis were used to map the areas of possible rockfall hazard zones, and rockfall source areas were interpreted. According to the rockfall analysis, field study and laboratory testing, protective and preventive recommendations can be suggested for the areas threatened by rockfall. However, the most widely known remedial measures in literature, such as trenches, retaining walls (barriers), wire mesh, cable/stretching nets and rock bolting, etc., are not sufficient in the study area due to its topographical, atmospheric and lithological features. For these reasons, hanging blocks in the reachable locations can be removed, the total evacuation of the danger zone may applied, and then taking safety measures in this area to make it safer for the residents.

🔖

Bu Makaleye Atıf Yap

TAĞA, H., ARAS, K. Z. (2017). Assessment of Rockfall Hazard on Steep Slopes: Ermenek (Karaman, Turkey). Yerbilimleri, Cilt: 38 - Sayı: 2, 161–178. https://ajindex.com/articles/336571

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (10)

  1. Agliardi F, Crosta GB., 2003. High resolution three-dimensional numerical modelling of rockfalls. International Journal of Rock Mechanics and Mining Science, 40, 455–471. Azzoni A, de Freitas MH.,1995. Experimentally gained parameters, decisive for rockfall analysis. Rock Mechanics and Rock Engineering 28(2), 111–124.
  2. Bassant, P., van Buchem, F.S.P., Strasser, A. and Görür N., 2005. The stratigraphic architecture and evolution of the Burdigalian carbonate–siliciclastic sedimentary systems of the Mut basin, Turkey. Sedimentary Geology, 173, 187-232.
  3. Bassato G, Cocco S, Silvano S., 1985. Programma di simulazione per lo scoscendimento di blocchi rocciosi. Dendronatura, 6(2), 34–36.
  4. Binal A, Ercanoğlu M., 2010. Assessment of rockfall potential in the Kula (Manisa, Turkey) Geopark Region. Environmental Earth Science, 61, 1361–1373.
  5. Bozzolo D, Pamini R., 1986. Modello matematico per lostudio della caduta dei massi. Laboratorio di FisicaTerrestre ICTS. Dipartimento Pubblica Educazione, Lugano-Trevano. Bourrier, F., Berger, F., Tardif, P., Dorren, L. and Hungr, O., 2012. Rockfall rebound: comparison of detailed field experiments and alternative modelling approaches. Earth Surface Process. Landforms. Buzzi O, Giacomini A, Spadari M., 2012. Laboratory investigation on high values of restitution coefficient Rock Mechanics and Rock Engineering 45, 35-43.
  6. Chau KT, Wond RHC, Lee CF.,1996. Rockfall problems in Hong Kong and some new experimental results for coefficient of restitution. International Journal of Rock Mechanics and Mining Science, 35, 662–663.
  7. Chen H, Chen RH, Huang T.,1994. An application of an analytical model to a slope subject to rockfalls Bulletin of Engineering Geology and Environment, 31, 447–458. Dorren LKA., 2003. A review of rockfall mechanics and modeling approaches. Progress in Physical Geography, 27(1), 69–87.
  8. Dorren LKA, Maier B, Putters US, Seijmonsbergen AC., 2004. Combining field and modelling techniques to assess rockfall dynamics on a protection forest hillslope in the European Alps Geomorphology, 57, 151–167. Duncan C. Wyllie, 2014. Calibration of rock fall modeling parameters, International Journal of Rock Mechanics and Mining Sciences, 67, 170-180.
  9. Evans SG, Hungr O.,1993. The assessment of rockfall hazard at the base of talus slopes. Canadian Geotechnical Journal, 30, 620–636. Falcetta JL.,1985. Un nouveau mod’’ele de calcul de trajectoires de blocs rocheux. Revue Francaise de Geotechnique, 30, 1–17.
  10. Guzzetti F, Crosta G, Detti R, Agli