Dergiler / Yerbilimleri / 2012 / Cilt: 33 - Sayı: 2

A Model for Determining the Breaking Characteristics of Immediate Roof in Longwall Mines

Sayfa
193–203
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗

Özet

-

Abstract

Nowadays, the longwall mining is one of the most prevalent methods being used in coal mines. For the safety and success of such mines, one of the most important parameters is determination of the periodic roof weighting interval. As a matter of fact periodic roof weighting interval (PRWI) is not selected. Design and selection of support in this mining method should be correctly selected considering PRWI. Consequently, the current paper tries to develop a new model for determining the periodic roof weighting interval of coal mines. For this, the roof weighting interval is modeled by applying an analytical method and presented a model for determining the roof weighting interval. The results are compared with some case studies at coal mines. It is found that that the proposed model can confidently be used for determining the roof weighting interval in coal mines.

🔖

Bu Makaleye Atıf Yap

NOROOZI, A., ORAEE, K., JAVADI, M., GOSHTASBI, K., KHODADAY, H. (2012). A Model for Determining the Breaking Characteristics of Immediate Roof in Longwall Mines. Yerbilimleri, Cilt: 33 - Sayı: 2, 193–203. https://ajindex.com/articles/332493

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (7)

  1. Afsarinejad, M., 1999. Numerical Modeling of Inclined Seams. PhD Thesis, University of Nottingham, UK, (in Persian) Ajalloeian, R., 2000. Empirical Rock Failure Cri- teria. Daneshjoo Press,
  2. Hamedan, Iran, (in Persian) Ataee, M., 2005. Underground Mining (Special subjects). Vol.Three, Shahrood Univer- sity Press,
  3. Shahrood, Iran, (in Persian) Bieniawski, Z. T., 1979. The Geomechanics Classification in Rock Engineering App- lications. Proceedings of the 4th Inter- national Congress on Rock Mechanic, ISRM, Montreux Bieniawski, Z.T., 1984. Rock Mechanics Design in Mining and Tunneling. Balkema, Net- herlands Butcher, R.J., 2001. Application of The Coal Mine Roof Rating System in South Af- rican collieries. Proceedings of the 20th International Conference on Ground Control in Mining, S.S. Peng et al., West Virginia University. Morgantown Das, S.K., 2000. Observations and classificati- on of roof strata behavior over longwall coal mining panels in India. Internatio- nal Journal of Rock Mechanics and Mi- ning Sciences, 37: 585-597
  4. Goodman, R. E.,1989. Introduction to Rock Mechanics. 2nd Edition, John Wiley & Sons, New York Hoek, E., and Brown, E.T., 1997. Practical Es- timates of Rock Mass Strength. Inter- national Journal of Rock Mechanics and Mining Sciences, 34: 1165-1186
  5. Hoek, E., et al., 2002. Hoek-Brown Failure Cri- terion–2002 Edition. Proceedings of the 2nd North American Rock Mechanics Symposium, Toronto, Canada Kidybinski, A., 1977.
  6. Methods of Investigations, Estimation and Classification of Roof in Mines in the U.S.A. for the Selecti- on of Suitable Mechanized Supports for Longwalls. Final report submitted to U.S. Department of Energy, DOE/TIC- 11483: 116 Kidybinski, A., 1979. Experience With Hard Rock Penetrometers Used for Mine Rock Stability Predictions. Procee- dings of the 4th International Congress on Rock Mechanic, ISRM, Montreux, France Kidybinski, A., 1982. Classification of Rocks for Longwall Caveability. Proceedings State-of-the-Art of Ground Control in Longwall Mining and Mining Subsiden- ce, SME-AIME Korovkin, U. A., 1980. On the Classification of the Roofs of Mechanized Coal Faces. Ugol, 1: 18-22
  7. Mark, C., 1999. Application of the Coal Mine Roof Rating (CMRR) to extended cuts. Mining Engineering, 51: 52– 56 Mark, C., Molinda, G.M. and Barton, T., 2002. New Developments With The Coal Mine Roof Rating. Proceedings of the 21st International Conference on Gro- und Control in Mining. S.S. Peng et al., West Virginia University, Morgantown Molind